On 10/14/24 9:06 AM, Sky Huang wrote:
From: "SkyLake.Huang" skylake.huang@mediatek.com
Remove unnecessary CL22 phy reset before ethernet phy driver probe. Lots of ethernet phys requires driver to load firmware. Before that, CL22 phy reset may lead to malfunction.
Signed-off-by: SkyLake.Huang skylake.huang@mediatek.com
drivers/net/phy/phy.c | 2 -- 1 file changed, 2 deletions(-)
diff --git a/drivers/net/phy/phy.c b/drivers/net/phy/phy.c index 716a1d46111..e6fed8c41d7 100644 --- a/drivers/net/phy/phy.c +++ b/drivers/net/phy/phy.c @@ -839,8 +839,6 @@ struct phy_device *phy_find_by_mask(struct mii_dev *bus, uint phy_mask) static void phy_connect_dev(struct phy_device *phydev, struct udevice *dev, phy_interface_t interface) {
- /* Soft Reset the PHY */
- phy_reset(phydev); if (phydev->dev && phydev->dev != dev) { printf("%s:%d is connected to %s. Reconnecting to %s\n", phydev->bus->name, phydev->addr,
This needs clarification and likely has to be handled differently. Removing the reset would leave the PHY in potentially undefined state.
Which PHY is affected by this ?