[U-Boot] [PATCH 1/5] powerpc: ppc4xx: remove board support for KAREF and METROBOX

These boards have been orphaned for more than 6 months.

Signed-off-by: Masahiro Yamada yamada.m@jp.panasonic.com ---

arch/powerpc/cpu/ppc4xx/Kconfig | 8 - board/sandburst/common/flash.c | 493 ---------------- board/sandburst/common/sb_common.c | 349 ------------ board/sandburst/common/sb_common.h | 60 -- board/sandburst/karef/Kconfig | 12 - board/sandburst/karef/MAINTAINERS | 6 - board/sandburst/karef/Makefile | 16 - board/sandburst/karef/config.mk | 21 - board/sandburst/karef/hal_ka_of_auto.h | 324 ----------- board/sandburst/karef/hal_ka_sc_auto.h | 836 ---------------------------- board/sandburst/karef/init.S | 39 -- board/sandburst/karef/karef.c | 595 -------------------- board/sandburst/karef/karef.h | 60 -- board/sandburst/karef/karef_version.h | 10 - board/sandburst/karef/u-boot.lds.debug | 130 ----- board/sandburst/metrobox/Kconfig | 12 - board/sandburst/metrobox/MAINTAINERS | 6 - board/sandburst/metrobox/Makefile | 15 - board/sandburst/metrobox/config.mk | 16 - board/sandburst/metrobox/hal_xc_auto.h | 553 ------------------ board/sandburst/metrobox/init.S | 37 -- board/sandburst/metrobox/metrobox.c | 561 ------------------- board/sandburst/metrobox/metrobox.h | 29 - board/sandburst/metrobox/metrobox_version.h | 11 - board/sandburst/metrobox/u-boot.lds.debug | 130 ----- configs/KAREF_defconfig | 3 - configs/METROBOX_defconfig | 3 - doc/README.scrapyard | 2 + include/configs/KAREF.h | 284 ---------- include/configs/METROBOX.h | 349 ------------ 30 files changed, 2 insertions(+), 4968 deletions(-) delete mode 100644 board/sandburst/common/flash.c delete mode 100644 board/sandburst/common/sb_common.c delete mode 100644 board/sandburst/common/sb_common.h delete mode 100644 board/sandburst/karef/Kconfig delete mode 100644 board/sandburst/karef/MAINTAINERS delete mode 100644 board/sandburst/karef/Makefile delete mode 100644 board/sandburst/karef/config.mk delete mode 100644 board/sandburst/karef/hal_ka_of_auto.h delete mode 100644 board/sandburst/karef/hal_ka_sc_auto.h delete mode 100644 board/sandburst/karef/init.S delete mode 100644 board/sandburst/karef/karef.c delete mode 100644 board/sandburst/karef/karef.h delete mode 100644 board/sandburst/karef/karef_version.h delete mode 100644 board/sandburst/karef/u-boot.lds.debug delete mode 100644 board/sandburst/metrobox/Kconfig delete mode 100644 board/sandburst/metrobox/MAINTAINERS delete mode 100644 board/sandburst/metrobox/Makefile delete mode 100644 board/sandburst/metrobox/config.mk delete mode 100644 board/sandburst/metrobox/hal_xc_auto.h delete mode 100644 board/sandburst/metrobox/init.S delete mode 100644 board/sandburst/metrobox/metrobox.c delete mode 100644 board/sandburst/metrobox/metrobox.h delete mode 100644 board/sandburst/metrobox/metrobox_version.h delete mode 100644 board/sandburst/metrobox/u-boot.lds.debug delete mode 100644 configs/KAREF_defconfig delete mode 100644 configs/METROBOX_defconfig delete mode 100644 include/configs/KAREF.h delete mode 100644 include/configs/METROBOX.h

diff --git a/arch/powerpc/cpu/ppc4xx/Kconfig b/arch/powerpc/cpu/ppc4xx/Kconfig index 41b525c..7c645f1 100644 --- a/arch/powerpc/cpu/ppc4xx/Kconfig +++ b/arch/powerpc/cpu/ppc4xx/Kconfig @@ -226,12 +226,6 @@ config TARGET_ALPR config TARGET_P3P440 bool "Support p3p440"

-config TARGET_KAREF - bool "Support KAREF" - -config TARGET_METROBOX - bool "Support METROBOX" - config TARGET_XPEDITE1000 bool "Support xpedite1000"

