
From: Marcel Ziswiler marcel.ziswiler@toradex.com
Rather than using odd implicit blob-ext naming, explicitly specify the type to be of blob-ext and therefore also simplify the node naming.
Signed-off-by: Marcel Ziswiler marcel.ziswiler@toradex.com
---
Changes in v1: - This was suggested by Simon on my earlier patch set upon which we decided to first break this up into a common binman dtsi and then subsequently do such further improvements.
arch/arm/dts/imx8mm-binman.dtsi | 27 ++++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-)
diff --git a/arch/arm/dts/imx8mm-binman.dtsi b/arch/arm/dts/imx8mm-binman.dtsi index 1d2895d8970..42f5246c30a 100644 --- a/arch/arm/dts/imx8mm-binman.dtsi +++ b/arch/arm/dts/imx8mm-binman.dtsi @@ -21,24 +21,28 @@ align-end = <4>; };
- blob_1: blob-ext@1 { + 1d-imem { filename = "lpddr4_pmu_train_1d_imem.bin"; size = <0x8000>; + type = "blob-ext"; };
- blob_2: blob-ext@2 { + 1d_dmem { filename = "lpddr4_pmu_train_1d_dmem.bin"; size = <0x4000>; + type = "blob-ext"; };
- blob_3: blob-ext@3 { + 2d_imem { filename = "lpddr4_pmu_train_2d_imem.bin"; size = <0x8000>; + type = "blob-ext"; };
- blob_4: blob-ext@4 { + 2d_dmem { filename = "lpddr4_pmu_train_2d_dmem.bin"; size = <0x4000>; + type = "blob-ext"; }; };
@@ -70,8 +74,9 @@ load = <CONFIG_SYS_TEXT_BASE>; type = "standalone";
- uboot_blob: blob-ext { + uboot_blob { filename = "u-boot-nodtb.bin"; + type = "blob-ext"; }; };
@@ -83,8 +88,9 @@ load = <0x920000>; type = "firmware";
- atf_blob: blob-ext { + atf_blob { filename = "bl31.bin"; + type = "blob-ext"; }; };
@@ -101,8 +107,9 @@ description = "NAME"; type = "flat_dt";
- uboot_fdt_blob: blob-ext { + uboot_fdt_blob { filename = "u-boot.dtb"; + type = "blob-ext"; }; }; }; @@ -124,14 +131,16 @@ filename = "flash.bin"; pad-byte = <0x00>;
- spl: blob-ext@1 { + spl { filename = "spl.bin"; offset = <0x0>; + type = "blob-ext"; };
- binman_uboot: blob-ext@2 { + binman_uboot: uboot { filename = "u-boot.itb"; offset = <0x57c00>; + type = "blob-ext"; }; }; };