From: Sam Protsenko semen.protsenko@linaro.org
The description was borrowed from kernel. Definitions were added to defconfig files in a way that "make savedefconfig" generates exactly the same file as used defconfig.
Boards using 0 mA as CONFIG_USB_GADGET_VBUS_DRAW value were moved to use 2 mA (as minimal allowed by Kconfig).
Signed-off-by: Sam Protsenko semen.protsenko@linaro.org --- Changes for v2: - set minimal required value of VBUS_DRAW as 2 mA (as it's done in kernel)
drivers/usb/gadget/Kconfig | 21 +++++++++++++++++++++ include/configs/am335x_evm.h | 1 - include/configs/am43xx_evm.h | 5 ++++- include/configs/baltos.h | 1 - include/configs/bav335x.h | 1 - include/configs/bcm28155_ap.h | 1 - include/configs/cgtqmx6eval.h | 1 - include/configs/colibri_vf.h | 1 - include/configs/corvus.h | 1 - include/configs/dra7xx_evm.h | 1 - include/configs/exynos4-common.h | 1 - include/configs/gw_ventana.h | 1 - include/configs/kc1.h | 1 - include/configs/mx6sabre_common.h | 1 - include/configs/mx7dsabresd.h | 1 - include/configs/nitrogen6x.h | 1 - include/configs/odroid_xu3.h | 1 - include/configs/omap3_beagle.h | 1 - include/configs/omap3_logic.h | 1 - include/configs/omap5_uevm.h | 1 - include/configs/pengwyn.h | 1 - include/configs/s5p_goni.h | 1 - include/configs/siemens-am33x-common.h | 1 - include/configs/smartweb.h | 1 - include/configs/sniper.h | 1 - include/configs/socfpga_common.h | 1 - include/configs/sunxi-common.h | 1 - include/configs/taurus.h | 1 - include/configs/tbs2910.h | 1 - include/configs/tegra-common-usb-gadget.h | 1 - include/configs/warp.h | 1 - include/configs/xilinx_zynqmp.h | 1 - include/configs/zynq-common.h | 1 - 33 files changed, 25 insertions(+), 32 deletions(-)
diff --git a/drivers/usb/gadget/Kconfig b/drivers/usb/gadget/Kconfig index f4698f4..cfd8ce8 100644 --- a/drivers/usb/gadget/Kconfig +++ b/drivers/usb/gadget/Kconfig @@ -33,3 +33,24 @@ menuconfig USB_GADGET a USB peripheral device. Configure one hardware driver for your peripheral/device side bus controller, and a "gadget driver" for your peripheral protocol. + +if USB_GADGET + +config USB_GADGET_VBUS_DRAW + int "Maximum VBUS Power usage (2-500 mA)" + range 2 500 + default 2 + help + Some devices need to draw power from USB when they are + configured, perhaps to operate circuitry or to recharge + batteries. This is in addition to any local power supply, + such as an AC adapter or batteries. + + Enter the maximum power your device draws through USB, in + milliAmperes. The permitted range of values is 2 - 500 mA; + 0 mA would be legal, but can make some hosts misbehave. + + This value will be used except for system-specific gadget + drivers that have more specific information. + +endif # USB_GADGET diff --git a/include/configs/am335x_evm.h b/include/configs/am335x_evm.h index 29b693a..8d68d60 100644 --- a/include/configs/am335x_evm.h +++ b/include/configs/am335x_evm.h @@ -290,7 +290,6 @@ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/am43xx_evm.h b/include/configs/am43xx_evm.h index fd3f6a7..0dd9c7a7 100644 --- a/include/configs/am43xx_evm.h +++ b/include/configs/am43xx_evm.h @@ -122,6 +122,10 @@ #endif
/* USB GADGET */ +#if defined(CONFIG_SPL_BUILD) && !defined(CONFIG_SPL_USBETH_SUPPORT) +#undef CONFIG_USB_GADGET_VBUS_DRAW +#endif + #if !defined(CONFIG_SPL_BUILD) || \ (defined(CONFIG_SPL_BUILD) && defined(CONFIG_SPL_USBETH_SUPPORT)) #define CONFIG_USB_DWC3_PHY_OMAP @@ -130,7 +134,6 @@ #define CONFIG_USB_DWC3_GADGET
