When CONIFG_CLK is enabled, use uclass clk api to handle the clock.
Signed-off-by: Peng Fan peng.fan@nxp.com Cc: Jaehoon Chung jh80.chung@samsung.com Cc: Stefano Babic sbabic@denx.de --- drivers/mmc/fsl_esdhc.c | 22 ++++++++++++++++++---- 1 file changed, 18 insertions(+), 4 deletions(-)
diff --git a/drivers/mmc/fsl_esdhc.c b/drivers/mmc/fsl_esdhc.c index 785b9e87a6..283b03bf0f 100644 --- a/drivers/mmc/fsl_esdhc.c +++ b/drivers/mmc/fsl_esdhc.c @@ -11,6 +11,7 @@ #include <config.h> #include <common.h> #include <command.h> +#include <clk.h> #include <errno.h> #include <hwconfig.h> #include <mmc.h> @@ -121,6 +122,7 @@ struct esdhc_soc_data { struct fsl_esdhc_priv { struct fsl_esdhc *esdhc_regs; unsigned int sdhc_clk; + struct clk per_clk; unsigned int clock; unsigned int mode; unsigned int bus_width; @@ -1462,10 +1464,22 @@ static int fsl_esdhc_probe(struct udevice *dev)
init_clk_usdhc(dev->seq);
- priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq); - if (priv->sdhc_clk <= 0) { - dev_err(dev, "Unable to get clk for %s\n", dev->name); - return -EINVAL; + if (IS_ENABLED(CONFIG_CLK)) { + /* Assigned clock already set clock */ + ret = clk_get_by_name(dev, "per", &priv->per_clk); + if (ret) + printf("Failed to get per_clk\n"); + ret = clk_enable(&priv->per_clk); + if (ret) + printf("Failed to enable per_clk\n"); + + priv->sdhc_clk = clk_get_rate(&priv->per_clk); + } else { + priv->sdhc_clk = mxc_get_clock(MXC_ESDHC_CLK + dev->seq); + if (priv->sdhc_clk <= 0) { + dev_err(dev, "Unable to get clk for %s\n", dev->name); + return -EINVAL; + } }
ret = fsl_esdhc_init(priv, plat);