On Saturday, September 05, 2015 at 03:47:12 PM, Simon Glass wrote:
Hi,
On 4 September 2015 at 00:31, Siva Durga Prasad Paladugu
siva.durga.paladugu@xilinx.com wrote:
Added USB XHCI driver support for zynqmp.
Signed-off-by: Siva Durga Prasad Paladugu sivadur@xilinx.com
Changes for v4:
Added sanity check for index as per
review comment
Changes for v3:
Decreased the phy reset delay to 10 micro secs
Defined base addresses in board config file as
per review comment.
Changes for v2:
Moved all from xhci-zynqmp.h to .c file as
per review comment
Removed ad-hoc function zynqmp_xhci_core_exit()
as per review comment
drivers/usb/host/Makefile | 1 + drivers/usb/host/xhci-zynqmp.c | 148 ++++++++++++++++++++++++++++++++++++ include/configs/xilinx_zynqmp_ep.h | 2 + 3 files changed, 151 insertions(+), 0 deletions(-) create mode 100644 drivers/usb/host/xhci-zynqmp.c
Can you convert this to use driver model? See xhci-exynos5.c for an example.
Right :)
Best regards, Marek Vasut