This patch adds SPL booting support (NOR flash) for the MPC5200 platforms.
Signed-off-by: Stefan Roese sr@denx.de --- Changes in v2: - Rebased on Tom's SPL framework patches v4
Changes in v3: - Don't use special MPC5xxx memcpy in SPL - Move linker symbols to header spl.h (checkpatch)
arch/powerpc/cpu/mpc5xxx/Makefile | 4 ++ arch/powerpc/cpu/mpc5xxx/spl_boot.c | 79 +++++++++++++++++++++++++++++++++ arch/powerpc/cpu/mpc5xxx/start.S | 22 +++++++++ arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds | 57 ++++++++++++++++++++++++ arch/powerpc/include/asm/spl.h | 31 +++++++++++++ arch/powerpc/lib/Makefile | 10 +++++ 6 files changed, 203 insertions(+) create mode 100644 arch/powerpc/cpu/mpc5xxx/spl_boot.c create mode 100644 arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds create mode 100644 arch/powerpc/include/asm/spl.h
diff --git a/arch/powerpc/cpu/mpc5xxx/Makefile b/arch/powerpc/cpu/mpc5xxx/Makefile index 1a088b7..8de2c13 100644 --- a/arch/powerpc/cpu/mpc5xxx/Makefile +++ b/arch/powerpc/cpu/mpc5xxx/Makefile @@ -41,6 +41,10 @@ COBJS-y += speed.o COBJS-$(CONFIG_CMD_USB) += usb_ohci.o COBJS-$(CONFIG_CMD_USB) += usb.o
+ifdef CONFIG_SPL_BUILD +COBJS-y += spl_boot.o +endif + SRCS := $(START:.o=.S) $(SOBJS:.o=.S) $(COBJS-y:.o=.c) OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS-y)) START := $(addprefix $(obj),$(SSTART) $(CSTART)) diff --git a/arch/powerpc/cpu/mpc5xxx/spl_boot.c b/arch/powerpc/cpu/mpc5xxx/spl_boot.c new file mode 100644 index 0000000..9f14127 --- /dev/null +++ b/arch/powerpc/cpu/mpc5xxx/spl_boot.c @@ -0,0 +1,79 @@ +/* + * Copyright (C) 2012 Stefan Roese sr@denx.de + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <common.h> +#include <spl.h> + +DECLARE_GLOBAL_DATA_PTR; + +/* + * Needed to align size SPL image to a 4-byte length + */ +u32 end_align __attribute__ ((section(".end_align"))); + +/* + * Return selected boot device. On MPC5200 its only NOR flash right now. + */ +u32 spl_boot_device(void) +{ + return BOOT_DEVICE_NOR; +} + +/* + * SPL version of board_init_f() + */ +void board_init_f(ulong bootflag) +{ + end_align = (u32)__spl_flash_end; + + /* + * First we need to initialize the SDRAM, so that the real + * U-Boot or the OS (Linux) can be loaded + */ + initdram(0); + + /* Clear bss */ + memset(__bss_start, '\0', __bss_end__ - __bss_start); + + /* + * Init global_data pointer. Has to be done before calling + * get_clocks(), as it stores some clock values into gd needed + * later on in the serial driver. + */ + /* Pointer is writable since we allocated a register for it */ + gd = (gd_t *)(CONFIG_SYS_INIT_RAM_ADDR + CONFIG_SYS_GBL_DATA_OFFSET); + /* Clear initial global data */ + memset((void *)gd, 0, sizeof(gd_t)); + + /* + * get_clocks() needs to be called so that the serial driver + * works correctly + */ + get_clocks(); + + /* + * Do rudimental console / serial setup + */ + preloader_console_init(); + + /* + * Call board_init_r() (SPL framework version) to load and boot + * real U-Boot or OS + */ + board_init_r(NULL, 0); + /* Does not return!!! */ +} diff --git a/arch/powerpc/cpu/mpc5xxx/start.S b/arch/powerpc/cpu/mpc5xxx/start.S index 51cc4e2..ad5bc0a 100644 --- a/arch/powerpc/cpu/mpc5xxx/start.S +++ b/arch/powerpc/cpu/mpc5xxx/start.S @@ -50,6 +50,7 @@ #define MSR_KERNEL (MSR_FP|MSR_ME|MSR_RI) #endif
+#ifndef CONFIG_SPL_BUILD /* * Set up GOT: Global Offset Table * @@ -68,6 +69,7 @@ GOT_ENTRY(__bss_end__) GOT_ENTRY(__bss_start) END_GOT +#endif
/* * Version string @@ -84,6 +86,18 @@ version_string: . = EXC_OFF_SYS_RESET .globl _start _start: + +#if defined(CONFIG_SPL) && !defined(CONFIG_SPL_BUILD) + /* + * This is the entry of the real U-Boot from a board port + * that supports SPL booting on the MPC5200. We only need + * to call board_init_f() here. Everything else has already + * been done in the SPL u-boot version. + */ + GET_GOT /* initialize GOT access */ + bl board_init_f /* run 1st part of board init code (in Flash)*/ + /* NOTREACHED - board_init_f() does not return */ +#else mfmsr r5 /* save msr contents */