@@ -306,8 +300,6 @@ source "board/mpl/pip405/Kconfig" source "board/pcs440ep/Kconfig" source "board/prodrive/alpr/Kconfig" source "board/prodrive/p3p440/Kconfig" -source "board/sandburst/karef/Kconfig" -source "board/sandburst/metrobox/Kconfig" source "board/sbc405/Kconfig" source "board/sc3/Kconfig" source "board/t3corp/Kconfig" diff --git a/board/sandburst/common/flash.c b/board/sandburst/common/flash.c deleted file mode 100644 index ad046be..0000000 --- a/board/sandburst/common/flash.c +++ /dev/null @@ -1,493 +0,0 @@ -/* - * (C) Copyright 2002-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * - * (C) Copyright 2002 Jun Gu jung@artesyncp.com - * Add support for Am29F016D and dynamic switch setting. - * - * SPDX-License-Identifier: GPL-2.0+ - */ -/* - * Ported from Ebony flash support - * Travis B. Sawyer - * Sandburst Corporation - */ -#include <common.h> -#include <asm/ppc4xx.h> -#include <asm/processor.h> - - -#undef DEBUG -#ifdef DEBUG -#define DEBUGF(x...) printf(x) -#else -#define DEBUGF(x...) -#endif /* DEBUG */ - - -flash_info_t flash_info[CONFIG_SYS_MAX_FLASH_BANKS]; /* info for FLASH chips */ - -static unsigned long flash_addr_table[8][CONFIG_SYS_MAX_FLASH_BANKS] = { - {0xfff80000} /* Boot Flash */ -}; - -/*----------------------------------------------------------------------- - * Functions - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info); -static int write_word (flash_info_t *info, ulong dest, ulong data); - - -#define ADDR0 0x5555 -#define ADDR1 0x2aaa -#define FLASH_WORD_SIZE unsigned char - - -/*----------------------------------------------------------------------- - */ - -unsigned long flash_init (void) -{ - unsigned long total_b = 0; - unsigned long size_b[CONFIG_SYS_MAX_FLASH_BANKS]; - unsigned short index = 0; - int i; - - - DEBUGF("\n"); - DEBUGF("FLASH: Index: %d\n", index); - - /* Init: no FLASHes known */ - for (i=0; i<CONFIG_SYS_MAX_FLASH_BANKS; ++i) { - flash_info[i].flash_id = FLASH_UNKNOWN; - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - - /* check whether the address is 0 */ - if (flash_addr_table[index][i] == 0) { - continue; - } - - /* call flash_get_size() to initialize sector address */ - size_b[i] = flash_get_size( - (vu_long *)flash_addr_table[index][i], &flash_info[i]); - flash_info[i].size = size_b[i]; - if (flash_info[i].flash_id == FLASH_UNKNOWN) { - printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx = %ld MB\n", - i, size_b[i], size_b[i]<<20); - flash_info[i].sector_count = -1; - flash_info[i].size = 0; - } - - total_b += flash_info[i].size; - } - - return total_b; -} - - -/*----------------------------------------------------------------------- - */ -void flash_print_info (flash_info_t *info) -{ - int i; - int k; - int size; - int erased; - volatile unsigned long *flash; - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("missing or unknown FLASH type\n"); - return; - } - - switch (info->flash_id & FLASH_VENDMASK) { - case FLASH_MAN_AMD: printf ("AMD "); break; - default: printf ("Unknown Vendor "); break; - } - - switch (info->flash_id & FLASH_TYPEMASK) { - case FLASH_AM040: printf ("AM29F040 (512 Kbit, uniform sector size)\n"); - break; - default: printf ("Unknown Chip Type\n"); - break; - } - - printf (" Size: %ld KB in %d Sectors\n", - info->size >> 10, info->sector_count); - - printf (" Sector Start Addresses:"); - for (i=0; i<info->sector_count; ++i) { - /* - * Check if whole sector is erased - */ - if (i != (info->sector_count-1)) - size = info->start[i+1] - info->start[i]; - else - size = info->start[0] + info->size - info->start[i]; - erased = 1; - flash = (volatile unsigned long *)info->start[i]; - size = size >> 2; /* divide by 4 for longword access */ - for (k=0; k<size; k++) - { - if (*flash++ != 0xffffffff) - { - erased = 0; - break; - } - } - - if ((i % 5) == 0) - printf ("\n "); - printf (" %08lX%s%s", - info->start[i], - erased ? " E" : " ", - info->protect[i] ? "RO " : " " - ); - } - printf ("\n"); - return; - } - -/*----------------------------------------------------------------------- - */ - - -/*----------------------------------------------------------------------- - */ - -/* - * The following code cannot be run from FLASH! - */ -static ulong flash_get_size (vu_long *addr, flash_info_t *info) -{ - short i; - FLASH_WORD_SIZE value; - ulong base = (ulong)addr; - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *)addr; - - DEBUGF("FLASH ADDR: %08x\n", (unsigned)addr ); - - /* Write auto select command: read Manufacturer ID */ - udelay(10000); - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - udelay(1000); - addr2[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - udelay(1000); - addr2[ADDR0] = (FLASH_WORD_SIZE)0x00900090; - udelay(1000); - - value = addr2[0]; - - DEBUGF("FLASH MANUFACT: %x\n", value); - - switch (value) { - case (FLASH_WORD_SIZE)AMD_MANUFACT: - info->flash_id = FLASH_MAN_AMD; - break; - default: - info->flash_id = FLASH_UNKNOWN; - info->sector_count = 0; - info->size = 0; - return (0); /* no or unknown flash */ - } - - value = addr2[1]; /* device ID */ - - DEBUGF("\nFLASH DEVICEID: %x\n", value); - - switch (value) { - case (FLASH_WORD_SIZE)AMD_ID_LV040B: - info->flash_id += FLASH_AM040; - info->sector_count = 8; - info->size = 0x00080000; /* => 512 kb */ - break; - - default: - info->flash_id = FLASH_UNKNOWN; - return (0); /* => no or unknown flash */ - - } - - /* set up sector start address table */ - if (info->flash_id == FLASH_AM040) { - for (i = 0; i < info->sector_count; i++) - info->start[i] = base + (i * 0x00010000); - } else { - if (info->flash_id & FLASH_BTYPE) { - /* set sector offsets for bottom boot block type */ - info->start[0] = base + 0x00000000; - info->start[1] = base + 0x00004000; - info->start[2] = base + 0x00006000; - info->start[3] = base + 0x00008000; - for (i = 4; i < info->sector_count; i++) { - info->start[i] = base + (i * 0x00010000) - 0x00030000; - } - } else { - /* set sector offsets for top boot block type */ - i = info->sector_count - 1; - info->start[i--] = base + info->size - 0x00004000; - info->start[i--] = base + info->size - 0x00006000; - info->start[i--] = base + info->size - 0x00008000; - for (; i >= 0; i--) { - info->start[i] = base + i * 0x00010000; - } - } - } - - /* check for protected sectors */ - for (i = 0; i < info->sector_count; i++) { - /* read sector protection at sector address, (A7 .. A0) = 0x02 */ - /* D0 = 1 if protected */ - addr2 = (volatile FLASH_WORD_SIZE *)(info->start[i]); - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) - info->protect[i] = 0; - else - info->protect[i] = addr2[2] & 1; - } - - /* reset to return to reading data */ - addr2[0] = (FLASH_WORD_SIZE) 0x00F000F0; /* reset bank */ - - /* - * Prevent writes to uninitialized FLASH. - */ - if (info->flash_id != FLASH_UNKNOWN) { - addr2 = (FLASH_WORD_SIZE *)info->start[0]; - *addr2 = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ - } - - return (info->size); -} - -int wait_for_DQ7(flash_info_t *info, int sect) -{ - ulong start, now, last; - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[sect]); - - start = get_timer (0); - last = start; - while ((addr[0] & (FLASH_WORD_SIZE)0x00800080) != (FLASH_WORD_SIZE)0x00800080) { - if ((now = get_timer(start)) > CONFIG_SYS_FLASH_ERASE_TOUT) { - printf ("Timeout\n"); - return -1; - } - /* show that we're waiting */ - if ((now - last) > 1000) { /* every second */ - putc ('.'); - last = now; - } - } - return 0; -} - -/*----------------------------------------------------------------------- - */ - -int flash_erase (flash_info_t *info, int s_first, int s_last) -{ - volatile FLASH_WORD_SIZE *addr = (FLASH_WORD_SIZE *)(info->start[0]); - volatile FLASH_WORD_SIZE *addr2; - int flag, prot, sect; - int i; - - if ((s_first < 0) || (s_first > s_last)) { - if (info->flash_id == FLASH_UNKNOWN) { - printf ("- missing\n"); - } else { - printf ("- no sectors to erase\n"); - } - return 1; - } - - if (info->flash_id == FLASH_UNKNOWN) { - printf ("Can't erase unknown flash type - aborted\n"); - return 1; - } - - prot = 0; - for (sect=s_first; sect<=s_last; ++sect) { - if (info->protect[sect]) { - prot++; - } - } - - if (prot) { - printf ("- Warning: %d protected sectors will not be erased!\n", - prot); - } else { - printf ("\n"); - } - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts(); - - /* Start erase on unprotected sectors */ - for (sect = s_first; sect<=s_last; sect++) { - if (info->protect[sect] == 0) { /* not protected */ - addr2 = (FLASH_WORD_SIZE *)(info->start[sect]); - DEBUGF("Erasing sector %p\n", addr2); - - if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_SST) { - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[0] = (FLASH_WORD_SIZE)0x00500050; /* block erase */ - for (i=0; i<50; i++) - udelay(1000); /* wait 1 ms */ - } else { - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00800080; - addr[ADDR0] = (FLASH_WORD_SIZE)0x00AA00AA; - addr[ADDR1] = (FLASH_WORD_SIZE)0x00550055; - addr2[0] = (FLASH_WORD_SIZE)0x00300030; /* sector erase */ - } - /* - * Wait for each sector to complete, it's more - * reliable. According to AMD Spec, you must - * issue all erase commands within a specified - * timeout. This has been seen to fail, especially - * if printf()s are included (for debug)!! - */ - wait_for_DQ7(info, sect); - } - } - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts(); - - /* wait at least 80us - let's wait 1 ms */ - udelay (1000); - - /* reset to read mode */ - addr = (FLASH_WORD_SIZE *)info->start[0]; - addr[0] = (FLASH_WORD_SIZE)0x00F000F0; /* reset bank */ - - printf (" done\n"); - return 0; -} - -/*----------------------------------------------------------------------- - * Copy memory to flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ - -int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt) -{ - ulong cp, wp, data; - int i, l, rc; - - wp = (addr & ~3); /* get lower word aligned address */ - - /* - * handle unaligned start bytes - */ - if ((l = addr - wp) != 0) { - data = 0; - for (i=0, cp=wp; i<l; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - for (; i<4 && cnt>0; ++i) { - data = (data << 8) | *src++; - --cnt; - ++cp; - } - for (; cnt==0 && i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - } - - /* - * handle word aligned part - */ - while (cnt >= 4) { - data = 0; - for (i=0; i<4; ++i) { - data = (data << 8) | *src++; - } - if ((rc = write_word(info, wp, data)) != 0) { - return (rc); - } - wp += 4; - cnt -= 4; - } - - if (cnt == 0) { - return (0); - } - - /* - * handle unaligned tail bytes - */ - data = 0; - for (i=0, cp=wp; i<4 && cnt>0; ++i, ++cp) { - data = (data << 8) | *src++; - --cnt; - } - for (; i<4; ++i, ++cp) { - data = (data << 8) | (*(uchar *)cp); - } - - return (write_word(info, wp, data)); -} - -/*----------------------------------------------------------------------- - * Write