OF_CONTROL, DM_SPI and other driver model migration deadlines are expired for this board.
Drop it.
Cc: Lars Poeschel poeschel@lemonage.de Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- Changes for v2: - new patch
arch/arm/Kconfig | 1 - arch/arm/mach-omap2/am33xx/Kconfig | 7 - board/phytec/pcm051/Kconfig | 15 -- board/phytec/pcm051/MAINTAINERS | 7 - board/phytec/pcm051/Makefile | 11 -- board/phytec/pcm051/board.c | 258 ----------------------------- board/phytec/pcm051/board.h | 24 --- board/phytec/pcm051/mux.c | 127 -------------- configs/pcm051_rev1_defconfig | 60 ------- configs/pcm051_rev3_defconfig | 60 ------- include/configs/pcm051.h | 128 -------------- 11 files changed, 698 deletions(-) delete mode 100644 board/phytec/pcm051/Kconfig delete mode 100644 board/phytec/pcm051/MAINTAINERS delete mode 100644 board/phytec/pcm051/Makefile delete mode 100644 board/phytec/pcm051/board.c delete mode 100644 board/phytec/pcm051/board.h delete mode 100644 board/phytec/pcm051/mux.c delete mode 100644 configs/pcm051_rev1_defconfig delete mode 100644 configs/pcm051_rev3_defconfig delete mode 100644 include/configs/pcm051.h
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 9d3f00120f..7f328e6afe 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1904,7 +1904,6 @@ source "board/hisilicon/hikey/Kconfig" source "board/hisilicon/hikey960/Kconfig" source "board/hisilicon/poplar/Kconfig" source "board/isee/igep003x/Kconfig" -source "board/phytec/pcm051/Kconfig" source "board/silica/pengwyn/Kconfig" source "board/spear/spear300/Kconfig" source "board/spear/spear310/Kconfig" diff --git a/arch/arm/mach-omap2/am33xx/Kconfig b/arch/arm/mach-omap2/am33xx/Kconfig index bb8959e7a7..60e5ec5684 100644 --- a/arch/arm/mach-omap2/am33xx/Kconfig +++ b/arch/arm/mach-omap2/am33xx/Kconfig @@ -146,13 +146,6 @@ config TARGET_ETAMIN select DM_SERIAL imply CMD_DM
-config TARGET_PCM051 - bool "Support pcm051" - select DM - select DM_GPIO - select DM_SERIAL - imply CMD_DM - config TARGET_PENGWYN bool "Support pengwyn" select DM diff --git a/board/phytec/pcm051/Kconfig b/board/phytec/pcm051/Kconfig deleted file mode 100644 index 2cc0d8872d..0000000000 --- a/board/phytec/pcm051/Kconfig +++ /dev/null @@ -1,15 +0,0 @@ -if TARGET_PCM051 - -config SYS_BOARD - default "pcm051" - -config SYS_VENDOR - default "phytec" - -config SYS_SOC - default "am33xx" - -config SYS_CONFIG_NAME - default "pcm051" - -endif diff --git a/board/phytec/pcm051/MAINTAINERS b/board/phytec/pcm051/MAINTAINERS deleted file mode 100644 index 18ea636a83..0000000000 --- a/board/phytec/pcm051/MAINTAINERS +++ /dev/null @@ -1,7 +0,0 @@ -PCM051 BOARD -M: Lars Poeschel poeschel@lemonage.de -S: Maintained -F: board/phytec/pcm051/ -F: include/configs/pcm051.h -F: configs/pcm051_rev1_defconfig -F: configs/pcm051_rev3_defconfig diff --git a/board/phytec/pcm051/Makefile b/board/phytec/pcm051/Makefile deleted file mode 100644 index ff6f8b4221..0000000000 --- a/board/phytec/pcm051/Makefile +++ /dev/null @@ -1,11 +0,0 @@ -# SPDX-License-Identifier: GPL-2.0+ -# -# Makefile -# -# Copyright (C) 2011 Texas Instruments Incorporated - http://www.ti.com/ - -ifdef