The final DMA descriptor doesn't properly write CTRL0 register during the DMA transfer. Properly write CTRL0 to make sure the transmission is complete.
Signed-off-by: Marek Vasut marex@denx.de Cc: Fabio Estevam festevam@gmail.com Cc: Otavio Salvador otavio@ossystems.com.br Cc: Stefano Babic sbabic@denx.de
!!
Please discard
drivers/spi/mxs_spi.c | 20 +++++++++++++++++--- 1 file changed, 17 insertions(+), 3 deletions(-)
diff --git a/drivers/spi/mxs_spi.c b/drivers/spi/mxs_spi.c index 168dbe4..5ee0ea1 100644 --- a/drivers/spi/mxs_spi.c +++ b/drivers/spi/mxs_spi.c @@ -226,6 +226,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, uint32_t cache_data_count; int dmach; int tl;
int ret = 0;
ALLOC_CACHE_ALIGN_BUFFER(struct mxs_dma_desc, desc, desc_count);
@@ -302,12 +303,25 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, MXS_DMA_DESC_IRQ | MXS_DMA_DESC_DEC_SEM; if (flags & SPI_XFER_END) { ctrl0 &= ~SSP_CTRL0_LOCK_CS;
dp->cmd.pio_words[0] = ctrl0 | SSP_CTRL0_IGNORE_CRC;
ctrl0 |= SSP_CTRL0_IGNORE_CRC;dp->cmd.pio_words[0] = ctrl0;} mxs_dma_desc_append(dmach, dp);
if (mxs_dma_go(dmach))
return -EINVAL;
ret = -EINVAL;/*
* The DMA contains further hidden gems, like the last transfer* not writing the CTRL0 PIO word properly. Write the PIO word* directly here for proper operation. This issue was detected* on S25FL064P chip by issuing:** sf probe 2:0 ; sf read 0x42000000 0 0x800000 ; sf probe 2:0** This resulted in garbled subsequent probe.*/writel(ctrl0, &ssp_regs->hw_ssp_ctrl0_reg);
/* The data arrived into DRAM, invalidate cache over them */ if (!write) {
@@ -315,7 +329,7 @@ static int mxs_spi_xfer_dma(struct mxs_spi_slave *slave, (uint32_t)(data + cache_data_count)); }
- return 0;
- return ret;
}
int spi_xfer(struct spi_slave *slave, unsigned int bitlen,
Best regards, Marek Vasut