Hello Andrew, This patch series are ok, Please help add Reviewed-by: Ryan Chen ryan_chen@aspeedtech.com
-----Original Message----- From: Andrew Jeffery andrew@aj.id.au Sent: Wednesday, February 16, 2022 7:57 AM To: u-boot@lists.denx.de Cc: maxims@google.com; ChiaWei Wang chiawei_wang@aspeedtech.com; Ryan Chen ryan_chen@aspeedtech.com; Troy Lee troy_lee@aspeedtech.com; BMC-SW BMC-SW@aspeedtech.com; joel@jms.id.au; eajames@linux.ibm.com Subject: [PATCH 0/3] gpio: Add AST2[456]00 GPIO driver
Hello,
This series adds support for the GPIO controller found in Aspeed's AST2400, AST2500 and AST2600 BMC SoCs.
By and large I've just extracted the work from Aspeed's SDK and submitted it. However, the driver as found in the SDK was in-turn extracted from Linux, cut down and adapted to u-boot. I've adjusted the copyright to reflect this (as found in Linux) after discussion with Troy and Ryan.
From there I've polished the patch in accordance with checkpatch and done some tweaks to improve consistency with the kernel driver (mainly the file name).
I've lightly tested the driver as-presented under qemu. That said, as the code has been lifted from Aspeed's SDK (and in-turn from Linux) the implementation has seen much wider testing.
Please review!
Andrew
Andrew Jeffery (3): gpio: Add Aspeed GPIO driver ARM: dts: ast2500: Add ngpios property to GPIO node configs: evb-ast2[56]00: Enable GPIO control
arch/arm/dts/ast2500.dtsi | 1 + configs/evb-ast2500_defconfig | 3 + configs/evb-ast2600_defconfig | 3 + drivers/gpio/Kconfig | 7 + drivers/gpio/Makefile | 1 + drivers/gpio/gpio-aspeed.c | 299 ++++++++++++++++++++++++++++++++++ 6 files changed, 314 insertions(+) create mode 100644 drivers/gpio/gpio-aspeed.c
-- 2.32.0