When building U-Boot we select the architecture via Kconfig and not ARCH being passed in via the environment or make cmdline.
Cc: Po Liu po.liu@nxp.com Cc: Qiang Zhao qiang.zhao@nxp.com Signed-off-by: Tom Rini trini@konsulko.com --- As an aside, these files should be converted rST and moved to doc/board/ and the MAINTAINERS file updated to include the new documentation file too. Thanks! --- board/freescale/c29xpcie/README | 1 - board/freescale/p1010rdb/README.P1010RDB-PA | 1 - board/freescale/p1010rdb/README.P1010RDB-PB | 1 - 3 files changed, 3 deletions(-)
diff --git a/board/freescale/c29xpcie/README b/board/freescale/c29xpcie/README index 2e249cbb3a2e..a6120f1845d2 100644 --- a/board/freescale/c29xpcie/README +++ b/board/freescale/c29xpcie/README @@ -56,7 +56,6 @@ Note: 1 stands for 'off', 0 stands for 'on' Build and program U-Boot to NOR flash ================================== 1. Build u-boot.bin image example: - export ARCH=powerpc export CROSS_COMPILE=/your_path/powerpc-linux-gnu- make C293PCIE
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PA b/board/freescale/p1010rdb/README.P1010RDB-PA index 105942f7a54f..46c61237c727 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PA +++ b/board/freescale/p1010rdb/README.P1010RDB-PA @@ -98,7 +98,6 @@ instead of to CAN/UART1. Build and burn U-Boot to NOR flash ================================== 1. Build u-boot.bin image - export ARCH=powerpc export CROSS_COMPILE=/your_path/powerpc-linux-gnu- make P1010RDB_NOR
diff --git a/board/freescale/p1010rdb/README.P1010RDB-PB b/board/freescale/p1010rdb/README.P1010RDB-PB index dc82f0df0984..4a3b389877fc 100644 --- a/board/freescale/p1010rdb/README.P1010RDB-PB +++ b/board/freescale/p1010rdb/README.P1010RDB-PB @@ -128,7 +128,6 @@ To enable IFC in case of SD boot Build images for different boot mode ==================================== First setup cross compile environment on build host - $ export ARCH=powerpc $ export CROSS_COMPILE=<your-compiler-path>/powerpc-linux-gnu-
1. For NOR boot