Since display5 is now supporting boot counting, we can just reset the board when bootm fails (i.e. it doesn't boot the fitImage kernel for any reason).
Signed-off-by: Lukasz Majewski lukma@denx.de ---
include/configs/display5.h | 10 +++++----- 1 file changed, 5 insertions(+), 5 deletions(-)
diff --git a/include/configs/display5.h b/include/configs/display5.h index 7689d54df9..9a11896c68 100644 --- a/include/configs/display5.h +++ b/include/configs/display5.h @@ -151,7 +151,7 @@ "sf probe;" \ "sf read ${loadaddr} swu-kernel;" \ "sf read ${loadaddr_swu_initramfs} swu-initramfs;" \ - "bootm ${loadaddr} ${loadaddr_swu_initramfs};" + "bootm ${loadaddr} ${loadaddr_swu_initramfs};reset;"
#define KERNEL_RECOVERY_PROCEDURE \ "echo '#######################';" \ @@ -159,7 +159,7 @@ "echo '#######################';" \ "sf probe;" \ "sf read ${loadaddr} lin-recovery;" \ - "bootm;" + "bootm;reset;"
#define SETUP_BOOTARGS \ "run set_rootfs_part;" \ @@ -315,7 +315,7 @@ "if run download_kernel; then " \ "setenv bootargs console=${console} " \ "root=/dev/mmcblk0p2 rootwait;" \ - "bootm ${loadaddr} - ${fdtaddr};" \ + "bootm ${loadaddr} - ${fdtaddr};reset;" \ "fi\0" \ "addip=setenv bootargs ${bootargs} " \ "ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:" \ @@ -332,7 +332,7 @@ "run addip;" \ "setenv bootargs ${bootargs} console=${console};" \ "setenv fdt_conf imx6q-${board}-${display}.dtb; " \ - "bootm ${loadaddr}#conf@${fdt_conf};" \ + "bootm ${loadaddr}#conf@${fdt_conf};reset;" \ "fi\0" \ "falcon_setup=" \ "if mmc dev ${mmcdev}; then " \ @@ -346,7 +346,7 @@ "boot_mmc=" \ "if mmc dev ${mmcdev}; then " \ SETUP_BOOTARGS \ - "bootm ${loadaddr}#conf@${fdt_conf};" \ + "bootm ${loadaddr}#conf@${fdt_conf};reset;" \ "fi\0" \ "set_kernel_part=" \ "if test ${BOOT_FROM} = ACTIVE; then " \