Re: [PATCH 2/2] ARM: dts: stm32: Fix GPIO hog flags on DHCOM DRC02

Hi Marek

On 1/2/21 5:44 PM, Marek Vasut wrote:

The GPIO hog flags are ignored by gpiolib-of.c now, set the flags to 0. Since GPIO_ACTIVE_HIGH is defined as 0, this change only increases the correctness of the DT.

Signed-off-by: Marek Vasut marex@denx.de Cc: Patrice Chotard patrice.chotard@st.com Cc: Patrick Delaunay patrick.delaunay@st.com

---

arch/arm/dts/stm32mp15xx-dhcom-drc02.dts | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts index e8508aa4d5a..4948ccd4014 100644 --- a/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts +++ b/arch/arm/dts/stm32mp15xx-dhcom-drc02.dts @@ -37,7 +37,7 @@ */ usb-hub { gpio-hog;

• gpios = <8 GPIO_ACTIVE_HIGH>;
  

• gpios = <8 0>;
  

  output-high; line-name = "rs485-rx-en"; };

@@ -65,7 +65,7 @@ */ usb-hub { gpio-hog;

• gpios = <2 GPIO_ACTIVE_HIGH>;
  

• gpios = <2 0>;
  

  output-high; line-name = "usb-hub-reset"; };

Reviewed-by: Patrice Chotard patrice.chotard@st.com

Thanks