The DEBUG code in initdram() is quite old and was never really useful, so just drop it altogether. Common Blackfin debug code does a better job.
Signed-off-by: Mike Frysinger vapier@gentoo.org --- board/bf533-ezkit/bf533-ezkit.c | 14 +------------- board/bf533-stamp/bf533-stamp.c | 11 +---------- board/bf537-stamp/bf537-stamp.c | 14 +------------- board/bf561-ezkit/bf561-ezkit.c | 14 +------------- 4 files changed, 4 insertions(+), 49 deletions(-)
diff --git a/board/bf533-ezkit/bf533-ezkit.c b/board/bf533-ezkit/bf533-ezkit.c index 6973082..d5f0b7c 100644 --- a/board/bf533-ezkit/bf533-ezkit.c +++ b/board/bf533-ezkit/bf533-ezkit.c @@ -40,21 +40,9 @@ int checkboard(void)
phys_size_t initdram(int board_type) { -#ifdef DEBUG - int brate; - char *tmp = getenv("baudrate"); - brate = simple_strtoul(tmp, NULL, 16); - printf("Serial Port initialized with Baud rate = %x\n", brate); - printf("SDRAM attributes:\n"); - printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" - "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", - 3, 3, 6, 2, 3); - printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE); - printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20); -#endif gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; - return CONFIG_SYS_MAX_RAM_SIZE; + return gd->bd->bi_memsize; }
/* miscellaneous platform dependent initialisations */ diff --git a/board/bf533-stamp/bf533-stamp.c b/board/bf533-stamp/bf533-stamp.c index 0c6324b..1a073a6 100644 --- a/board/bf533-stamp/bf533-stamp.c +++ b/board/bf533-stamp/bf533-stamp.c @@ -49,18 +49,9 @@ int checkboard(void)
phys_size_t initdram(int board_type) { -#ifdef DEBUG - printf("SDRAM attributes:\n"); - printf - (" tRCD:%d Cycles; tRP:%d Cycles; tRAS:%d Cycles; tWR:%d Cycles; " - "CAS Latency:%d cycles\n", (SDRAM_tRCD >> 15), (SDRAM_tRP >> 11), - (SDRAM_tRAS >> 6), (SDRAM_tWR >> 19), (SDRAM_CL >> 2)); - printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE); - printf("Bank size = %d MB\n", 128); -#endif gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; - return (gd->bd->bi_memsize); + return gd->bd->bi_memsize; }
void swap_to(int device_id) diff --git a/board/bf537-stamp/bf537-stamp.c b/board/bf537-stamp/bf537-stamp.c index 7303f1b..63992f6 100644 --- a/board/bf537-stamp/bf537-stamp.c +++ b/board/bf537-stamp/bf537-stamp.c @@ -100,21 +100,9 @@ void cf_outsw(unsigned short *addr, unsigned short *sect_buf, int words)
phys_size_t initdram(int board_type) { -#ifdef DEBUG - int brate; - char *tmp = getenv("baudrate"); - brate = simple_strtoul(tmp, NULL, 16); - printf("Serial Port initialized with Baud rate = %x\n", brate); - printf("SDRAM attributes:\n"); - printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" - "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", - 3, 3, 6, 2, 3); - printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE); - printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20); -#endif gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; - return CONFIG_SYS_MAX_RAM_SIZE; + return gd->bd->bi_memsize; }
#if defined(CONFIG_MISC_INIT_R) diff --git a/board/bf561-ezkit/bf561-ezkit.c b/board/bf561-ezkit/bf561-ezkit.c index 7f8598c..5aede17 100644 --- a/board/bf561-ezkit/bf561-ezkit.c +++ b/board/bf561-ezkit/bf561-ezkit.c @@ -39,19 +39,7 @@ int checkboard(void)
phys_size_t initdram(int board_type) { -#ifdef DEBUG - int brate; - char *tmp = getenv("baudrate"); - brate = simple_strtoul(tmp, NULL, 16); - printf("Serial Port initialized with Baud rate = %x\n", brate); - printf("SDRAM attributes:\n"); - printf("tRCD %d SCLK Cycles,tRP %d SCLK Cycles,tRAS %d SCLK Cycles" - "tWR %d SCLK Cycles,CAS Latency %d SCLK cycles \n", - 3, 3, 6, 2, 3); - printf("SDRAM Begin: 0x%x\n", CONFIG_SYS_SDRAM_BASE); - printf("Bank size = %d MB\n", CONFIG_SYS_MAX_RAM_SIZE >> 20); -#endif gd->bd->bi_memstart = CONFIG_SYS_SDRAM_BASE; gd->bd->bi_memsize = CONFIG_SYS_MAX_RAM_SIZE; - return CONFIG_SYS_MAX_RAM_SIZE; + return gd->bd->bi_memsize; }