Hello,
Am 05.03.2011 14:57, schrieb Egon Boormans:
It looks like the bootcmd doesn't get set to the CONFIG_BOOTCOMMAND value in the 'include/configs/omap3_beagle.h' file. This value makes it into the 'include/autoconf.mk' file but not into the printenv of the u-boot. If I
...
NAND: 256 MiB MMC: OMAP SD/MMC: 0 In: serial Out: serial Err: serial Beagle xM Rev A No EEPROM on expansion board Die ID #6cf600011ff00000015739eb0c00600f Hit any key to stop autoboot: 0 mmc - MMC sub system
Usage:
Looks like you have a Beagle XM with NAND and you've saved the environment there. Try "env default -f; saveenv" to reset the environment there to the default values. You could just clean the environment in the NAND too. For further reference read instructions for the BeagleBoard (w/o XM), the NAND on some XM doesn't officially exists and therefor is not mentionend in any documentation for the XM-version.
Regards,
Alexander Holler