Microsoft specifies a SPCR (Serial Port Console Redirection Table) [1]. Let's provide it in U-Boot.
[1]: https://docs.microsoft.com/en-us/windows-hardware/drivers/serports/serial-po...
Signed-off-by: Andy Shevchenko andriy.shevchenko@linux.intel.com --- arch/x86/include/asm/acpi_table.h | 2 + arch/x86/lib/acpi_table.c | 118 ++++++++++++++++++++++++++++++ 2 files changed, 120 insertions(+)
diff --git a/arch/x86/include/asm/acpi_table.h b/arch/x86/include/asm/acpi_table.h index 51cc806673..e3b65cff66 100644 --- a/arch/x86/include/asm/acpi_table.h +++ b/arch/x86/include/asm/acpi_table.h @@ -327,6 +327,8 @@ struct acpi_global_nvs; #define ACPI_DBG2_USB_XHCI 0x0000 #define ACPI_DBG2_USB_EHCI 0x0001
+#define ACPI_DBG2_UNKNOWN 0x00FF + /* SPCR (Serial Port Console Redirection table) */ struct __packed acpi_spcr { struct acpi_table_header header; diff --git a/arch/x86/lib/acpi_table.c b/arch/x86/lib/acpi_table.c index c6b2026613..5a37a22c8c 100644 --- a/arch/x86/lib/acpi_table.c +++ b/arch/x86/lib/acpi_table.c @@ -12,6 +12,7 @@ #include <cpu.h> #include <dm.h> #include <dm/uclass-internal.h> +#include <serial.h> #include <version.h> #include <asm/acpi/global_nvs.h> #include <asm/acpi_table.h> @@ -338,6 +339,115 @@ static void acpi_create_mcfg(struct acpi_mcfg *mcfg) header->checksum = table_compute_checksum((void *)mcfg, header->length); }
+static void acpi_create_spcr(struct acpi_spcr *spcr) +{ + struct acpi_table_header *header = &(spcr->header); + struct serial_device_info serial_info = {0}; + ulong serial_address, serial_offset; + uint serial_config; + uint serial_width; + int access_size; + int space_id; + int ret; + + /* Fill out header fields */ + acpi_fill_header(header, "SPCR"); + header->length = sizeof(struct acpi_spcr); + header->revision = 2; + + ret = serial_getinfo(&serial_info); + if (ret) + serial_info.type = SERIAL_CHIP_UNKNOWN; + + /* Encode chip type */ + switch (serial_info.type) { + case SERIAL_CHIP_16550_COMPATIBLE: + spcr->interface_type = ACPI_DBG2_16550_COMPATIBLE; + break; + case SERIAL_CHIP_UNKNOWN: + default: + spcr->interface_type = ACPI_DBG2_UNKNOWN; + break; + } + + /* Encode address space */ + switch (serial_info.addr_space) { + case SERIAL_ADDRESS_SPACE_MEMORY: + space_id = ACPI_ADDRESS_SPACE_MEMORY; + break; + case SERIAL_ADDRESS_SPACE_IO: + default: + space_id = ACPI_ADDRESS_SPACE_IO; + break; + } + + serial_width = serial_info.reg_width * 8; + serial_offset = serial_info.reg_offset << serial_info.reg_shift; + serial_address = serial_info.addr + serial_offset; + + /* Encode register access size */ + switch (serial_info.reg_shift) { + case 0: + access_size = ACPI_ACCESS_SIZE_BYTE_ACCESS; + break; + case 1: + access_size = ACPI_ACCESS_SIZE_WORD_ACCESS; + break; + case 2: + access_size = ACPI_ACCESS_SIZE_DWORD_ACCESS; + break; + case 3: + access_size = ACPI_ACCESS_SIZE_QWORD_ACCESS; + break; + default: + access_size = ACPI_ACCESS_SIZE_UNDEFINED; + break; + } + + debug("UART type %u @ %lx\n", spcr->interface_type, serial_address); + + /* Fill GAS */ + spcr->serial_port.space_id = space_id; + spcr->serial_port.bit_width = serial_width; + spcr->serial_port.bit_offset = 0; + spcr->serial_port.access_size = access_size; + spcr->serial_port.addrl = lower_32_bits(serial_address); + spcr->serial_port.addrh = upper_32_bits(serial_address); + + /* Encode baud rate */ + switch (serial_info.baudrate) { + case 9600: + spcr->baud_rate = 3; + break; + case 19200: + spcr->baud_rate = 4; + break; + case 57600: + spcr->baud_rate = 6; + break; + case 115200: + spcr->baud_rate = 7; + break; + default: + spcr->baud_rate = 0; + break; + } + + ret = serial_getconfig(&serial_config); + if (ret) + serial_config = SERIAL_DEFAULT_CONFIG; + + spcr->parity = SERIAL_GET_PARITY(serial_config); + spcr->stop_bits = SERIAL_GET_STOP(serial_config); + + /* No PCI devices for now */ + spcr->pci_device_id = 0xffff; + spcr->pci_vendor_id = 0xffff; + + /* Fix checksum */ + header->checksum = table_compute_checksum((void *)spcr, header->length); +} + /* * QEMU's version of write_acpi_tables is defined in drivers/misc/qfw.c */ @@ -352,6 +462,7 @@ ulong write_acpi_tables(ulong start) struct acpi_fadt *fadt; struct acpi_mcfg *mcfg; struct acpi_madt *madt; + struct acpi_spcr *spcr; int i;
current = start; @@ -440,6 +551,13 @@ ulong write_acpi_tables(ulong start) acpi_add_table(rsdp, mcfg); current = ALIGN(current, 16);
+ debug("ACPI: * SPCR\n"); + spcr = (struct acpi_spcr *)current; + acpi_create_spcr(spcr); + current += spcr->header.length; + acpi_add_table(rsdp, spcr); + current = ALIGN(current, 16); + debug("current = %x\n", current);
acpi_rsdp_addr = (unsigned long)rsdp;