Hi Alison,
On Tuesday, May 28, 2013 10:55:42 AM, Alison Wang wrote:
This patch adds generic codes to support Freescale's Vybrid VF610 CPU.
It aligns Vybrid VF610 platform with i.MX platform. As there are some differences between VF610 and i.MX platforms, the specific codes are in the arch/arm/cpu/armv7/vf610 directory.
Signed-off-by: Alison Wang b18965@freescale.com
[...]
diff --git a/doc/README.vf610 b/doc/README.vf610 new file mode 100644 index 0000000..38cf5cf --- /dev/null +++ b/doc/README.vf610 @@ -0,0 +1,10 @@ +U-Boot for Freescale Vybrid VF610
+This file contains information for the port of U-Boot to the Freescale Vybrid +VF610 SoC.
+1. CONVENTIONS FOR FUSE ASSIGNMENTS +-----------------------------------
+1.1 MAC Address: It is stored in fuse bank 4, with the 16 msbs in word 2 and the
- 32 lsbs in word 3.
The hunk below is still missing:
doc/README.mxc_ocotp: --- on MXC
This IP can be found on the following SoCs: + - Vybrid VF610, - i.MX6.
Note that this IP is different from albeit similar to the IPs of the same name ---
Apart from that, this patch is correct.
Best regards, Benoît