This patch set adds NAND Flash Controller (NFC) support for Freescale Vybrid ARM SoCs (vf610).
The driver is based on Bill Pringlemeirs prelineary patch sent in January 2014 to the MTD mailing list: http://lists.infradead.org/pipermail/linux-arm-kernel/2014-January/226623.ht...
Changes in v2: - Renamed the driver from fsl_nfc to vf610_nfc - Use writel/readl in register access functions - Optimized some register accesses by read/write value only once in code - Use CONFIG_SYS_NAND_SELF_INIT and fix board_nand_init implementation - Removed uncommented code/fixed comments - Add CONFIG_USE_ARCH_MEMCPY for improved NAND performance - Use hweight32 for improved count_written_bits performance - Implement page_read/page_write rather than reuse MTD stacks version
Due to the duplicated initialization (missing SELF_INIT), page size was actually set to 0 which lead count_written_bits to not count the amount of written bits at all.
Performance numbers: V1 => optimized count_written_bits Read empty pages: 0.8MiB/s => 1.4MiB/s V1 => optimized memcpy => optimized page_read/page_write Read full pages: 3.6MiB/s => 7MiB/s => 10.3MiB/s
Stefan Agner (4): arm: vf610: add NFC pin mux arm: vf610: add NFC clock support mtd: nand: add Freescale NFC driver arm: vf610: add NAND support for vf610twr
arch/arm/include/asm/arch-vf610/crm_regs.h | 14 + arch/arm/include/asm/arch-vf610/imx-regs.h | 1 + arch/arm/include/asm/arch-vf610/iomux-vf610.h | 34 ++ arch/arm/include/asm/imx-common/iomux-v3.h | 4 + board/freescale/vf610twr/vf610twr.c | 47 +- configs/vf610twr_defconfig | 2 +- configs/vf610twr_nand_defconfig | 3 + drivers/mtd/nand/Makefile | 1 + drivers/mtd/nand/vf610_nfc.c | 706 ++++++++++++++++++++++++++ include/configs/vf610twr.h | 46 +- 10 files changed, 853 insertions(+), 5 deletions(-) create mode 100644 configs/vf610twr_nand_defconfig create mode 100644 drivers/mtd/nand/vf610_nfc.c