Re: [PATCH V2 1/2] ARM: dts: rmobile: beacon-renesom: Enable USB and ethernet ref clocks

30 Aug 2021

On Tue, Aug 24, 2021 at 1:41 PM Adam Ford aford173@gmail.com wrote:
...
There are two versaclock programmable clock chips used to provide
reference clocks for both USB and Ethernet.  Enable the driver
in the configs to run these clocks.
Signed-off-by: Adam Ford aford173@gmail.com
Go ahead and drop this now.
I have FIT working with multiple DTB's from one config file. I'll push
a new series to unify M/N/H boards into one defconfig, then add new
the functions to the one remaining board.  That should eliminate a lot
of duplicated entries.
adam
...
V2: Move from defconfig to kconfig

diff --git a/arch/arm/mach-rmobile/Kconfig.64 b/arch/arm/mach-rmobile/Kconfig.64
index a6dcce180b..c90ea06692 100644
--- a/arch/arm/mach-rmobile/Kconfig.64
+++ b/arch/arm/mach-rmobile/Kconfig.64
@@ -76,18 +76,24 @@ config TARGET_BEACON_RZG2H
        select R8A774E1
        select RZ_G2
        select PINCTRL_PFC_R8A774E1

  select CLK_CCF


  select CLK_VERSACLOCK




config TARGET_BEACON_RZG2M
        bool "Beacon EmbeddedWorks RZ/G2M Dev Kit"
        select R8A774A1
        select RZ_G2
        select PINCTRL_PFC_R8A774A1

  select CLK_CCF


  select CLK_VERSACLOCK




config TARGET_BEACON_RZG2N
        bool "Beacon EmbeddedWorks RZ/G2N Dev Kit"
        select R8A774B1
        select RZ_G2
        select PINCTRL_PFC_R8A774B1

  select CLK_CCF


  select CLK_VERSACLOCK




config TARGET_CONDOR
        bool "Condor board"
--
2.25.1

    