#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0403 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 diff --git a/include/configs/baltos.h b/include/configs/baltos.h index bfe3fa3..529cf1c 100644 --- a/include/configs/baltos.h +++ b/include/configs/baltos.h @@ -276,7 +276,6 @@ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_HOST diff --git a/include/configs/bav335x.h b/include/configs/bav335x.h index 6c860a6..82bf92a 100644 --- a/include/configs/bav335x.h +++ b/include/configs/bav335x.h @@ -441,7 +441,6 @@ DEFAULT_LINUX_BOOT_ENV \ #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/bcm28155_ap.h b/include/configs/bcm28155_ap.h index cf25bde..387895b 100644 --- a/include/configs/bcm28155_ap.h +++ b/include/configs/bcm28155_ap.h @@ -139,7 +139,6 @@ #define CONFIG_FASTBOOT_BUF_SIZE (CONFIG_SYS_SDRAM_SIZE - SZ_1M) #define CONFIG_FASTBOOT_BUF_ADDR CONFIG_SYS_SDRAM_BASE #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_BCM_UDC_OTG_PHY #define CONFIG_USB_GADGET_DOWNLOAD diff --git a/include/configs/cgtqmx6eval.h b/include/configs/cgtqmx6eval.h index 63e3b94..3f3b69d 100644 --- a/include/configs/cgtqmx6eval.h +++ b/include/configs/cgtqmx6eval.h @@ -93,7 +93,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/colibri_vf.h b/include/configs/colibri_vf.h index 7f57a54..63dbe12 100644 --- a/include/configs/colibri_vf.h +++ b/include/configs/colibri_vf.h @@ -235,7 +235,6 @@ /* USB Client Support */ #define CONFIG_CI_UDC #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_TRDX_VID 0x1B67 #define CONFIG_TRDX_PID_COLIBRI_VF50 0x0016 #define CONFIG_TRDX_PID_COLIBRI_VF61 0x0017 diff --git a/include/configs/corvus.h b/include/configs/corvus.h index fcf2bd6..b8c441e 100644 --- a/include/configs/corvus.h +++ b/include/configs/corvus.h @@ -125,7 +125,6 @@ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000
diff --git a/include/configs/dra7xx_evm.h b/include/configs/dra7xx_evm.h index 7734e8d..e9facae 100644 --- a/include/configs/dra7xx_evm.h +++ b/include/configs/dra7xx_evm.h @@ -233,7 +233,6 @@ #define CONFIG_USB_DWC3_GADGET
#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0451 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 diff --git a/include/configs/exynos4-common.h b/include/configs/exynos4-common.h index 008d24c..c8e5397 100644 --- a/include/configs/exynos4-common.h +++ b/include/configs/exynos4-common.h @@ -53,7 +53,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DWC2_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE diff --git a/include/configs/gw_ventana.h b/include/configs/gw_ventana.h index 793b3fb..62f3468 100644 --- a/include/configs/gw_ventana.h +++ b/include/configs/gw_ventana.h @@ -196,7 +196,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2
/* Netchip IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 diff --git a/include/configs/kc1.h b/include/configs/kc1.h index ee7d9ce..d8aa182 100644 --- a/include/configs/kc1.h +++ b/include/configs/kc1.h @@ -185,7 +185,6 @@ #define CONFIG_USB_MUSB_OMAP2PLUS
#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0
