I have a board similar to the scb9328 that I'm working on a port to. I tried compiling a recent version of u-boot for the scb9328 target and it fails with a linker error (see below). The source was pulled from git on Feb. 10, 2007. compiler is from arm ELDK-4.0
Adding a define for CONFIG_NET_MULTI in the board config file makes the compile succeed. I don't actually have an scb9328 (or my new board yet) so I can't test it.
Is CONFIG_NET_MULTI pretty much mandatory? If so, why even have it as an option?
here's the error message:
make[1]: Leaving directory `/home/adyer/Projects/u-boot/common' UNDEF_SYM=`arm-linux-objdump -x lib_generic/libgeneric.a board/scb9328/libscb9328.a cpu/arm920t/libarm920t.a cpu/arm920t/imx/libimx.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/nand/libnand.a drivers/nand_legacy/libnand_legacy.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a |sed -n -e 's/.*(__u_boot_cmd_.*)/-u\1/p'|sort|uniq`;\ cd /home/adyer/Projects/u-boot && arm-linux-ld -Bstatic -T /home/adyer/Projects/u-boot/board/scb9328/u-boot.lds -Ttext 0x08f00000 $UNDEF_SYM cpu/arm920t/start.o \ --start-group lib_generic/libgeneric.a board/scb9328/libscb9328.a cpu/arm920t/libarm920t.a cpu/arm920t/imx/libimx.a lib_arm/libarm.a fs/cramfs/libcramfs.a fs/fat/libfat.a fs/fdos/libfdos.a fs/jffs2/libjffs2.a fs/reiserfs/libreiserfs.a fs/ext2/libext2fs.a net/libnet.a disk/libdisk.a rtc/librtc.a dtt/libdtt.a drivers/libdrivers.a drivers/nand/libnand.a drivers/nand_legacy/libnand_legacy.a drivers/sk98lin/libsk98lin.a post/libpost.a post/cpu/libcpu.a common/libcommon.a --end-group -L /home/adyer/usr/bin/../lib/gcc/arm-linux/4.0.0 -lgcc \ -Map u-boot.map -o u-boot common/libcommon.a(cmd_net.o): In function `net_check_device': /home/adyer/Projects/u-boot/common/cmd_net.c:157: undefined reference to `eth_get_dev' make: *** [u-boot] Error 1