Hi Alison,
On Tuesday, May 28, 2013 10:55:47 AM, Alison Wang wrote:
VF610TWR is a board based on Vybrid VF610 SoC.
This patch adds basic support for Vybrid VF610TWR board.
Signed-off-by: Alison Wang b18965@freescale.com Signed-off-by: Jason Jin Jason.jin@freescale.com Signed-off-by: TsiChung Liew tsicliew@gmail.com
[...]
diff --git a/include/configs/vf610twr.h b/include/configs/vf610twr.h new file mode 100644 index 0000000..77fe893 --- /dev/null +++ b/include/configs/vf610twr.h @@ -0,0 +1,140 @@ +/*
- Copyright 2013 Freescale Semiconductor, Inc.
- Configuration settings for the Freescale Vybrid vf610twr board.
- This program is free software; you can redistribute it and/or
- modify it under the terms of the GNU General Public License as
- published by the Free Software Foundation; either version 2 of
- the License, or (at your option) any later version.
- This program is distributed in the hope that it will be useful,
- but WITHOUT ANY WARRANTY; without even the implied warranty of
- MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- GNU General Public License for more details.
- You should have received a copy of the GNU General Public License
- along with this program; if not, write to the Free Software
- Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- MA 02111-1307 USA
- */
+#ifndef __CONFIG_H +#define __CONFIG_H
+#include <asm/arch/imx-regs.h> +#include <config_cmd_default.h>
+#define CONFIG_VF610
+#define CONFIG_DISPLAY_CPUINFO +#define CONFIG_DISPLAY_BOARDINFO
+#define CONFIG_MACH_TYPE 4146
+#define CONFIG_SKIP_LOWLEVEL_INIT
+/* Enable passing of ATAGs */ +#define CONFIG_CMDLINE_TAG
+#define CONFIG_CMD_FUSE +#ifdef CONFIG_CMD_FUSE +#define CONFIG_MXC_OCOTP +#endif
+/* Size of malloc() pool */ +#define CONFIG_SYS_MALLOC_LEN (CONFIG_ENV_SIZE + 2 * 1024 * 1024)
+#define CONFIG_BOARD_EARLY_INIT_F
+#define CONFIG_FSL_LPUART +#define LPUART_BASE UART1_BASE
+/* Allow to overwrite serial and ethaddr */ +#define CONFIG_ENV_OVERWRITE +#define CONFIG_SYS_UART_PORT (1) +#define CONFIG_BAUDRATE 115200
+#undef CONFIG_CMD_IMLS
+#define CONFIG_MMC +#define CONFIG_FSL_ESDHC +#define CONFIG_SYS_FSL_ESDHC_ADDR 0 +#define CONFIG_SYS_FSL_ESDHC_NUM 1
+#define CONFIG_SYS_FSL_ERRATUM_ESDHC111
+#define CONFIG_CMD_MMC +#define CONFIG_GENERIC_MMC +#define CONFIG_CMD_FAT +#define CONFIG_DOS_PARTITION
+#define CONFIG_CMD_PING +#define CONFIG_CMD_DHCP +#define CONFIG_CMD_MII +#define CONFIG_CMD_NET +#define CONFIG_FEC_MXC +#define CONFIG_MII +#define IMX_FEC_BASE ENET_BASE_ADDR +#define CONFIG_FEC_XCV_TYPE RMII +#define CONFIG_FEC_MXC_PHYADDR 0
Why don't you add support for the 2nd FEC? Do you plan to do it later?
+#define CONFIG_PHYLIB +#define CONFIG_PHY_MICREL
+#define CONFIG_BOOTDELAY 3
+#define CONFIG_SYS_TEXT_BASE 0x3f008000
+/* Miscellaneous configurable options */ +#define CONFIG_SYS_LONGHELP /* undef to save memory */ +#define CONFIG_SYS_HUSH_PARSER /* use "hush" command parser */ +#define CONFIG_SYS_PROMPT_HUSH_PS2 "> " +#define CONFIG_SYS_PROMPT "Vybrid U-Boot > " +#undef CONFIG_AUTO_COMPLETE +#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ +#define CONFIG_SYS_PBSIZE \
(CONFIG_SYS_CBSIZE + sizeof(CONFIG_SYS_PROMPT) + 16)+#define CONFIG_SYS_MAXARGS 16 /* max number of command args */ +#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE
+#define CONFIG_CMD_MEMTEST +#define CONFIG_SYS_MEMTEST_START 0x80010000 +#define CONFIG_SYS_MEMTEST_END 0x87C00000
Please make sure to have runtime-tested this address range with the mtest command since bad mtest addresses are the reason why CONFIG_CMD_MEMTEST has been removed from the default commands.
[...]
Best regards, Benoît