From: Fabio Estevam festevam@denx.de
Since commit 1fa43cad8625 ("video: Drop references to CONFIG_VIDEO et al") the mx51evk_video.c is no longer used.
Remove the unused file.
Signed-off-by: Fabio Estevam festevam@denx.de --- board/freescale/mx51evk/mx51evk_video.c | 98 ------------------------- 1 file changed, 98 deletions(-) delete mode 100644 board/freescale/mx51evk/mx51evk_video.c
diff --git a/board/freescale/mx51evk/mx51evk_video.c b/board/freescale/mx51evk/mx51evk_video.c deleted file mode 100644 index 3715c5d738..0000000000 --- a/board/freescale/mx51evk/mx51evk_video.c +++ /dev/null @@ -1,98 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * Copyright (C) 2012 Freescale Semiconductor, Inc. - * Fabio Estevam fabio.estevam@freescale.com - */ - -#include <common.h> -#include <env.h> -#include <linux/list.h> -#include <asm/gpio.h> -#include <asm/arch/iomux-mx51.h> -#include <linux/fb.h> -#include <ipu_pixfmt.h> - -#define MX51EVK_LCD_3V3 IMX_GPIO_NR(4, 9) -#define MX51EVK_LCD_5V IMX_GPIO_NR(4, 10) -#define MX51EVK_LCD_BACKLIGHT IMX_GPIO_NR(3, 4) - -static struct fb_videomode const claa_wvga = { - .name = "CLAA07LC0ACW", - .refresh = 57, - .xres = 800, - .yres = 480, - .pixclock = 37037, - .left_margin = 40, - .right_margin = 60, - .upper_margin = 10, - .lower_margin = 10, - .hsync_len = 20, - .vsync_len = 10, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -}; - -static struct fb_videomode const dvi = { - .name = "DVI panel", - .refresh = 60, - .xres = 1024, - .yres = 768, - .pixclock = 15385, - .left_margin = 220, - .right_margin = 40, - .upper_margin = 21, - .lower_margin = 7, - .hsync_len = 60, - .vsync_len = 10, - .sync = 0, - .vmode = FB_VMODE_NONINTERLACED -}; - -void setup_iomux_lcd(void) -{ - /* DI2_PIN15 */ - imx_iomux_v3_setup_pad(MX51_PAD_DI_GP4__DI2_PIN15); - - /* Pad settings for DI2_DISP_CLK */ - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI2_DISP_CLK__DI2_DISP_CLK, - PAD_CTL_PKE | PAD_CTL_DSE_MAX | PAD_CTL_SRE_SLOW)); - - /* Turn on 3.3V voltage for LCD */ - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D12__GPIO4_9, - NO_PAD_CTRL)); - gpio_direction_output(MX51EVK_LCD_3V3, 1); - - /* Turn on 5V voltage for LCD */ - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_CSI2_D13__GPIO4_10, - NO_PAD_CTRL)); - gpio_direction_output(MX51EVK_LCD_5V, 1); - - /* Turn on GPIO backlight */ - imx_iomux_v3_setup_pad(NEW_PAD_CTRL(MX51_PAD_DI1_D1_CS__GPIO3_4, - NO_PAD_CTRL)); - gpio_direction_output(MX51EVK_LCD_BACKLIGHT, 1); -} - -int board_video_skip(void) -{ - int ret; - char const *e = env_get("panel"); - - if (e) { - if (strcmp(e, "claa") == 0) { - ret = ipuv3_fb_init(&claa_wvga, 1, IPU_PIX_FMT_RGB565); - if (ret) - printf("claa cannot be configured: %d\n", ret); - return ret; - } - } - - /* - * 'panel' env variable not found or has different value than 'claa' - * Defaulting to dvi output. - */ - ret = ipuv3_fb_init(&dvi, 0, IPU_PIX_FMT_RGB24); - if (ret) - printf("dvi cannot be configured: %d\n", ret); - return ret; -}