This patchset includes the pending patches we have in our tree. It fixes issues for mx23evk and mx23_olinuxino boards.
The DRAM control register change has been kept specific to mx23evk as it breaks mx23_olinuxino (as it than reads only 16MB)
Changes in v2: - Extend code comment to explicit say it needs to be there. - Use MUX pin name - Requested by Marek - Avoid wrong clock setting in MX23 - Add changes for allow use of the USB hub - Remove extra newline
Otavio Salvador (10): mxs: Rename CONFIG_SPL_MX28_PSWITCH_WAIT to CONFIG_SPL_MXS_PSWITCH_WAIT mx23: Document the tRAS lockout setting in memory initialization mx23evk: Adjust DRAM control register to use full 128MB of RAM led: Use STATUS_LED_ON and STATUS_LED_OFF when calling __led_set mxs: Fix iomux.h to not break build during assembly stage mx23_olinuxino: Add support for status LED usb: mxs: Disable USB Port 1 for i.MX23 mx23evk: Enable USB support mx23_olinuxino: Enable USB support mx23_olinuxino: Add ethernet support
arch/arm/cpu/arm926ejs/mxs/mxs_init.h | 2 +- arch/arm/cpu/arm926ejs/mxs/spl_mem_init.c | 1 + arch/arm/cpu/arm926ejs/mxs/spl_power_init.c | 2 +- arch/arm/include/asm/arch-mxs/iomux.h | 5 +++ board/freescale/mx23evk/spl_boot.c | 10 +++++ board/olimex/mx23_olinuxino/mx23_olinuxino.c | 13 ++++++ board/olimex/mx23_olinuxino/spl_boot.c | 8 ++++ common/cmd_led.c | 6 ++- drivers/usb/host/ehci-mxs.c | 12 ++++++ include/configs/mx23_olinuxino.h | 63 ++++++++++++++++++++++++++-- include/configs/mx23evk.h | 10 +++++ 11 files changed, 125 insertions(+), 7 deletions(-)