Switch CPG settings when transitioning between HS200/HS400/SDR104 and regular modes. This is required for the SCC block to operate correctly.
Signed-off-by: Marek Vasut marek.vasut+renesas@gmail.com Cc: Masahiro Yamada yamada.masahiro@socionext.com --- V2: No change V3: No change --- drivers/mmc/renesas-sdhi.c | 28 +++++++++++++++++++++++++++- 1 file changed, 27 insertions(+), 1 deletion(-)
diff --git a/drivers/mmc/renesas-sdhi.c b/drivers/mmc/renesas-sdhi.c index 73f6bf1562..9a454ef949 100644 --- a/drivers/mmc/renesas-sdhi.c +++ b/drivers/mmc/renesas-sdhi.c @@ -292,9 +292,35 @@ out: } #endif
+static void renesas_sdhi_set_clk(struct udevice *dev) +{ + struct tmio_sd_priv *priv = dev_get_priv(dev); + struct mmc *mmc = mmc_get_mmc_dev(dev); + u32 tmp; + + if (!mmc->clock) + return; + + /* Stop the clock before changing its rate to avoid a glitch signal */ + tmp = tmio_sd_readl(priv, TMIO_SD_CLKCTL); + tmp &= ~TMIO_SD_CLKCTL_SCLKEN; + tmio_sd_writel(priv, tmp, TMIO_SD_CLKCTL); + + if ((mmc->selected_mode == UHS_SDR104) || + (mmc->selected_mode == MMC_HS_200)) { + clk_set_rate(&priv->clk, 400000000); + } else { + clk_set_rate(&priv->clk, 200000000); + } +} + static int renesas_sdhi_set_ios(struct udevice *dev) { - int ret = tmio_sd_set_ios(dev); + int ret; + + renesas_sdhi_set_clk(dev); + + ret = tmio_sd_set_ios(dev);
mdelay(10);