/* * Download diff --git a/include/configs/mx6sabre_common.h b/include/configs/mx6sabre_common.h index ceea74e..299f11b 100644 --- a/include/configs/mx6sabre_common.h +++ b/include/configs/mx6sabre_common.h @@ -241,7 +241,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/mx7dsabresd.h b/include/configs/mx7dsabresd.h index 5d897c2..506ac32 100644 --- a/include/configs/mx7dsabresd.h +++ b/include/configs/mx7dsabresd.h @@ -256,7 +256,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index 3604e44..a50829e 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -333,7 +333,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2
/* Netchip IDs */ #define CONFIG_G_DNL_VENDOR_NUM 0x0525 diff --git a/include/configs/odroid_xu3.h b/include/configs/odroid_xu3.h index 01d08dc..e4986b0 100644 --- a/include/configs/odroid_xu3.h +++ b/include/configs/odroid_xu3.h @@ -54,7 +54,6 @@
/* USB gadget */ #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2
/* Downloader */ #define CONFIG_G_DNL_VENDOR_NUM 0x04E8 diff --git a/include/configs/omap3_beagle.h b/include/configs/omap3_beagle.h index 2112d9f..17d8a86 100644 --- a/include/configs/omap3_beagle.h +++ b/include/configs/omap3_beagle.h @@ -66,7 +66,6 @@ #define CONFIG_TWL4030_USB 1 #define CONFIG_USB_ETHER #define CONFIG_USB_ETHER_RNDIS -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0451 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 diff --git a/include/configs/omap3_logic.h b/include/configs/omap3_logic.h index 304e1ce..7e802e9 100644 --- a/include/configs/omap3_logic.h +++ b/include/configs/omap3_logic.h @@ -85,7 +85,6 @@ #define CONFIG_USB_GADGET_DUALSPEED #define CONFIG_USB_ETHER #define CONFIG_USB_ETHER_RNDIS -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0451 #define CONFIG_G_DNL_PRODUCT_NUM 0xd022 diff --git a/include/configs/omap5_uevm.h b/include/configs/omap5_uevm.h index a5cfa0c..09beb74 100644 --- a/include/configs/omap5_uevm.h +++ b/include/configs/omap5_uevm.h @@ -106,7 +106,6 @@ #define CONFIG_USB_DWC3_GADGET
#define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_G_DNL_MANUFACTURER "Texas Instruments" #define CONFIG_G_DNL_VENDOR_NUM 0x0403 #define CONFIG_G_DNL_PRODUCT_NUM 0xBD00 diff --git a/include/configs/pengwyn.h b/include/configs/pengwyn.h index 1a670cb..ec3fcba 100644 --- a/include/configs/pengwyn.h +++ b/include/configs/pengwyn.h @@ -200,7 +200,6 @@ #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST #define CONFIG_AM335X_USB0 #define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL diff --git a/include/configs/s5p_goni.h b/include/configs/s5p_goni.h index 07a5134..919c60e 100644 --- a/include/configs/s5p_goni.h +++ b/include/configs/s5p_goni.h @@ -273,7 +273,6 @@ #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DWC2_OTG_PHY #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE
diff --git a/include/configs/siemens-am33x-common.h b/include/configs/siemens-am33x-common.h index df2a514..df4e734 100644 --- a/include/configs/siemens-am33x-common.h +++ b/include/configs/siemens-am33x-common.h @@ -225,7 +225,6 @@ #define CONFIG_USB_MUSB_PIO_ONLY #define CONFIG_USB_MUSB_DISABLE_BULK_COMBINE_SPLIT #undef CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USB_MUSB_HOST
#define CONFIG_AM335X_USB0 diff --git a/include/configs/smartweb.h b/include/configs/smartweb.h index db820ba..0586aec 100644 --- a/include/configs/smartweb.h +++ b/include/configs/smartweb.h @@ -176,7 +176,6 @@ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE SZ_1M #define DFU_MANIFEST_POLL_TIMEOUT 25000
diff --git a/include/configs/sniper.h b/include/configs/sniper.h index 18a379d..12090a3 100644 --- a/include/configs/sniper.h +++ b/include/configs/sniper.h @@ -202,7 +202,6 @@ #define CONFIG_TWL4030_USB
