Dear All,
we are using MPC8548 based custom board, with DDR2 memory. we have successfully ported U-boot 1.3.1 and linux 2.6.19.
but sometimes the board is hanging at the following conditions
- afer relocating to RAM
U-Boot 1.3.1 (Aug 21 2009 - 16:42:56)
CPU: 8548_E, Version: 2.1, (0x80390021) Core: E500, Version: 2.2, (0x80210022) Clock Configuration: CPU:1056 MHz, CCB: 528 MHz, DDR: 264 MHz, LBC: 66 MHz L1: D-cache 32 kB enabled I-cache 32 kB enabled Board: CDS Version 0xf8, PCI Slot 4 CPU Board Revision 255.248 (0xfff8) I2C: ready DRAM: Initializing SDRAM: 64 MB DDR: 1024 MB
HANG....
- sometime it will boot u-boot, HANG while executing u-boot commands - sometime booting Linux, HANG while running some applications in linux
what could be the reason, can anyboby explain
thank you mrp
Confidentiality Notice
The information contained in this electronic message and any attachments to this message are intended for the exclusive use of the addressee(s) and may contain confidential or privileged information. If you are not the intended recipient, please notify the sender at Bharat Electronics or support@bel.co.in immediately and destroy all copies of this message and any attachments.