a word to Flash, returns: - * 0 - OK - * 1 - write timeout - * 2 - Flash not erased - */ -static int write_word (flash_info_t * info, ulong dest, ulong data) -{ - volatile FLASH_WORD_SIZE *addr2 = (FLASH_WORD_SIZE *) (info->start[0]); - volatile FLASH_WORD_SIZE *dest2 = (FLASH_WORD_SIZE *) dest; - volatile FLASH_WORD_SIZE *data2 = (FLASH_WORD_SIZE *) & data; - ulong start; - int i; - - /* Check if Flash is (sufficiently) erased */ - if ((*((volatile FLASH_WORD_SIZE *) dest) & - (FLASH_WORD_SIZE) data) != (FLASH_WORD_SIZE) data) { - return (2); - } - - for (i = 0; i < 4 / sizeof (FLASH_WORD_SIZE); i++) { - int flag; - - /* Disable interrupts which might cause a timeout here */ - flag = disable_interrupts (); - - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00AA00AA; - addr2[ADDR1] = (FLASH_WORD_SIZE) 0x00550055; - addr2[ADDR0] = (FLASH_WORD_SIZE) 0x00A000A0; - - dest2[i] = data2[i]; - - /* re-enable interrupts if necessary */ - if (flag) - enable_interrupts (); - - /* data polling for D7 */ - start = get_timer (0); - while ((dest2[i] & (FLASH_WORD_SIZE) 0x00800080) != - (data2[i] & (FLASH_WORD_SIZE) 0x00800080)) { - - if (get_timer (start) > CONFIG_SYS_FLASH_WRITE_TOUT) { - return (1); - } - } - } - - return (0); -} diff --git a/board/sandburst/common/sb_common.c b/board/sandburst/common/sb_common.c deleted file mode 100644 index c23ef50..0000000 --- a/board/sandburst/common/sb_common.c +++ /dev/null @@ -1,349 +0,0 @@ -/* - * Copyright (C) 2005 Sandburst Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <i2c.h> -#include "sb_common.h" - -DECLARE_GLOBAL_DATA_PTR; - -long int fixed_sdram (void); - -/************************************************************************* - * metrobox_get_master - * - * PRI_N - active low signal. If the GPIO pin is low we are the master - * - ************************************************************************/ -int sbcommon_get_master(void) -{ - ppc440_gpio_regs_t *gpio_regs; - - gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; - - if (gpio_regs->in & SBCOMMON_GPIO_PRI_N) { - return 0; - } - else { - return 1; - } -} - -/************************************************************************* - * metrobox_secondary_present - * - * Figure out if secondary/slave board is present - * - ************************************************************************/ -int sbcommon_secondary_present(void) -{ - ppc440_gpio_regs_t *gpio_regs; - - gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; - - if (gpio_regs->in & SBCOMMON_GPIO_SEC_PRES) - return 0; - else - return 1; -} - -/************************************************************************* - * sbcommon_get_serial_number - * - * Retrieve the board serial number via the mac address in eeprom - * - ************************************************************************/ -unsigned short sbcommon_get_serial_number(void) -{ - unsigned char buff[0x100]; - unsigned short sernum; - - /* Get the board serial number from eeprom */ - /* Initialize I2C */ - i2c_set_bus_num(0); - - /* Read 256 bytes in EEPROM */ - i2c_read (0x50, 0, 1, buff, 0x100); - - memcpy(&sernum, &buff[0xF4], 2); - sernum /= 32; - - return (sernum); -} - -/************************************************************************* - * sbcommon_fans - * - * Spin up fans 2 & 3 to get some air moving. OS will take care - * of the rest. This is mostly a precaution... - * - * Assumes i2c bus 1 is ready. - * - ************************************************************************/ -void