On Jul 7, 2008, at 10:17 AM, Luigi 'Comio' Mantellini wrote:
drivers/i2c/fsl_i2c.c | 68 ++++++++++++++++++++++++++++++++++++++++ +++++++++ 1 files changed, 68 insertions(+), 0 deletions(-)
diff --git a/drivers/i2c/fsl_i2c.c b/drivers/i2c/fsl_i2c.c index 0690340..8fd73c0 100644 --- a/drivers/i2c/fsl_i2c.c +++ b/drivers/i2c/fsl_i2c.c @@ -78,6 +78,73 @@ static const struct fsl_i2c *i2c_dev[2] = {
- register. See the application note AN2919 "Determining the I2C
Frequency
- Divider Ratio for SCL"
*/ +#if defined(CONFIG_MCF547x_8x) || defined(CONFIG_MCF5445x) +static const struct {
- u8 fdr;
- unsigned short divider;
+} fsl_i2c_speed_map[] = {
{.fdr=0x20, .divider= 20}, {.fdr=0x21, .divider= 22},{.fdr=0x22, .divider= 24},
{.fdr=0x23, .divider= 26}, {.fdr=0x00, .divider= 28},{.fdr=0x24, .divider= 28},
{.fdr=0x01, .divider= 30}, {.fdr=0x25, .divider= 32},{.fdr=0x02, .divider= 34},
{.fdr=0x26, .divider= 36}, {.fdr=0x03, .divider= 40},{.fdr=0x27, .divider= 40},
{.fdr=0x04, .divider= 44}, {.fdr=0x05, .divider= 48}, /*{.fdr=0x28, .divider= 48},*/
{.fdr=0x06, .divider= 56}, /*{.fdr=0x29, .divider= 56},*/{.fdr=0x2A, .divider= 64},
{.fdr=0x07, .divider= 68}, {.fdr=0x2B, .divider= 72},{.fdr=0x08, .divider= 80},
- /*{.fdr=0x2C, .divider= 80},*/ {.fdr=0x09, .divider= 88},
{.fdr=0x2D, .divider= 96},
{.fdr=0x0A, .divider= 104}, {.fdr=0x2E, .divider= 112},{.fdr=0x0B, .divider= 128},
- /*{.fdr=0x2F, .divider= 128},*/ {.fdr=0x0C, .divider= 144},
{.fdr=0x0D, .divider= 160},
- /*{.fdr=0x30, .divider= 160},*/ {.fdr=0x0E, .divider= 192}, /
*{.fdr=0x31, .divider= 192},*/
{.fdr=0x32, .divider= 224}, {.fdr=0x0F, .divider= 240},{.fdr=0x33, .divider= 256},
{.fdr=0x10, .divider= 288}, {.fdr=0x11, .divider= 320}, /*{.fdr=0x34, .divider= 320},*/
{.fdr=0x12, .divider= 384}, /*{.fdr=0x35, .divider= 384},*/{.fdr=0x36, .divider= 448},
- /*{.fdr=0x13, .divider= 480},*/ {.fdr=0x37, .divider= 512},
{.fdr=0x14, .divider= 576},
{.fdr=0x15, .divider= 640}, /*{.fdr=0x38, .divider= 640},*/{.fdr=0x16, .divider= 768},
- /*{.fdr=0x39, .divider= 768},*/ {.fdr=0x3A, .divider= 896},
{.fdr=0x17, .divider= 960},
{.fdr=0x3B, .divider=1024}, {.fdr=0x18, .divider=1152},{.fdr=0x19, .divider=1280},
- /*{.fdr=0x3C, .divider=1280},*/ {.fdr=0x1A, .divider=1536}, /
*{.fdr=0x3D, .divider=1536},*/
{.fdr=0x3E, .divider=1792}, {.fdr=0x1B, .divider=1920},{.fdr=0x3F, .divider=2048},
{.fdr=0x1C, .divider=2304}, {.fdr=0x1D, .divider=2560},{.fdr=0x1E, .divider=3072},
{.fdr=0x1F, .divider=3840}, {.fdr=0x00, .divider=-1}+};
NAK. There's a better way to do this. Don't just copy/paste my data structures and comment-out specific fields like this.
I'm on vacation this week. Next week, I'll take a closer look at your patch and suggest something better.
What is the reason you are commenting-out those specific entries in fsl_i2c_speed_map[]?