Hi Gregory,
On Mon, Dec 14, 2015 at 10:37 AM, Gregory CLEMENT gregory.clement@free-electrons.com wrote:
During the initialization of PHY the gigabit bit capable is set if the controller is a GEM. However, for sama5d4, the GEM is not gigabit capable. Improperly setting the GBE capability leads to an unresponsive MAC controller. This patch fix this behavior allowing to use the gmac with the sama5d4.
Suggested-by: Nicolas Ferre nicolas.ferre@atmel.com Signed-off-by: Gregory CLEMENT gregory.clement@free-electrons.com
drivers/net/macb.c | 7 +++++-- 1 file changed, 5 insertions(+), 2 deletions(-)
diff --git a/drivers/net/macb.c b/drivers/net/macb.c index a5c1880..642717d 100644 --- a/drivers/net/macb.c +++ b/drivers/net/macb.c @@ -480,8 +480,11 @@ static int macb_phy_init(struct macb_device *macb) return 0; }
/* First check for GMAC */if (macb_is_gem(macb)) {
/** First check for GMAC, but not the one on SAMA5D4 which is* not gigabit capabale*/if (macb_is_gem(macb) && ! cpu_is_sama5d4()) {
Is there not some other property that can identify the lack of Gigabit support in the "GEM"? It would be better to not have to keep track of the next processor and the one after that which has the same situation.
lpa = macb_mdio_read(macb, MII_STAT1000); if (lpa & (LPA_1000FULL | LPA_1000HALF)) {-- 2.5.0
U-Boot mailing list U-Boot@lists.denx.de http://lists.denx.de/mailman/listinfo/u-boot