CONFIG_SPL_BUILD -obj-y += mux.o -endif - -obj-y += board.o diff --git a/board/phytec/pcm051/board.c b/board/phytec/pcm051/board.c deleted file mode 100644 index 6f1ada82c4..0000000000 --- a/board/phytec/pcm051/board.c +++ /dev/null @@ -1,258 +0,0 @@ -// SPDX-License-Identifier: GPL-2.0+ -/* - * board.c - * - * Board functions for Phytec phyCORE-AM335x (pcm051) based boards - * - * Copyright (C) 2013 Lemonage Software GmbH - * Author Lars Poeschel poeschel@lemonage.de - */ - -#include <common.h> -#include <env.h> -#include <errno.h> -#include <init.h> -#include <net.h> -#include <spl.h> -#include <asm/arch/cpu.h> -#include <asm/arch/hardware.h> -#include <asm/arch/omap.h> -#include <asm/arch/ddr_defs.h> -#include <asm/arch/clock.h> -#include <asm/arch/gpio.h> -#include <asm/arch/mmc_host_def.h> -#include <asm/arch/sys_proto.h> -#include <asm/io.h> -#include <asm/emif.h> -#include <asm/gpio.h> -#include <i2c.h> -#include <miiphy.h> -#include <cpsw.h> -#include "board.h" - -DECLARE_GLOBAL_DATA_PTR; - -/* MII mode defines */ -#define RMII_RGMII2_MODE_ENABLE 0x49 - -static struct ctrl_dev *cdev = (struct ctrl_dev *)CTRL_DEVICE_BASE; - -#ifdef CONFIG_SPL_BUILD - -/* DDR RAM defines */ -#define DDR_CLK_MHZ 303 /* DDR_DPLL_MULT value */ - -#define OSC (V_OSCK/1000000) -const struct dpll_params dpll_ddr = { - DDR_CLK_MHZ, OSC-1, 1, -1, -1, -1, -1}; - -const struct dpll_params *get_dpll_ddr_params(void) -{ - return &dpll_ddr; -} - -#ifdef CONFIG_REV1 -const struct ctrl_ioregs ioregs = { - .cm0ioctl = MT41J256M8HX15E_IOCTRL_VALUE, - .cm1ioctl = MT41J256M8HX15E_IOCTRL_VALUE, - .cm2ioctl = MT41J256M8HX15E_IOCTRL_VALUE, - .dt0ioctl = MT41J256M8HX15E_IOCTRL_VALUE, - .dt1ioctl = MT41J256M8HX15E_IOCTRL_VALUE, -}; - -static const struct ddr_data ddr3_data = { - .datardsratio0 = MT41J256M8HX15E_RD_DQS, - .datawdsratio0 = MT41J256M8HX15E_WR_DQS, - .datafwsratio0 = MT41J256M8HX15E_PHY_FIFO_WE, - .datawrsratio0 = MT41J256M8HX15E_PHY_WR_DATA, -}; - -static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = MT41J256M8HX15E_RATIO, - .cmd0iclkout = MT41J256M8HX15E_INVERT_CLKOUT, - - .cmd1csratio = MT41J256M8HX15E_RATIO, - .cmd1iclkout = MT41J256M8HX15E_INVERT_CLKOUT, - - .cmd2csratio = MT41J256M8HX15E_RATIO, - .cmd2iclkout = MT41J256M8HX15E_INVERT_CLKOUT, -}; - -static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = MT41J256M8HX15E_EMIF_SDCFG, - .ref_ctrl = MT41J256M8HX15E_EMIF_SDREF, - .sdram_tim1 = MT41J256M8HX15E_EMIF_TIM1, - .sdram_tim2 = MT41J256M8HX15E_EMIF_TIM2, - .sdram_tim3 = MT41J256M8HX15E_EMIF_TIM3, - .zq_config = MT41J256M8HX15E_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41J256M8HX15E_EMIF_READ_LATENCY | - PHY_EN_DYN_PWRDN, -}; - -void sdram_init(void) -{ - config_ddr(DDR_CLK_MHZ, &ioregs, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -} -#else -const struct ctrl_ioregs ioregs = { - .cm0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .cm2ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt0ioctl = MT41K256M16HA125E_IOCTRL_VALUE, - .dt1ioctl = MT41K256M16HA125E_IOCTRL_VALUE, -}; - -static const struct ddr_data ddr3_data = { - .datardsratio0 = MT41K256M16HA125E_RD_DQS, - .datawdsratio0 = MT41K256M16HA125E_WR_DQS, - .datafwsratio0 = MT41K256M16HA125E_PHY_FIFO_WE, - .datawrsratio0 = MT41K256M16HA125E_PHY_WR_DATA, -}; - -static const struct cmd_control ddr3_cmd_ctrl_data = { - .cmd0csratio = MT41K256M16HA125E_RATIO, - .cmd0iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - - .cmd1csratio = MT41K256M16HA125E_RATIO, - .cmd1iclkout = MT41K256M16HA125E_INVERT_CLKOUT, - - .cmd2csratio = MT41K256M16HA125E_RATIO, - .cmd2iclkout = MT41K256M16HA125E_INVERT_CLKOUT, -}; - -static struct emif_regs ddr3_emif_reg_data = { - .sdram_config = MT41K256M16HA125E_EMIF_SDCFG, - .ref_ctrl = MT41K256M16HA125E_EMIF_SDREF, - .sdram_tim1 = MT41K256M16HA125E_EMIF_TIM1, - .sdram_tim2 = MT41K256M16HA125E_EMIF_TIM2, - .sdram_tim3 = MT41K256M16HA125E_EMIF_TIM3, - .zq_config = MT41K256M16HA125E_ZQ_CFG, - .emif_ddr_phy_ctlr_1 = MT41K256M16HA125E_EMIF_READ_LATENCY | - PHY_EN_DYN_PWRDN, -}; - -void sdram_init(void) -{ - config_ddr(DDR_CLK_MHZ, &ioregs, &ddr3_data, - &ddr3_cmd_ctrl_data, &ddr3_emif_reg_data, 0); -} -#endif - -void set_uart_mux_conf(void) -{ - enable_uart0_pin_mux(); -} - -void set_mux_conf_regs(void) -{ - /* Initalize the board header */ - enable_i2c0_pin_mux(); - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - - enable_board_pin_mux(); -} -#endif - -/* - * Basic board specific setup. Pinmux has been handled already. - */ -int board_init(void) -{ - i2c_init(CONFIG_SYS_OMAP24_I2C_SPEED, CONFIG_SYS_OMAP24_I2C_SLAVE); - - gd->bd->bi_boot_params = CONFIG_SYS_SDRAM_BASE + 0x100; - - return 0; -} - -#ifdef CONFIG_DRIVER_TI_CPSW -static void cpsw_control(int enabled) -{ - /* VTP can be added here */ - - return; -} - -static struct cpsw_slave_data cpsw_slaves[] = { - { - .slave_reg_ofs = 0x208, - .sliver_reg_ofs = 0xd80, - .phy_addr = 0, - .phy_if = PHY_INTERFACE_MODE_RGMII, - }, - { - .slave_reg_ofs = 0x308, - .sliver_reg_ofs = 0xdc0, - .phy_addr = 1, - .phy_if = PHY_INTERFACE_MODE_RGMII, - }, -}; - -static struct cpsw_platform_data cpsw_data = { - .mdio_base = CPSW_MDIO_BASE, - .cpsw_base = CPSW_BASE, - .mdio_div = 0xff, - .channels = 8, - .cpdma_reg_ofs = 0x800, - .slaves = 1, - .slave_data = cpsw_slaves, - .ale_reg_ofs = 0xd00, - .ale_entries = 1024, - .host_port_reg_ofs = 0x108, - .hw_stats_reg_ofs = 0x900, - .bd_ram_ofs = 0x2000, - .mac_control = (1 << 5), - .control = cpsw_control, - .host_port_num = 0, - .version = CPSW_CTRL_VERSION_2, -}; -#endif - -#if defined(CONFIG_DRIVER_TI_CPSW) || \ - (defined(CONFIG_USB_ETHER) && defined(CONFIG_USB_MUSB_GADGET)) -int board_eth_init(bd_t *bis) -{ - int rv, n = 0; -#ifdef CONFIG_DRIVER_TI_CPSW - uint8_t mac_addr[6]; - uint32_t mac_hi, mac_lo; - - if (!eth_env_get_enetaddr("ethaddr", mac_addr)) { - printf("<ethaddr> not set. Reading from E-fuse\n"); - /* try reading mac address from efuse */ - mac_lo = readl(&cdev->macid0l); - mac_hi = readl(&cdev->macid0h); - mac_addr[0] = mac_hi & 0xFF; - mac_addr[1] = (mac_hi & 0xFF00) >> 8; - mac_addr[2] = (mac_hi & 0xFF0000) >> 16; - mac_addr[3] = (mac_hi & 0xFF000000) >> 24; - mac_addr[4] = mac_lo & 0xFF; - mac_addr[5] = (mac_lo & 0xFF00) >> 8; - - if (is_valid_ethaddr(mac_addr)) - eth_env_set_enetaddr("ethaddr", mac_addr); - else - goto try_usbether; - } - - writel(RMII_RGMII2_MODE_ENABLE, &cdev->miisel); - - rv = cpsw_register(&cpsw_data); - if (rv < 0) - printf("Error %d registering CPSW switch\n", rv); - else - n += rv; -try_usbether: -#endif - -#if defined(CONFIG_USB_ETHER) && !defined(CONFIG_SPL_BUILD) - rv = usb_eth_initialize(bis); - if (rv < 0) - printf("Error %d registering USB_ETHER\n", rv); - else - n += rv; -#endif - return n; -} -#endif diff --git a/board/phytec/pcm051/board.h b/board/phytec/pcm051/board.h deleted file mode 100644 index 3366e51c85..0000000000 --- a/board/phytec/pcm051/board.h +++ /dev/null @@ -1,24 +0,0 @@ -/* SPDX-License-Identifier: GPL-2.0+ */ -/* - * board.h - * - * Phytec phyCORE-AM335x (pcm051) boards information header - * - * Copyright (C) 2013, Lemonage Software GmbH - * Author Lars Poeschel poeschel@lemonage.de - */ - -#ifndef _BOARD_H_ -#define _BOARD_H_ - -/* - * We have three pin mux functions that must exist. We must be able to enable - * uart0, for initial output and i2c0 to read the main EEPROM. We then have a - * main pinmux function that can be overridden to enable all other pinmux that - * is required on the board. - */ -void enable_uart0_pin_mux(void); -void enable_i2c0_pin_mux(void); -void enable_board_pin_mux(void); -void enable_cbmux_pin_mux(void); -#endif diff --git a/board/phytec/pcm051/mux.c b/board/phytec/pcm051/mux.c deleted file mode 100644 index 9bca8eae9f..0000000000 --- a/board/phytec/pcm051/mux.c +++ /dev/null @@ -1,127 +0,0 @@ -/* - * mux.c - * - * Copyright (C) 2013 Lemonage Software GmbH - * Author Lars Poeschel poeschel@lemonage.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#include <common.h> -#include <asm/arch/sys_proto.h> -#include <asm/arch/hardware.h> -#include <asm/arch/mux.h> -#include <asm/io.h> -#include "board.h" - -static struct module_pin_mux uart0_pin_mux[] = { - {OFFSET(uart0_rxd), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* UART0_RXD */ - {OFFSET(uart0_txd), (MODE(0) | PULLUDEN)}, /* UART0_TXD */ - {-1}, -}; - -#ifdef CONFIG_MMC -static struct module_pin_mux mmc0_pin_mux[] = { - {OFFSET(mmc0_dat3), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT3 */ - {OFFSET(mmc0_dat2), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT2 */ - {OFFSET(mmc0_dat1), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT1 */ - {OFFSET(mmc0_dat0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_DAT0 */ - {OFFSET(mmc0_clk), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CLK */ - {OFFSET(mmc0_cmd), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* MMC0_CMD */ - {OFFSET(spi0_cs1), (MODE(5) | RXACTIVE | PULLUP_EN)}, /* MMC0_CD */ - {-1}, -}; -#endif - -#ifdef CONFIG_I2C -static struct module_pin_mux i2c0_pin_mux[] = { - {OFFSET(i2c0_sda), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_DATA */ - {OFFSET(i2c0_scl), (MODE(0) | RXACTIVE | - PULLUDEN | SLEWCTRL)}, /* I2C_SCLK */ - {-1}, -}; -#endif - -#ifdef CONFIG_SPI -static struct module_pin_mux spi0_pin_mux[] = { - {OFFSET(spi0_sclk), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_SCLK */ - {OFFSET(spi0_d0), (MODE(0) | RXACTIVE | - PULLUDEN | PULLUP_EN)}, /* SPI0_D0 */ - {OFFSET(spi0_d1), (MODE(0) | RXACTIVE | PULLUDEN)}, /* SPI0_D1 */ - {OFFSET(spi0_cs0), (MODE(0) | RXACTIVE | - PULLUDEN | PULLUP_EN)}, /* SPI0_CS0 */ - {-1}, -}; -#endif - -static struct module_pin_mux rmii1_pin_mux[] = { - {OFFSET(mii1_crs), MODE(1) | RXACTIVE}, /* RMII1_CRS */ - {OFFSET(mii1_rxerr), MODE(1) | RXACTIVE}, /* RMII1_RXERR */ - {OFFSET(mii1_txen), MODE(1)}, /* RMII1_TXEN */ - {OFFSET(mii1_txd1), MODE(1)}, /* RMII1_TXD1 */ - {OFFSET(mii1_txd0), MODE(1)}, /* RMII1_TXD0 */ - {OFFSET(mii1_rxd1), MODE(1) | RXACTIVE}, /* RMII1_RXD1 */ - {OFFSET(mii1_rxd0), MODE(1) | RXACTIVE}, /* RMII1_RXD0 */ - {OFFSET(mdio_data), MODE(0) | RXACTIVE | PULLUP_EN}, /* MDIO_DATA */ - {OFFSET(mdio_clk), MODE(0) | PULLUP_EN}, /* MDIO_CLK */ - {OFFSET(rmii1_refclk), MODE(0) | RXACTIVE}, /* RMII1_REFCLK */ - {-1}, -}; - -static struct module_pin_mux cbmux_pin_mux[] = { - {OFFSET(uart0_ctsn), MODE(7) | RXACTIVE | PULLDOWN_EN}, /* JP3 */ - {OFFSET(uart0_rtsn), MODE(7) | RXACTIVE | PULLUP_EN}, /* JP4 */ - {-1}, -}; - -#ifdef CONFIG_MTD_RAW_NAND -static struct module_pin_mux nand_pin_mux[] = { - {OFFSET(gpmc_ad0), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD0 */ - {OFFSET(gpmc_ad1), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD1 */ - {OFFSET(gpmc_ad2), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD2 */ - {OFFSET(gpmc_ad3), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD3 */ - {OFFSET(gpmc_ad4), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD4 */ - {OFFSET(gpmc_ad5), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD5 */ - {OFFSET(gpmc_ad6), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD6 */ - {OFFSET(gpmc_ad7), (MODE(0) | PULLUP_EN | RXACTIVE)}, /* NAND AD7 */ - {OFFSET(gpmc_wait0), (MODE(0) | RXACTIVE | PULLUP_EN)}, /* NAND WAIT */ - {OFFSET(gpmc_wpn), (MODE(7) | PULLUP_EN | RXACTIVE)}, /* NAND_WPN */ - {OFFSET(gpmc_csn0), (MODE(0) | PULLUDEN)}, /* NAND_CS0 */ - {OFFSET(gpmc_advn_ale), (MODE(0) | PULLUDEN)}, /* NAND_ADV_ALE */ - {OFFSET(gpmc_oen_ren), (MODE(0) | PULLUDEN)}, /* NAND_OE */ - {OFFSET(gpmc_wen), (MODE(0) | PULLUDEN)}, /* NAND_WEN */ - {OFFSET(gpmc_be0n_cle), (MODE(0) | PULLUDEN)}, /* NAND_BE_CLE */ - {-1}, -}; -#endif - -void enable_uart0_pin_mux(void) -{ - configure_module_pin_mux(uart0_pin_mux); -} - -void enable_i2c0_pin_mux(void) -{ - configure_module_pin_mux(i2c0_pin_mux); -} - -void enable_board_pin_mux() -{ - configure_module_pin_mux(rmii1_pin_mux); - configure_module_pin_mux(mmc0_pin_mux); - configure_module_pin_mux(cbmux_pin_mux); -#ifdef CONFIG_MTD_RAW_NAND - configure_module_pin_mux(nand_pin_mux); -#endif -#ifdef CONFIG_SPI - configure_module_pin_mux(spi0_pin_mux); -#endif -} diff --git a/configs/pcm051_rev1_defconfig b/configs/pcm051_rev1_defconfig deleted file mode 100644 index ea7a0769f2..0000000000 --- a/configs/pcm051_rev1_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_AM33XX=y -CONFIG_TARGET_PCM051=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="REV1" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_ETH_SUPPORT=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_NET_SUPPORT=y -CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL" -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_MMC_OMAP_HS=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=24000000 -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_SMSC=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETHER=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/configs/pcm051_rev3_defconfig b/configs/pcm051_rev3_defconfig deleted file mode 100644 index 43e64630ab..0000000000 --- a/configs/pcm051_rev3_defconfig +++ /dev/null @@ -1,60 +0,0 @@ -CONFIG_ARM=y -CONFIG_ARCH_CPU_INIT=y -CONFIG_ARCH_OMAP2PLUS=y -CONFIG_SPL_GPIO_SUPPORT=y -CONFIG_SPL_LIBCOMMON_SUPPORT=y -CONFIG_SPL_LIBGENERIC_SUPPORT=y -CONFIG_AM33XX=y -CONFIG_TARGET_PCM051=y -CONFIG_SPL_MMC_SUPPORT=y -CONFIG_SPL_SERIAL_SUPPORT=y -CONFIG_SPL=y -CONFIG_SPL_FS_FAT=y -CONFIG_SPL_LIBDISK_SUPPORT=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_SYS_EXTRA_OPTIONS="REV3" -# CONFIG_USE_BOOTCOMMAND is not set -CONFIG_SYS_CONSOLE_INFO_QUIET=y -CONFIG_VERSION_VARIABLE=y -CONFIG_ARCH_MISC_INIT=y -CONFIG_SPL_ENV_SUPPORT=y -CONFIG_SPL_ETH_SUPPORT=y -CONFIG_SPL_FS_EXT4=y -CONFIG_SPL_I2C_SUPPORT=y -# CONFIG_SPL_NAND_SUPPORT is not set -CONFIG_SPL_NET_SUPPORT=y -CONFIG_SPL_NET_VCI_STRING="pcm051 U-Boot SPL" -CONFIG_SPL_OS_BOOT=y -CONFIG_SPL_POWER_SUPPORT=y -CONFIG_SPL_WATCHDOG_SUPPORT=y -CONFIG_SPL_YMODEM_SUPPORT=y -CONFIG_CMD_SPL=y -CONFIG_CMD_ASKENV=y -CONFIG_CMD_EEPROM=y -CONFIG_CMD_GPIO=y -CONFIG_CMD_I2C=y -CONFIG_CMD_MMC=y -CONFIG_CMD_SF=y -CONFIG_CMD_SPI=y -CONFIG_CMD_USB=y -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_EXT4_WRITE=y -CONFIG_SYS_RELOC_GD_ENV_ADDR=y -CONFIG_ENV_VARS_UBOOT_RUNTIME_CONFIG=y -CONFIG_MMC_OMAP_HS=y -CONFIG_SPI_FLASH=y -CONFIG_SF_DEFAULT_SPEED=24000000 -CONFIG_SPI_FLASH_WINBOND=y -CONFIG_PHY_SMSC=y -CONFIG_MII=y -CONFIG_DRIVER_TI_CPSW=y -CONFIG_SPI=y -CONFIG_OMAP3_SPI=y -CONFIG_USB=y -CONFIG_USB_MUSB_HOST=y -CONFIG_USB_MUSB_GADGET=y -CONFIG_USB_MUSB_DSPS=y -CONFIG_USB_GADGET=y -CONFIG_USB_ETHER=y -CONFIG_FAT_WRITE=y -CONFIG_OF_LIBFDT=y diff --git a/include/configs/pcm051.h b/include/configs/pcm051.h deleted file mode 100644 index 706a8a2a87..0000000000 --- a/include/configs/pcm051.h +++ /dev/null @@ -1,128 +0,0 @@ -/* - * pcm051.h - * - * Phytec phyCORE-AM335x (pcm051) boards information header - * - * Copyright (C) 2013 Lemonage Software GmbH - * Author Lars Poeschel poeschel@lemonage.de - * - * This program is free software; you can redistribute it and/or - * modify it under the terms of the GNU General Public License as - * published by the Free Software Foundation version 2. - * - * This program is distributed "as is" WITHOUT ANY WARRANTY of any - * kind, whether express or implied; without even the implied warranty - * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the - * GNU General Public License for more details. - */ - -#ifndef __CONFIG_PCM051_H -#define __CONFIG_PCM051_H - -#include <configs/ti_am335x_common.h> - -#define CONFIG_MACH_TYPE MACH_TYPE_PCM051 - -/* set to negative value for no autoboot */ -#define