#define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0
/* * Download diff --git a/include/configs/socfpga_common.h b/include/configs/socfpga_common.h index 3e50892..bdb06e7 100644 --- a/include/configs/socfpga_common.h +++ b/include/configs/socfpga_common.h @@ -252,7 +252,6 @@ unsigned int cm_get_qspi_controller_clk_hz(void); #if defined(CONFIG_CMD_DFU) || defined(CONFIG_CMD_USB_MASS_STORAGE) #define CONFIG_USB_GADGET_DWC2_OTG #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2
/* USB Composite download gadget - g_dnl */ #define CONFIG_USB_GADGET_DOWNLOAD diff --git a/include/configs/sunxi-common.h b/include/configs/sunxi-common.h index 8f11eb9..b5d05cd 100644 --- a/include/configs/sunxi-common.h +++ b/include/configs/sunxi-common.h @@ -343,7 +343,6 @@ extern int soft_i2c_gpio_scl;
#ifdef CONFIG_USB_MUSB_GADGET #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0
#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_FUNCTION_DFU diff --git a/include/configs/taurus.h b/include/configs/taurus.h index 5b190f6..0b04b3a 100644 --- a/include/configs/taurus.h +++ b/include/configs/taurus.h @@ -140,7 +140,6 @@ #define CONFIG_USB_FUNCTION_DFU #define CONFIG_DFU_NAND #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_SYS_DFU_DATA_BUF_SIZE (SZ_1M) #define DFU_MANIFEST_POLL_TIMEOUT 25000
diff --git a/include/configs/tbs2910.h b/include/configs/tbs2910.h index 1b5046a..715994c 100644 --- a/include/configs/tbs2910.h +++ b/include/configs/tbs2910.h @@ -132,7 +132,6 @@ #define CONFIG_USBD_HS #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 0 #define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/tegra-common-usb-gadget.h b/include/configs/tegra-common-usb-gadget.h index c3a0151..ec034a1 100644 --- a/include/configs/tegra-common-usb-gadget.h +++ b/include/configs/tegra-common-usb-gadget.h @@ -10,7 +10,6 @@
#ifndef CONFIG_SPL_BUILD /* USB gadget mode support*/ -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_CI_UDC #define CONFIG_CI_UDC_HAS_HOSTPC #define CONFIG_USB_GADGET_DUALSPEED diff --git a/include/configs/warp.h b/include/configs/warp.h index cb93629..80c4e38 100644 --- a/include/configs/warp.h +++ b/include/configs/warp.h @@ -81,7 +81,6 @@ #define CONFIG_CMD_USB_MASS_STORAGE #define CONFIG_USB_FUNCTION_MASS_STORAGE #define CONFIG_USB_GADGET_DOWNLOAD -#define CONFIG_USB_GADGET_VBUS_DRAW 2
#define CONFIG_G_DNL_VENDOR_NUM 0x0525 #define CONFIG_G_DNL_PRODUCT_NUM 0xa4a5 diff --git a/include/configs/xilinx_zynqmp.h b/include/configs/xilinx_zynqmp.h index 8cea610..3a96483 100644 --- a/include/configs/xilinx_zynqmp.h +++ b/include/configs/xilinx_zynqmp.h @@ -130,7 +130,6 @@
#define CONFIG_USB_GADGET_DOWNLOAD #define CONFIG_USB_GADGET_DUALSPEED -#define CONFIG_USB_GADGET_VBUS_DRAW 2 #define CONFIG_USBDOWNLOAD_GADGET #define CONFIG_SYS_DFU_DATA_BUF_SIZE 0x1800000 #define DFU_DEFAULT_POLL_TIMEOUT 300 diff --git a/include/configs/zynq-common.h b/include/configs/zynq-common.h index d8e3fa4..941372d 100644 --- a/include/configs/zynq-common.h +++ b/include/configs/zynq-common.h @@ -107,7 +107,6 @@ # define DFU_DEFAULT_POLL_TIMEOUT 300 # define CONFIG_USB_FUNCTION_DFU # define CONFIG_DFU_RAM -# define CONFIG_USB_GADGET_VBUS_DRAW 2 # define CONFIG_G_DNL_VENDOR_NUM 0x03FD # define CONFIG_G_DNL_PRODUCT_NUM 0x0300 # define CONFIG_G_DNL_MANUFACTURER "Xilinx"