Things have stabilized quite a lot on the u-boot front for the Keymile kmp204x/kmcoge4 board. There are a few remaining patches that should get merged to have a complete support of the architecture/board in u-boot. These include: - support for some additional functions of the QRIO board reset/control CPLD (LEDs, Factory Test signal) - better reset sequence according to the tests/problems noticed during the development - an update to the RCW (some external interrupts are unused and set as GPIOs now) - an additionnal workaround in the PBL file (with an implementation enhancement for a previous one).
Stefan Bigler (2): kmp204x: Add support for the unit LEDs kmp204x: handle dip-switch for factory settings
Valentin Longchamp (6): kmp204x: selftest/factory test pin support kmp204x: update the CONFIG_PRAM and CONFIG_KM_RESERVED_PRAM defines kmp204x: complete the reset sequence and PRST configuration kmp204x: update the RCW kmp204x: add workaround for A-004849 kmp204x: enable the errata command
board/keymile/kmp204x/kmp204x.c | 75 ++++++++++++++++++++++++++++++----- board/keymile/kmp204x/kmp204x.h | 3 ++ board/keymile/kmp204x/pbi.cfg | 43 +++++++++++++++++--- board/keymile/kmp204x/pci.c | 17 ++++---- board/keymile/kmp204x/qrio.c | 29 +++++++++++++- board/keymile/kmp204x/rcw_kmp204x.cfg | 2 +- include/configs/km/kmp204x-common.h | 17 ++++---- 7 files changed, 151 insertions(+), 35 deletions(-)