/* Move CSBoot and adjust instruction pointer */ @@ -152,7 +166,9 @@ lowboot_reentry: /* Be careful to keep code relocatable ! */ /*--------------------------------------------------------------*/
+#ifndef CONFIG_SPL_BUILD GET_GOT /* initialize GOT access */ +#endif
/* r3: IMMR */ bl cpu_init_f /* run low-level CPU init code (in Flash)*/ @@ -160,7 +176,9 @@ lowboot_reentry: bl board_init_f /* run 1st part of board init code (in Flash)*/
/* NOTREACHED - board_init_f() does not return */ +#endif
+#ifndef CONFIG_SPL_BUILD /* * Vector Table */ @@ -333,6 +351,7 @@ int_return: lwz r1,GPR1(r1) SYNC rfi +#endif /* CONFIG_SPL_BUILD */
/* * This code initialises the MPC5xxx processor core @@ -522,6 +541,7 @@ get_pvr: mfspr r3, PVR blr
+#ifndef CONFIG_SPL_BUILD /*------------------------------------------------------------------------------*/
/* @@ -759,3 +779,5 @@ trap_init:
mtlr r4 /* restore link register */ blr + +#endif /* CONFIG_SPL_BUILD */ diff --git a/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds new file mode 100644 index 0000000..cab9b92 --- /dev/null +++ b/arch/powerpc/cpu/mpc5xxx/u-boot-spl.lds @@ -0,0 +1,57 @@ +/* + * Copyright 2012 Stefan Roese sr@denx.de + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ + +MEMORY +{ + sdram : ORIGIN = CONFIG_SPL_BSS_START_ADDR, + LENGTH = CONFIG_SPL_BSS_MAX_SIZE + flash : ORIGIN = CONFIG_SPL_TEXT_BASE, + LENGTH = CONFIG_SYS_SPL_MAX_LEN +} + +OUTPUT_ARCH(powerpc) +ENTRY(_start) +SECTIONS +{ + .text : + { + __start = .; + arch/powerpc/cpu/mpc5xxx/start.o (.text) + *(.text*) + } > flash + + . = ALIGN(4); + .data : { *(SORT_BY_ALIGNMENT(.data*)) } > flash + + . = ALIGN(4); + .rodata : { *(SORT_BY_ALIGNMENT(.rodata*)) } > flash + + . = ALIGN(4); + .end_align : { *(.end_align*) } > flash + __spl_flash_end = .; + + .bss : + { + . = ALIGN(4); + __bss_start = .; + *(.bss*) + . = ALIGN(4); + __bss_end__ = .; + } > sdram +} diff --git a/arch/powerpc/include/asm/spl.h b/arch/powerpc/include/asm/spl.h new file mode 100644 index 0000000..f43bc23 --- /dev/null +++ b/arch/powerpc/include/asm/spl.h @@ -0,0 +1,31 @@ +/* + * (C) Copyright 2012 + * Texas Instruments, <www.ti.com> + * + * See file CREDITS for list of people who contributed to this + * project. + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation; either version 2 of + * the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place, Suite 330, Boston, + * MA 02111-1307 USA + */ +#ifndef _ASM_SPL_H_ +#define _ASM_SPL_H_ + +#define BOOT_DEVICE_NOR 1 + +/* Linker symbols */ +extern char __bss_start[], __bss_end__[]; + +#endif diff --git a/arch/powerpc/lib/Makefile b/arch/powerpc/lib/Makefile index 9bcbdde..cdb7a31 100644 --- a/arch/powerpc/lib/Makefile +++ b/arch/powerpc/lib/Makefile @@ -44,7 +44,9 @@ SOBJS-y += ticks.o SOBJS-y += reloc.o
COBJS-$(CONFIG_BAT_RW) += bat_rw.o +ifndef CONFIG_SPL_BUILD COBJS-y += board.o +endif COBJS-y += bootm.o COBJS-y += cache.o COBJS-y += extable.o @@ -53,6 +55,11 @@ COBJS-$(CONFIG_CMD_KGDB) += kgdb.o COBJS-$(CONFIG_SPL_FRAMEWORK) += spl.o COBJS-y += time.o
+# Don't include the MPC5xxx special memcpy into the +# SPL U-Boot image. memcpy is used in the SPL NOR +# flash driver. And we need the real, fast memcpy +# here. We have no problems with unaligned access. +ifndef CONFIG_SPL_BUILD # Workaround for local bus unaligned access problems # on MPC512x and MPC5200 ifdef CONFIG_MPC512X @@ -63,6 +70,7 @@ ifdef CONFIG_MPC5200 $(obj)ppcstring.o: AFLAGS += -Dmemcpy=__memcpy COBJS-y += memcpy_mpc5200.o endif +endif
COBJS += $(sort $(COBJS-y))
@@ -75,12 +83,14 @@ TARGETS += $(LIB) all: $(TARGETS)
$(LIB): $(obj).depend $(OBJS) +ifndef CONFIG_SPL_BUILD @if ! $(CROSS_COMPILE)readelf -S $(OBJS) | grep -q '.fixup.*PROGBITS';\ then \ echo "ERROR: Your compiler doesn't generate .fixup sections!";\ echo " Upgrade to a recent toolchain."; \ exit 1; \ fi; +endif $(call cmd_link_o_target, $(OBJS))
$(LIBGCC): $(obj).depend $(LGOBJS)