It was noticed that when `make distclean' is run, the make process terminates with error reporting something like:
rm: cannot remove '/tmp/foobar/': Is a directory make: *** [clobber] Error 1
The problem is that the list of files targeted for removal includes a directory in case CONFIG_SPL_TARGET is not set.
The fix has been tested as follows:
Ran several times the following sequence of commands:
CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make O=/tmp/foobar smdk5250_config CROSS_COMPILE=/usr/bin/arm-linux-gnueabi- make O=/tmp/foobar distclean
it did not cause an error, it used to before this change.
Signed-off-by: Vadim Bendebury vbendeb@chromium.org --- Makefile | 4 +++- 1 file changed, 3 insertions(+), 1 deletion(-)
diff --git a/Makefile b/Makefile index 12763ce..23f266a 100644 --- a/Makefile +++ b/Makefile @@ -406,8 +406,10 @@ ALL-y += $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map ALL-$(CONFIG_NAND_U_BOOT) += $(obj)u-boot-nand.bin ALL-$(CONFIG_ONENAND_U_BOOT) += $(obj)u-boot-onenand.bin ALL-$(CONFIG_SPL) += $(obj)spl/u-boot-spl.bin -ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) ALL-$(CONFIG_OF_SEPARATE) += $(obj)u-boot.dtb $(obj)u-boot-dtb.bin +ifneq ($(CONFIG_SPL_TARGET),) +ALL-$(CONFIG_SPL) += $(obj)$(subst ",,$(CONFIG_SPL_TARGET)) +endif
# enable combined SPL/u-boot/dtb rules for tegra ifneq ($(CONFIG_TEGRA),)