BOOTENV_DEV_LEGACY_MMC(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel #instance "=" \ - "setenv mmcdev " #instance"; "\ - "setenv bootpart " #instance":2 ; "\ - "run mmcboot\0" - -#define BOOTENV_DEV_NAME_LEGACY_MMC(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOTENV_DEV_NAND(devtypeu, devtypel, instance) \ - "bootcmd_" #devtypel "=" \ - "run nandboot\0" - -#define BOOTENV_DEV_NAME_NAND(devtypeu, devtypel, instance) \ - #devtypel #instance " " - -#define BOOT_TARGET_DEVICES(func) \ - func(MMC, mmc, 0) \ - func(LEGACY_MMC, legacy_mmc, 0) \ - func(MMC, mmc, 1) \ - func(LEGACY_MMC, legacy_mmc, 1) \ - func(NAND, nand, 0) - -#define CONFIG_BOOTCOMMAND \ - "run distro_bootcmd" - -#include <config_distro_bootcmd.h> - -#include <environment/ti/dfu.h> -#include <environment/ti/mmc.h> - -#define CONFIG_EXTRA_ENV_SETTINGS \ - DEFAULT_LINUX_BOOT_ENV \ - DEFAULT_MMC_TI_ARGS \ - "bootfile=uImage\0" \ - "fdtfile=am335x-wega-rdk.dtb\0" \ - "console=ttyO0,115200n8\0" \ - "optargs=\0" \ - "ramroot=/dev/ram0 rw ramdisk_size=65536 initrd=${rdaddr},64M\0" \ - "ramrootfstype=ext2\0" \ - "bootenv=uEnv.txt\0" \ - "loadbootscript=load mmc ${mmcdev} ${loadaddr} boot.scr\0" \ - "bootscript=echo Running bootscript from mmc${mmcdev} ...; " \ - "source ${loadaddr}\0" \ - "loadbootenv=fatload mmc ${mmcdev} ${loadaddr} ${bootenv}\0" \ - "importbootenv=echo Importing environment from mmc ...; " \ - "env import -t $loadaddr $filesize\0" \ - "ramargs=setenv bootargs console=${console} " \ - "${optargs} " \ - "root=${ramroot} " \ - "rootfstype=${ramrootfstype}\0" \ - "loadramdisk=fatload mmc ${mmcdev} ${rdaddr} ramdisk.gz\0" \ - "loaduimagefat=fatload mmc ${mmcdev} ${loadaddr} ${bootfile}\0" \ - "loaduimage=ext2load mmc ${mmcdev}:2 ${loadaddr} ${bootfile}\0" \ - "mmcboot=echo Booting from mmc ...; " \ - "run args_mmc; " \ - "bootm ${loadaddr}\0" \ - "ramboot=echo Booting from ramdisk ...; " \ - "run ramargs; " \ - "bootm ${loadaddr}\0" \ - BOOTENV - -/* Clock Defines */ -#define V_OSCK 25000000 /* Clock output from T2 */ -#define V_SCLK (V_OSCK) - -/* - * memtest works on 8 MB in DRAM after skipping 32MB from - * start addr of ram disk - */ - -/* NS16550 Configuration */ -#define CONFIG_SYS_NS16550_COM1 0x44e09000 /* Base EVM has UART0 */ -#define CONFIG_SYS_NS16550_COM2 0x48022000 /* UART1 */ -#define CONFIG_SYS_NS16550_COM3 0x48024000 /* UART2 */ -#define CONFIG_SYS_NS16550_COM4 0x481a6000 /* UART3 */ -#define CONFIG_SYS_NS16550_COM5 0x481a8000 /* UART4 */ -#define CONFIG_SYS_NS16550_COM6 0x481aa000 /* UART5 */ - -/* I2C Configuration */ -#define CONFIG_ENV_EEPROM_IS_ON_I2C -#define CONFIG_SYS_I2C_EEPROM_ADDR 0x50 /* Main EEPROM */ -#define CONFIG_SYS_I2C_EEPROM_ADDR_LEN 2 - -#define CONFIG_SYS_BAUDRATE_TABLE { 110, 300, 600, 1200, 2400, \ -4800, 9600, 14400, 19200, 28800, 38400, 56000, 57600, 115200 } - -/* CPU */ - -#ifdef CONFIG_SPI_BOOT -#define CONFIG_SYS_SPI_U_BOOT_SIZE 0x40000 -#endif - -/* - * USB configuration - */ -#define CONFIG_AM335X_USB0 -#define CONFIG_AM335X_USB0_MODE MUSB_PERIPHERAL -#define CONFIG_AM335X_USB1 -#define CONFIG_AM335X_USB1_MODE MUSB_HOST - -#endif /* ! __CONFIG_PCM051_H */