ZynqMP Emulation board is no longer tested and there is no reason to keep maintaining it.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
arch/arm/dts/Makefile | 1 - arch/arm/dts/zynqmp-ep108-clk.dtsi | 172 --------------------------- arch/arm/dts/zynqmp-ep108.dts | 235 ------------------------------------- configs/xilinx_zynqmp_ep_defconfig | 102 ---------------- include/configs/xilinx_zynqmp_ep.h | 24 ---- 5 files changed, 534 deletions(-) delete mode 100644 arch/arm/dts/zynqmp-ep108-clk.dtsi delete mode 100644 arch/arm/dts/zynqmp-ep108.dts delete mode 100644 configs/xilinx_zynqmp_ep_defconfig delete mode 100644 include/configs/xilinx_zynqmp_ep.h
diff --git a/arch/arm/dts/Makefile b/arch/arm/dts/Makefile index 20a4c37d48af..dd691429621c 100644 --- a/arch/arm/dts/Makefile +++ b/arch/arm/dts/Makefile @@ -146,7 +146,6 @@ dtb-$(CONFIG_ARCH_ZYNQ) += \ zynq-zturn-myir.dtb \ zynq-zybo.dtb dtb-$(CONFIG_ARCH_ZYNQMP) += \ - zynqmp-ep108.dtb \ zynqmp-mini-emmc.dtb \ zynqmp-mini-nand.dtb \ zynqmp-zcu102-revA.dtb \ diff --git a/arch/arm/dts/zynqmp-ep108-clk.dtsi b/arch/arm/dts/zynqmp-ep108-clk.dtsi deleted file mode 100644 index 12d9fe149888..000000000000 --- a/arch/arm/dts/zynqmp-ep108-clk.dtsi +++ /dev/null @@ -1,172 +0,0 @@ -/* - * clock specification for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2015, Xilinx, Inc. - * - * Michal Simek michal.simek@xilinx.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/ { - misc_clk: misc_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <25000000>; - u-boot,dm-pre-reloc; - }; - - i2c_clk: i2c_clk { - compatible = "fixed-clock"; - #clock-cells = <0x0>; - clock-frequency = <111111111>; - }; - - sata_clk: sata_clk { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <75000000>; - }; - - dp_aclk: clock0 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <50000000>; - clock-accuracy = <100>; - }; - - clk100: clk100 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <100000000>; - }; - - clk600: clk600 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <600000000>; - }; - - dp_aud_clk: clock1 { - compatible = "fixed-clock"; - #clock-cells = <0>; - clock-frequency = <22579200>; - clock-accuracy = <100>; - }; -}; - -&can0 { - clocks = <&misc_clk &misc_clk>; -}; - -&can1 { - clocks = <&misc_clk &misc_clk>; -}; - -&fpd_dma_chan1 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan2 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan3 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan4 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan5 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan6 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan7 { - clocks = <&clk600>, <&clk100>; -}; - -&fpd_dma_chan8 { - clocks = <&clk600>, <&clk100>; -}; - -&gem0 { - clocks = <&misc_clk>, <&misc_clk>, <&misc_clk>; -}; - -&gpio { - clocks = <&misc_clk>; -}; - -&i2c0 { - clocks = <&i2c_clk>; -}; - -&i2c1 { - clocks = <&i2c_clk>; -}; - -&nand0 { - clocks = <&misc_clk &misc_clk>; -}; - -&qspi { - clocks = <&misc_clk &misc_clk>; -}; - -&sata { - clocks = <&sata_clk>; -}; - -&sdhci0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&sdhci1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&spi0 { - clocks = <&misc_clk &misc_clk>; -}; - -&spi1 { - clocks = <&misc_clk &misc_clk>; -}; - -&uart0 { - clocks = <&misc_clk &misc_clk>; -}; - -&usb0 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&usb1 { - clocks = <&misc_clk>, <&misc_clk>; -}; - -&watchdog0 { - clocks= <&misc_clk>; -}; - -&xilinx_drm { - clocks = <&misc_clk>; -}; - -&xlnx_dp { - clocks = <&dp_aclk>, <&dp_aud_clk>; -}; - -&xlnx_dp_snd_codec0 { - clocks = <&dp_aud_clk>; -}; - -&xlnx_dpdma { - clocks = <&misc_clk>; -}; diff --git a/arch/arm/dts/zynqmp-ep108.dts b/arch/arm/dts/zynqmp-ep108.dts deleted file mode 100644 index a16ffdc3f0ce..000000000000 --- a/arch/arm/dts/zynqmp-ep108.dts +++ /dev/null @@ -1,235 +0,0 @@ -/* - * dts file for Xilinx ZynqMP ep108 development board - * - * (C) Copyright 2014 - 2015, Xilinx, Inc. - * - * Michal Simek michal.simek@xilinx.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/dts-v1/; - -#include "zynqmp.dtsi" -#include "zynqmp-ep108-clk.dtsi" - -/ { - model = "ZynqMP EP108"; - - aliases { - ethernet0 = &gem0; - mmc0 = &sdhci0; - mmc1 = &sdhci1; - serial0 = &uart0; - spi0 = &qspi; - spi1 = &spi0; - spi2 = &spi1; - usb0 = &usb0; - usb1 = &usb1; - }; - - chosen { - bootargs = "earlycon"; - stdout-path = "serial0:115200n8"; - }; - - memory@0 { - device_type = "memory"; - reg = <0x0 0x0 0x0 0x40000000>; - }; -}; - -&can0 { - status = "okay"; -}; - -&can1 { - status = "okay"; -}; - -&gem0 { - status = "okay"; - phy-handle = <&phy0>; - phy-mode = "rgmii-id"; - phy0: phy@0 { - reg = <0>; - max-speed = <100>; - }; -}; - -&gpio { - status = "okay"; -}; - -&i2c0 { - status = "okay"; - clock-frequency = <400000>; - eeprom@54 { - compatible = "atmel,24c64"; - reg = <0x54>; - }; -}; - -&i2c1 { - status = "okay"; - clock-frequency = <400000>; - eeprom@55 { - compatible = "atmel,24c64"; - reg = <0x55>; - }; -}; - -&nand0 { - status = "okay"; - arasan,has-mdma; - num-cs = <1>; - - partition@0 { /* for testing purpose */ - label = "nand-fsbl-uboot"; - reg = <0x0 0x0 0x400000>; - }; - partition@1 { /* for testing purpose */ - label = "nand-linux"; - reg = <0x0 0x400000 0x1400000>; - }; - partition@2 { /* for testing purpose */ - label = "nand-device-tree"; - reg = <0x0 0x1800000 0x400000>; - }; - partition@3 { /* for testing purpose */ - label = "nand-rootfs"; - reg = <0x0 0x1C00000 0x1400000>; - }; - partition@4 { /* for testing purpose */ - label = "nand-bitstream"; - reg = <0x0 0x3000000 0x400000>; - }; - partition@5 { /* for testing purpose */ - label = "nand-misc"; - reg = <0x0 0x3400000 0xFCC00000>; - }; -}; - -&qspi { - status = "okay"; - flash@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - reg = <0x0>; - spi-tx-bus-width = <1>; - spi-rx-bus-width = <4>; - spi-max-frequency = <10000000>; - partition@qspi-fsbl-uboot { /* for testing purpose */ - label = "qspi-fsbl-uboot"; - reg = <0x0 0x100000>; - }; - partition@qspi-linux { /* for testing purpose */ - label = "qspi-linux"; - reg = <0x100000 0x500000>; - }; - partition@qspi-device-tree { /* for testing purpose */ - label = "qspi-device-tree"; - reg = <0x600000 0x20000>; - }; - partition@qspi-rootfs { /* for testing purpose */ - label = "qspi-rootfs"; - reg = <0x620000 0x5E0000>; - }; - }; -}; - -&sata { - status = "okay"; - ceva,broken-gen2; - /* SATA Phy OOB timing settings */ - ceva,p0-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p0-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p0-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p0-retry-params = /bits/ 16 <0x0216 0x7F06>; - ceva,p1-cominit-params = /bits/ 8 <0x0F 0x25 0x18 0x29>; - ceva,p1-comwake-params = /bits/ 8 <0x04 0x0B 0x08 0x0F>; - ceva,p1-burst-params = /bits/ 8 <0x0A 0x08 0x4A 0x06>; - ceva,p1-retry-params = /bits/ 16 <0x0216 0x7F06>; -}; - -&sdhci0 { - status = "okay"; - bus-width = <8>; - xlnx,mio_bank = <2>; -}; - -&sdhci1 { - status = "okay"; - xlnx,mio_bank = <1>; -}; - -&spi0 { - status = "okay"; - num-cs = <1>; - spi0_flash0: spi0_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi0_flash0@0 { - label = "spi0_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&spi1 { - status = "okay"; - num-cs = <1>; - spi1_flash0: spi1_flash0@0 { - compatible = "m25p80"; - #address-cells = <1>; - #size-cells = <1>; - spi-max-frequency = <50000000>; - reg = <0>; - - spi1_flash0@0 { - label = "spi1_flash0"; - reg = <0x0 0x100000>; - }; - }; -}; - -&uart0 { - status = "okay"; -}; - -&usb0 { - status = "okay"; -}; - -&dwc3_0 { - status = "okay"; - dr_mode = "peripheral"; - maximum-speed = "high-speed"; -}; - -&usb1 { - status = "okay"; -}; - -&dwc3_1 { - status = "okay"; - dr_mode = "host"; - maximum-speed = "high-speed"; -}; - -&watchdog0 { - status = "okay"; -}; - -&xlnx_dp { - xlnx,max-pclock-frequency = <200000>; -}; - -&xlnx_dpdma { - xlnx,axi-clock-freq = <200000000>; -}; diff --git a/configs/xilinx_zynqmp_ep_defconfig b/configs/xilinx_zynqmp_ep_defconfig deleted file mode 100644 index a0c8f28b971a..000000000000 --- a/configs/xilinx_zynqmp_ep_defconfig +++ /dev/null @@ -1,102 +0,0 @@ -CONFIG_ARM=y -CONFIG_SYS_CONFIG_NAME="xilinx_zynqmp_ep" -CONFIG_ARCH_ZYNQMP=y -CONFIG_SYS_TEXT_BASE=0x8000000 -CONFIG_SYS_MALLOC_F_LEN=0x8000 -CONFIG_ZYNQ_SDHCI_MAX_FREQ=52000000 -CONFIG_ZYNQMP_USB=y -CONFIG_DEFAULT_DEVICE_TREE="zynqmp-ep108" -CONFIG_DEBUG_UART=y -CONFIG_AHCI=y -CONFIG_DISTRO_DEFAULTS=y -CONFIG_FIT=y -CONFIG_FIT_VERBOSE=y -CONFIG_SPL_LOAD_FIT=y -# CONFIG_DISPLAY_CPUINFO is not set -# CONFIG_DISPLAY_BOARDINFO is not set -CONFIG_SPL=y -CONFIG_SPL_OS_BOOT=y -CONFIG_SYS_PROMPT="ZynqMP> " -CONFIG_FASTBOOT=y -CONFIG_FASTBOOT_FLASH=y -CONFIG_FASTBOOT_FLASH_MMC_DEV=0 -# CONFIG_CMD_CONSOLE is not set -# CONFIG_CMD_XIMG is not set -CONFIG_CMD_THOR_DOWNLOAD=y -# CONFIG_CMD_EDITENV is not set -# CONFIG_CMD_ENV_EXISTS is not set -CONFIG_CMD_CLK=y -CONFIG_CMD_DFU=y -# CONFIG_CMD_FPGA is not set -CONFIG_CMD_GPIO=y -CONFIG_CMD_GPT=y -CONFIG_CMD_I2C=y -# CONFIG_CMD_LOADB is not set -# CONFIG_CMD_LOADS is not set -CONFIG_CMD_MMC=y -CONFIG_CMD_NAND_LOCK_UNLOCK=y -CONFIG_CMD_USB=y -# CONFIG_CMD_ITEST is not set -# CONFIG_CMD_SETEXPR is not set -CONFIG_CMD_TFTPPUT=y -# CONFIG_CMD_NFS is not set -CONFIG_CMD_TIME=y -CONFIG_CMD_TIMER=y -CONFIG_CMD_EXT4_WRITE=y -# CONFIG_SPL_ISO_PARTITION is not set -CONFIG_SPL_OF_CONTROL=y -CONFIG_OF_EMBED=y -CONFIG_ENV_IS_IN_FAT=y -CONFIG_NET_RANDOM_ETHADDR=y -CONFIG_SPL_DM=y -CONFIG_SPL_DM_SEQ_ALIAS=y -CONFIG_SCSI_AHCI=y -CONFIG_SATA_CEVA=y -CONFIG_DFU_RAM=y -CONFIG_FPGA_XILINX=y -CONFIG_FPGA_ZYNQMPPL=y -CONFIG_DM_GPIO=y -CONFIG_DM_I2C=y -CONFIG_SYS_I2C_CADENCE=y -CONFIG_MISC=y -CONFIG_DM_MMC=y -CONFIG_MMC_SDHCI=y -CONFIG_MMC_SDHCI_ZYNQ=y -CONFIG_ZYNQ_SDHCI_MIN_FREQ=100000 -CONFIG_NAND=y -CONFIG_NAND_ARASAN=y -CONFIG_SPI_FLASH=y -CONFIG_SPI_FLASH_BAR=y -CONFIG_SPI_FLASH_SPANSION=y -CONFIG_SPI_FLASH_STMICRO=y -CONFIG_SPI_FLASH_WINBOND=y -# CONFIG_SPI_FLASH_USE_4K_SECTORS is not set -CONFIG_PHY_MARVELL=y -CONFIG_PHY_NATSEMI=y -CONFIG_PHY_REALTEK=y -CONFIG_PHY_TI=y -CONFIG_PHY_VITESSE=y -CONFIG_DM_ETH=y -CONFIG_PHY_GIGE=y -CONFIG_ZYNQ_GEM=y -CONFIG_SCSI=y -CONFIG_DM_SCSI=y -CONFIG_DEBUG_UART_ZYNQ=y -CONFIG_DEBUG_UART_BASE=0xff000000 -CONFIG_DEBUG_UART_CLOCK=25000000 -CONFIG_DEBUG_UART_ANNOUNCE=y -CONFIG_ZYNQ_SERIAL=y -CONFIG_USB=y -CONFIG_USB_XHCI_HCD=y -CONFIG_USB_XHCI_DWC3=y -CONFIG_USB_XHCI_ZYNQMP=y -CONFIG_USB_DWC3=y -CONFIG_USB_DWC3_GADGET=y -CONFIG_USB_STORAGE=y -CONFIG_USB_GADGET=y -CONFIG_USB_GADGET_MANUFACTURER="Xilinx" -CONFIG_USB_GADGET_VENDOR_NUM=0x03fd -CONFIG_USB_GADGET_PRODUCT_NUM=0x0300 -CONFIG_USB_FUNCTION_THOR=y -# CONFIG_REGEX is not set -CONFIG_EFI_LOADER_BOUNCE_BUFFER=y diff --git a/include/configs/xilinx_zynqmp_ep.h b/include/configs/xilinx_zynqmp_ep.h deleted file mode 100644 index a26377a41274..000000000000 --- a/include/configs/xilinx_zynqmp_ep.h +++ /dev/null @@ -1,24 +0,0 @@ -/* - * Configuration for Xilinx ZynqMP emulation platforms - * - * (C) Copyright 2014 - 2015 Xilinx, Inc. - * Michal Simek michal.simek@xilinx.com - * Siva Durga Prasad Paladugu sivadur@xilinx.com - * - * Based on Configuration for Versatile Express - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#ifndef __CONFIG_ZYNQMP_EP_H -#define __CONFIG_ZYNQMP_EP_H - -#define CONFIG_ZYNQ_EEPROM -#define CONFIG_ZYNQMP_XHCI_LIST {ZYNQMP_USB0_XHCI_BASEADDR, \ - ZYNQMP_USB1_XHCI_BASEADDR} - -#define COUNTER_FREQUENCY 4000000 - -#include <configs/xilinx_zynqmp.h> - -#endif /* __CONFIG_ZYNQMP_EP_H */