This patch implements LD eFuse programming support. Armada 385 contains two LD eFuse lines, each is 256 bit long with one additional lock bit. LD 0 line is mapped to U-Boot fuse bank 64 and LD 1 line to fuse bank 65. U-Boot 32-bit fuse words 0-8 are mapped to LD eFuse line bits 0-255. U-Boot fuse word 9 is mapped to LD eFuse line lock bit.
So to program LD 1 General Purpose Data line, use U-Boot fuse command:
=> fuse prog -y 65 0 0x76543210 => fuse prog -y 65 1 0xfedcba98 => fuse prog -y 65 2 0x76543210 => fuse prog -y 65 3 0xfedcba98 => fuse prog -y 65 4 0x76543210 => fuse prog -y 65 5 0xfedcba98 => fuse prog -y 65 6 0x76543210 => fuse prog -y 65 7 0xfedcba98 => fuse prog -y 65 8 0x1
Signed-off-by: Pali Rohár pali@kernel.org --- arch/arm/mach-mvebu/efuse.c | 43 ++++++++++++++++++++++++ arch/arm/mach-mvebu/include/mach/efuse.h | 4 +++ 2 files changed, 47 insertions(+)
diff --git a/arch/arm/mach-mvebu/efuse.c b/arch/arm/mach-mvebu/efuse.c index 80318c339eb7..4b0433782171 100644 --- a/arch/arm/mach-mvebu/efuse.c +++ b/arch/arm/mach-mvebu/efuse.c @@ -132,6 +132,46 @@ static int prog_efuse(int nr, struct efuse_val *new_val, u32 mask0, u32 mask1) return res; }
+int mvebu_prog_ld_efuse(int ld1, u32 word, u32 val) +{ + int i, res; + u32 line[EFUSE_LD_WORDS]; + + res = mvebu_efuse_init_hw(); + if (res) + return res; + + mvebu_read_ld_efuse(ld1, line); + + /* check if lock bit is already programmed */ + if (line[EFUSE_LD_WORDS - 1]) + return -EPERM; + + /* check if word is valid */ + if (word >= EFUSE_LD_WORDS) + return -EINVAL; + + /* check if there is some bit for programming */ + if (val == (line[word] & val)) + return 0; + + enable_efuse_program(); + + mvebu_read_ld_efuse(ld1, line); + line[word] |= val; + + for (i = 0; i < EFUSE_LD_WORDS; i++) { + writel(line[i], ld_efuses + i); + mdelay(1); + } + + mdelay(5); + + disable_efuse_program(); + + return 0; +} + int mvebu_efuse_init_hw(void) { int ret; @@ -254,6 +294,9 @@ int fuse_prog(u32 bank, u32 word, u32 val) { int res = 0;
+ if (bank == EFUSE_LD0_LINE || bank == EFUSE_LD1_LINE) + return mvebu_prog_ld_efuse(bank == EFUSE_LD1_LINE, word, val); + /* * NOTE: Fuse line should be written as whole. * So how can we do that with this API? diff --git a/arch/arm/mach-mvebu/include/mach/efuse.h b/arch/arm/mach-mvebu/include/mach/efuse.h index 122e735f2fc7..b125c30beb8c 100644 --- a/arch/arm/mach-mvebu/include/mach/efuse.h +++ b/arch/arm/mach-mvebu/include/mach/efuse.h @@ -70,4 +70,8 @@ int mvebu_write_efuse(int nr, struct efuse_val *val);
int mvebu_lock_efuse(int nr);
+void mvebu_read_ld_efuse(int ld1, u32 *line); + +int mvebu_prog_ld_efuse(int ld1, u32 word, u32 val); + #endif