SPL_SERIAL_SUPPORT and SPL_DRIVERS_MISC were previously enabled through rk3399_common.h. This change implies these options through Kconfig.
These need to always be active for the RK3399, as follows: - SPL_SERIAL_SUPPORT is needed to pass the SPL build - SPL_DRIVERS_MISC is needed to pass the SPL build
Signed-off-by: Philipp Tomsich philipp.tomsich@theobroma-systems.com ---
arch/arm/mach-rockchip/Kconfig | 2 ++ include/configs/rk3399_common.h | 2 -- 2 files changed, 2 insertions(+), 2 deletions(-)
diff --git a/arch/arm/mach-rockchip/Kconfig b/arch/arm/mach-rockchip/Kconfig index 545c19e..0d85c2f 100644 --- a/arch/arm/mach-rockchip/Kconfig +++ b/arch/arm/mach-rockchip/Kconfig @@ -94,6 +94,8 @@ config ROCKCHIP_RK3399 select SUPPORT_SPL select SPL select SPL_SEPARATE_BSS + select SPL_SERIAL_SUPPORT + select SPL_DRIVERS_MISC select ENABLE_ARM_SOC_BOOT0_HOOK select DEBUG_UART_BOARD_INIT help diff --git a/include/configs/rk3399_common.h b/include/configs/rk3399_common.h index 54ea97b..6c9d760 100644 --- a/include/configs/rk3399_common.h +++ b/include/configs/rk3399_common.h @@ -16,8 +16,6 @@ #define CONFIG_SYS_CBSIZE 1024 #define CONFIG_SKIP_LOWLEVEL_INIT #define CONFIG_SPL_FRAMEWORK -#define CONFIG_SPL_DRIVERS_MISC_SUPPORT -#define CONFIG_SPL_SERIAL_SUPPORT #if defined(CONFIG_SPL_SPI_SUPPORT) #define CONFIG_SPL_SPI_LOAD #endif