On 24/04/2023 20:01, Igor Prusov wrote:
The AD401 board is the Amlogic A1 SoC reference board
Signed-off-by: Igor Prusov ivprusov@sberdevices.ru
MAINTAINERS | 1 + arch/arm/mach-meson/Kconfig | 1 + board/amlogic/ad401/Makefile | 4 +++ board/amlogic/ad401/ad401.c | 15 ++++++++++ configs/ad401_defconfig | 54 ++++++++++++++++++++++++++++++++++++ 5 files changed, 75 insertions(+) create mode 100644 board/amlogic/ad401/Makefile create mode 100644 board/amlogic/ad401/ad401.c create mode 100644 configs/ad401_defconfig
diff --git a/MAINTAINERS b/MAINTAINERS index 02a5a8682f..6860309896 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -150,6 +150,7 @@ L: u-boot-amlogic@groups.io T: git https://source.denx.de/u-boot/custodians/u-boot-amlogic.git F: arch/arm/mach-meson/ F: arch/arm/include/asm/arch-meson/ +F: board/amlogic/
Boards MAINTAINERS are separate, so please add a separate MAINTAINERS file in board/amlogic/ad401/, you can add me ad maintainer like other boards.
F: cmd/meson/ F: drivers/clk/meson/ F: drivers/serial/serial_meson.c diff --git a/arch/arm/mach-meson/Kconfig b/arch/arm/mach-meson/Kconfig index 519ed563c0..669ca09a00 100644 --- a/arch/arm/mach-meson/Kconfig +++ b/arch/arm/mach-meson/Kconfig @@ -75,6 +75,7 @@ config SYS_VENDOR
config SYS_BOARD string "Board name"
- default "ad401" if MESON_A1 default "p200" if MESON_GXBB default "p212" if MESON_GXL default "q200" if MESON_GXM
diff --git a/board/amlogic/ad401/Makefile b/board/amlogic/ad401/Makefile new file mode 100644 index 0000000000..e65c1215f6 --- /dev/null +++ b/board/amlogic/ad401/Makefile @@ -0,0 +1,4 @@ +# SPDX-License-Identifier: GPL-2.0+ +# (C) Copyright 2023 SberDevices, Inc.
+obj-y := ad401.o diff --git a/board/amlogic/ad401/ad401.c b/board/amlogic/ad401/ad401.c new file mode 100644 index 0000000000..356b2880bd --- /dev/null +++ b/board/amlogic/ad401/ad401.c @@ -0,0 +1,15 @@ +// SPDX-License-Identifier: GPL-2.0+ +/*
- (C) Copyright 2023 SberDevices, Inc.
- Author: Igor Prusov ivprusov@sberdevices.ru
- */
+#include <init.h> +#include <asm/arch/eth.h>
+int misc_init_r(void) +{
- meson_generate_serial_ethaddr();
- return 0;
+} diff --git a/configs/ad401_defconfig b/configs/ad401_defconfig new file mode 100644 index 0000000000..529e553bac --- /dev/null +++ b/configs/ad401_defconfig @@ -0,0 +1,54 @@ +CONFIG_ARM=y +CONFIG_ARCH_MESON=y +CONFIG_TEXT_BASE=0x00000000 +CONFIG_HAS_CUSTOM_SYS_INIT_SP_ADDR=y +CONFIG_CUSTOM_SYS_INIT_SP_ADDR=0x00200000 +CONFIG_DM_GPIO=y +CONFIG_DEFAULT_DEVICE_TREE="meson-a1-ad401" +CONFIG_SYS_PROMPT="ad401 # " +CONFIG_OF_LIBFDT_OVERLAY=y +CONFIG_MESON_A1=y +CONFIG_DEBUG_UART_BASE=0xfe001c00 +CONFIG_DEBUG_UART_CLOCK=24000000 +CONFIG_SYS_LOAD_ADDR=0x0 +CONFIG_DEBUG_UART=y +CONFIG_ANDROID_BOOT_IMAGE=y +CONFIG_FIT=y +CONFIG_FIT_SIGNATURE=y +CONFIG_OF_BOARD_SETUP=y +CONFIG_BOOTCOMMAND="run storeboot" +# CONFIG_DISPLAY_CPUINFO is not set +# CONFIG_DISPLAY_BOARDINFO is not set +# CONFIG_CMD_BDI is not set +# CONFIG_CMD_IMI is not set +CONFIG_CMD_GPIO=y +CONFIG_CMD_I2C=y +# CONFIG_CMD_LOADB is not set +# CONFIG_CMD_LOADS is not set +CONFIG_CMD_MMC=y +CONFIG_CMD_MTD=y +# CONFIG_CMD_SETEXPR is not set +CONFIG_CMD_CACHE=y +CONFIG_CMD_MTDPARTS=y +CONFIG_CMD_UBI=y +CONFIG_OF_CONTROL=y +CONFIG_ADC=y +CONFIG_SARADC_MESON=y +CONFIG_DM_I2C=y +CONFIG_SYS_I2C_MESON=y +CONFIG_LED=y +CONFIG_MISC=y +CONFIG_MTD=y +CONFIG_DM_SPI_FLASH=y +CONFIG_PHY=y +CONFIG_PINCTRL=y +CONFIG_PINCTRL_MESON_A1=y +CONFIG_DM_REGULATOR=y +CONFIG_DM_PWM=y +CONFIG_PWM_MESON=y +CONFIG_DEBUG_UART_ANNOUNCE=y +CONFIG_DEBUG_UART_SKIP_INIT=y +CONFIG_MESON_SERIAL=y +CONFIG_SPI=y +CONFIG_DM_SPI=y +CONFIG_WDT=y
With MAINTAINERS file in board dir:
Reviewed-by: Neil Armstrong neil.armstrong@linaro.org