7 Mar
2012
7 Mar
'12
10:33 a.m.
On 23/02/2012 09:50, Dirk Behme wrote:
The flash header supports different flash offsets for different boot devices. E.g. parallel NOR or OneNAND use a different offset than FLASH_OFFSET_STANDARD (== 0x400).
The flash offset is correctly read from the configuration in parse_cfg_cmd(). But is then overwritten wrongly in set_imx_hdr_v1/2().
Fix this by removing this overwriting. Use the flash offset correctly read from the configuration, instead.
If there is no flash_offset read from the configuration file, i.e. the BOOT_FROM tag is missing, exit with an error message.
Signed-off-by: Dirk Behme dirk.behme@de.bosch.com CC: Jason Liu liu.h.jason@gmail.com CC: Stefano Babic sbabic@denx.de
Applied to u-boot-imx, thanks.
Best regards, Stefano Babic
--
=====================================================================
DENX Software Engineering GmbH, MD: Wolfgang Denk & Detlev Zundel
HRB 165235 Munich, Office: Kirchenstr.5, D-82194 Groebenzell, Germany
Phone: +49-8142-66989-0 Fax: +49-8142-66989-80 Email: office@denx.de
=====================================================================