Hi, I have problems in writing an application for U-boot. I do not need U-boot functions (for now), I just have to write some registers and then fill some memory with a value. The HW will read that memory region for its usage.
I work on a ARM9 board whose RAM is mapped from 0x000000 to 0x04000000 (64MB). I have been privided U-boot 1.2.0 for this board.
First problem: I can compile U-boot with ELDK 4.1 but if I enter the "examples" directory and issue a make:
uboot-1.2.0/examples# make Makefile:64: /config.mk: No such file or directory Makefile:174: /rules.mk: No such file or directory make: *** No rule to make target `/rules.mk'. Stop.
So I am unable to compile the examples. What should I do? By the way, I noticed that: uboot-1.2.0/doc/README.standalone
[...] 4. The default load and start addresses of the applications are as follows: [...] ARM 0x0c100000 0x0c100000
I do not have RAM at that location! Shall I modify the Makefile for this?
Anyway, I wrote a small program that does what I described above:
int test02() { volatile int* r; int i;
*(volatile int*)(0xc0001200) = 0x00000000; *(volatile int*)(0xc0001220) = 0x0257031f; *(volatile int*)(0xc0001224) = 0x00162028;
r = (int*)0x00800000; for(i=0; i<0x100; i++) *r = 0x00000000;
return 0; }
I know, it's ugly and I could do everything with a bunch of u-boot's 'mw' commands, but this is only supposed to be a quick test. I have compiled it with:
arm-gcc -c test02.c && arm-objcopy -O binary test02.o test02.bin && cp test02.bin /tftpboot/
and then, on the target's u-boot prompt:
tftp 1000000 test02.bin
TFTP from server 192.168.1.77; our IP address is 192.168.1.10 Filename 'test02.bin'. Load address: 0x1000000 Loading: # done Bytes transferred = 252 (fc hex)
go 1000000
## Starting application at 0x01000000 ...
The first part of the program, the register writing, works, I get my hardware enabled. But the 'for' loop is not well 'relocated' and points to undefined code in random memory areas, and the CPU gets stuck.
Any advice? Thank you Alessio