Due to introducing the new UTMI PLL clock handle functions, use these function to reduce the duplicated code.
Signed-off-by: Wenyou Yang wenyou.yang@atmel.com Tested-by: Heiko Schocher hs@denx.de ---
Changes in v3: None Changes in v2: - remain asm/io.h include.
drivers/usb/host/ehci-atmel.c | 38 ++++---------------------------------- drivers/usb/host/ohci-at91.c | 20 +++++++------------- 2 files changed, 11 insertions(+), 47 deletions(-)
diff --git a/drivers/usb/host/ehci-atmel.c b/drivers/usb/host/ehci-atmel.c index a33fb49..1d7d280 100644 --- a/drivers/usb/host/ehci-atmel.c +++ b/drivers/usb/host/ehci-atmel.c @@ -7,37 +7,18 @@ */
#include <common.h> -#include <watchdog.h> #include <usb.h> #include <asm/io.h> -#include <asm/arch/hardware.h> -#include <asm/arch/at91_pmc.h> #include <asm/arch/clk.h>
#include "ehci.h"
-/* Enable UTMI PLL time out 500us - * 10 times as datasheet specified - */ -#define EN_UPLL_TIMEOUT 500UL - int ehci_hcd_init(int index, enum usb_init_type init, struct ehci_hccr **hccr, struct ehci_hcor **hcor) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - ulong start_time, tmp_time; - - start_time = get_timer(0); /* Enable UTMI PLL */ - writel(AT91_PMC_UPLLEN | AT91_PMC_BIASEN, &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) { - WATCHDOG_RESET(); - tmp_time = get_timer(0); - if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) { - printf("ERROR: failed to enable UPLL\n"); - return -1; - } - } + if (at91_upll_clk_enable()) + return -1;
/* Enable USB Host clock */ at91_periph_clk_enable(ATMEL_ID_UHPHS); @@ -51,23 +32,12 @@ int ehci_hcd_init(int index, enum usb_init_type init,
int ehci_hcd_stop(int index) { - at91_pmc_t *pmc = (at91_pmc_t *)ATMEL_BASE_PMC; - ulong start_time, tmp_time; - /* Disable USB Host Clock */ at91_periph_clk_disable(ATMEL_ID_UHPHS);
- start_time = get_timer(0); /* Disable UTMI PLL */ - writel(readl(&pmc->uckr) & ~AT91_PMC_UPLLEN, &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) { - WATCHDOG_RESET(); - tmp_time = get_timer(0); - if ((tmp_time - start_time) > EN_UPLL_TIMEOUT) { - printf("ERROR: failed to stop UPLL\n"); - return -1; - } - } + if (at91_upll_clk_disable()) + return -1;
return 0; } diff --git a/drivers/usb/host/ohci-at91.c b/drivers/usb/host/ohci-at91.c index da85111..6ae6959 100644 --- a/drivers/usb/host/ohci-at91.c +++ b/drivers/usb/host/ohci-at91.c @@ -24,17 +24,13 @@ int usb_cpu_init(void) while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != AT91_PMC_LOCKB) ; #ifdef CONFIG_AT91SAM9N12 - writel(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2, &pmc->usb); + at91_usb_clk_init(AT91_PMC_USBS_USB_PLLB | AT91_PMC_USB_DIV_2); #endif #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) - /* Enable UPLL */ - writel(readl(&pmc->uckr) | AT91_PMC_UPLLEN | AT91_PMC_BIASEN, - &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) != AT91_PMC_LOCKU) - ; + if (at91_upll_clk_enable()) + return -1;
- /* Select PLLA as input clock of OHCI */ - writel(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10, &pmc->usb); + at91_usb_clk_init(AT91_PMC_USBS_USB_UPLL | AT91_PMC_USBDIV_10); #endif
at91_periph_clk_enable(ATMEL_ID_UHP); @@ -60,17 +56,15 @@ int usb_cpu_stop(void)
#ifdef CONFIG_USB_ATMEL_CLK_SEL_PLLB #ifdef CONFIG_AT91SAM9N12 - writel(0, &pmc->usb); + at91_usb_clk_init(0); #endif /* Disable PLLB */ writel(0, &pmc->pllbr); while ((readl(&pmc->sr) & AT91_PMC_LOCKB) != 0) ; #elif defined(CONFIG_USB_ATMEL_CLK_SEL_UPLL) - /* Disable UPLL */ - writel(readl(&pmc->uckr) & (~AT91_PMC_UPLLEN), &pmc->uckr); - while ((readl(&pmc->sr) & AT91_PMC_LOCKU) == AT91_PMC_LOCKU) - ; + if (at91_upll_clk_disable()) + return -1; #endif
return 0;