Hi Guillaume,
On 09/11/2014 02:59 AM, Guillaume GARDET wrote:
Sabrelite board has two solts: 0 is SD3 (bottom) slot and 1 is uSD4 (top) slot. This patch makes use of both slots instead of only one.
Signed-off-by: Guillaume GARDET guillaume.gardet@free.fr Cc: Stefano Babic sbabic@denx.de Cc: Eric Nelson eric.nelson@boundarydevices.com
include/configs/nitrogen6x.h | 25 ++++++++++++++----------- 1 file changed, 14 insertions(+), 11 deletions(-)
diff --git a/include/configs/nitrogen6x.h b/include/configs/nitrogen6x.h index d4b0ac9..2a1eb3b 100644 --- a/include/configs/nitrogen6x.h +++ b/include/configs/nitrogen6x.h @@ -186,7 +186,7 @@ "fdt_addr=0x18000000\0" \ "boot_fdt=try\0" \ "ip_dyn=yes\0" \
- "mmcdev=0\0" \
- "mmcdevs=0 1\0" \ "mmcpart=1\0" \ "mmcroot=/dev/mmcblk0p2 rootwait rw\0" \ "mmcargs=setenv bootargs console=${console},${baudrate} " \
@@ -238,16 +238,19 @@ "fi;\0"
#define CONFIG_BOOTCOMMAND \
"mmc dev ${mmcdev}; if mmc rescan; then " \"if run loadbootscript; then " \"run bootscript; " \"else " \"if run loaduimage; then " \"run mmcboot; " \"else run netboot; " \"fi; " \"fi; " \"else run netboot; fi"
If you add one more loop here, you can get SATA support and end up with something very close to the Nitrogen6x configuration!
- "for mmcdev in ${mmcdevs}; do " \
"mmc dev ${mmcdev}; " \"if mmc rescan; then " \"if run loadbootscript; then " \"run bootscript; " \"else " \"if run loaduimage; then " \"run mmcboot; " \"fi; " \"fi; " \"fi; " \- "done; " \
- "run netboot; "
#else #define CONFIG_EXTRA_ENV_SETTINGS \ "console=ttymxc1\0" \
Reviewed-by: Eric Nelson eric.nelson@boundarydevices.com Acked-by: Eric Nelson eric.nelson@boundarydevices.com