sbcommon_fans(void) -{ - /* - * Attempt to turn on 2 of the fans... - * Need to go through the bridge - */ - i2c_set_bus_num(1); - puts ("FANS: "); - - /* select fan4 through the bridge */ - i2c_reg_write(0x73, /* addr */ - 0x00, /* reg */ - 0x08); /* val = bus 4 */ - - /* Turn on FAN 4 */ - i2c_reg_write(0x2e, - 1, - 0x80); - - i2c_reg_write(0x2e, - 0, - 0x19); - - /* Deselect bus 4 on the bridge */ - i2c_reg_write(0x73, - 0x00, - 0x00); - - /* select fan3 through the bridge */ - i2c_reg_write(0x73, /* addr */ - 0x00, /* reg */ - 0x04); /* val = bus 3 */ - - /* Turn on FAN 3 */ - i2c_reg_write(0x2e, - 1, - 0x80); - - i2c_reg_write(0x2e, - 0, - 0x19); - - /* Deselect bus 3 on the bridge */ - i2c_reg_write(0x73, - 0x00, - 0x00); - - /* select fan2 through the bridge */ - i2c_reg_write(0x73, /* addr */ - 0x00, /* reg */ - 0x02); /* val = bus 4 */ - - /* Turn on FAN 2 */ - i2c_reg_write(0x2e, - 1, - 0x80); - - i2c_reg_write(0x2e, - 0, - 0x19); - - /* Deselect bus 2 on the bridge */ - i2c_reg_write(0x73, - 0x00, - 0x00); - - /* select fan1 through the bridge */ - i2c_reg_write(0x73, /* addr */ - 0x00, /* reg */ - 0x01); /* val = bus 0 */ - - /* Turn on FAN 1 */ - i2c_reg_write(0x2e, - 1, - 0x80); - - i2c_reg_write(0x2e, - 0, - 0x19); - - /* Deselect bus 1 on the bridge */ - i2c_reg_write(0x73, - 0x00, - 0x00); - - puts ("on\n"); - i2c_set_bus_num(0); - - return; - -} - -/************************************************************************* - * initdram - * - * Initialize sdram - * - ************************************************************************/ -phys_size_t initdram (int board_type) -{ - long dram_size = 0; - -#if defined(CONFIG_SPD_EEPROM) - dram_size = spd_sdram (); -#else - dram_size = fixed_sdram (); -#endif - return dram_size; -} - - -/************************************************************************* - * testdram - * - * - ************************************************************************/ -#if defined(CONFIG_SYS_DRAM_TEST) -int testdram (void) -{ - uint *pstart = (uint *) CONFIG_SYS_MEMTEST_START; - uint *pend = (uint *) CONFIG_SYS_MEMTEST_END; - uint *p; - - printf("Testing SDRAM: "); - for (p = pstart; p < pend; p++) - *p = 0xaaaaaaaa; - - for (p = pstart; p < pend; p++) { - if (*p != 0xaaaaaaaa) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - for (p = pstart; p < pend; p++) - *p = 0x55555555; - - for (p = pstart; p < pend; p++) { - if (*p != 0x55555555) { - printf ("SDRAM test fails at: %08x\n", (uint) p); - return 1; - } - } - - printf("OK\n"); - return 0; -} -#endif - -#if !defined(CONFIG_SPD_EEPROM) -/************************************************************************* - * fixed sdram init -- doesn't use serial presence detect. - * - * Assumes: 128 MB, non-ECC, non-registered - * PLB @ 133 MHz - * - ************************************************************************/ -long int fixed_sdram (void) -{ - uint reg; - - /*-------------------------------------------------------------------- - * Setup some default - *------------------------------------------------------------------*/ - mtsdram (SDRAM0_UABBA, 0x00000000); /* ubba=0 (default) */ - mtsdram (SDRAM0_SLIO, 0x00000000); /* rdre=0 wrre=0 rarw=0 */ - mtsdram (SDRAM0_DEVOPT, 0x00000000); /* dll=0 ds=0 (normal) */ - mtsdram (SDRAM0_WDDCTR, 0x00000000); /* wrcp=0 dcd=0 */ - mtsdram (SDRAM0_CLKTR, 0x40000000); /* clkp=1 (90 deg wr) dcdt=0 */ - - /*-------------------------------------------------------------------- - * Setup for board-specific specific mem - *------------------------------------------------------------------*/ - /* - * Following for CAS Latency = 2.5 @ 133 MHz PLB - */ - mtsdram (SDRAM0_B0CR, 0x000a4001); /* SDBA=0x000 128MB, Mode 3, enabled */ - mtsdram (SDRAM0_TR0, 0x410a4012); /* WR=2 WD=1 CL=2.5 PA=3 CP=4 LD=2 */ - /* RA=10 RD=3 */ - mtsdram (SDRAM0_TR1, 0x8080082f); /* SS=T2 SL=STAGE 3 CD=1 CT=0x02f */ - mtsdram (SDRAM0_RTR, 0x08200000); /* Rate 15.625 ns @ 133 MHz PLB */ - mtsdram (SDRAM0_CFG1, 0x00000000); /* Self-refresh exit, disable PM */ - udelay (400); /* Delay 200 usecs (min) */ - - /*-------------------------------------------------------------------- - * Enable the controller, then wait for DCEN to complete - *------------------------------------------------------------------*/ - mtsdram (SDRAM0_CFG0, 0x86000000); /* DCEN=1, PMUD=1, 64-bit */ - for (;;) { - mfsdram (SDRAM0_MCSTS, reg); - if (reg & 0x80000000) - break; - } - - return (128 * 1024 * 1024); /* 128 MB */ -} -#endif /* !defined(CONFIG_SPD_EEPROM) */ - -/************************************************************************* - * board_get_enetaddr - * - * Get the ethernet MAC address for the management ethernet from the - * strap EEPROM. Note that is the BASE address for the range of - * external ethernet MACs on the board. The base + 31 is the actual - * mgmt mac address. - * - ************************************************************************/ - -void board_get_enetaddr(int macaddr_idx, uchar *enet) -{ - int i; - unsigned short tmp; - unsigned char buff[0x100], *cp; - - if (0 == macaddr_idx) { - - /* Initialize I2C */ - i2c_set_bus_num(0); - - /* Read 256 bytes in EEPROM */ - i2c_read (0x50, 0, 1, buff, 0x100); - - cp = &buff[0xF0]; - - for (i = 0; i < 6; i++,cp++) - enet[i] = *cp; - - memcpy(&tmp, &enet[4], 2); - tmp += 31; - memcpy(&enet[4], &tmp, 2); - - } else { - enet[0] = 0x02; - enet[1] = 0x00; - enet[2] = 0x00; - enet[3] = 0x00; - enet[4] = 0x00; - if (1 == sbcommon_get_master() ) { - /* Master/Primary card */ - enet[5] = 0x01; - } else { - /* Slave/Secondary card */ - enet [5] = 0x02; - } - } - - return; -} - -#ifdef CONFIG_POST -/* - * Returns 1 if keys pressed to start the power-on long-running tests - * Called from board_init_f(). - */ -int post_hotkeys_pressed(void) -{ - - return (ctrlc()); -} -#endif diff --git a/board/sandburst/common/sb_common.h b/board/sandburst/common/sb_common.h deleted file mode 100644 index 5740633..0000000 --- a/board/sandburst/common/sb_common.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef __SBCOMMON_H__ -#define __SBCOMMON_H__ -/* - * Copyright (C) 2005 Sandburst Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <config.h> -#include <common.h> -#include <command.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <i2c.h> - -/* - * GPIO Settings - */ -/* Chassis settings */ -#define SBCOMMON_GPIO_PRI_N 0x00001000 /* 0 = Chassis Master, 1 = Slave */ -#define SBCOMMON_GPIO_SEC_PRES 0x00000800 /* 1 = Other board present */ - -/* Debug LEDs */ -#define SBCOMMON_GPIO_DBGLED_0 0x00000400 -#define SBCOMMON_GPIO_DBGLED_1 0x00000200 -#define SBCOMMON_GPIO_DBGLED_2 0x00100000 -#define SBCOMMON_GPIO_DBGLED_3 0x00000100 - -#define SBCOMMON_GPIO_DBGLEDS (SBCOMMON_GPIO_DBGLED_0 | \ - SBCOMMON_GPIO_DBGLED_1 | \ - SBCOMMON_GPIO_DBGLED_2 | \ - SBCOMMON_GPIO_DBGLED_3) - -#define SBCOMMON_GPIO_SYS_FAULT 0x00000080 -#define SBCOMMON_GPIO_SYS_OTEMP 0x00000040 -#define SBCOMMON_GPIO_SYS_STATUS 0x00000020 - -#define SBCOMMON_GPIO_SYS_LEDS (SBCOMMON_GPIO_SYS_STATUS) - -#define SBCOMMON_GPIO_LEDS (SBCOMMON_GPIO_DBGLED_0 | \ - SBCOMMON_GPIO_DBGLED_1 | \ - SBCOMMON_GPIO_DBGLED_2 | \ - SBCOMMON_GPIO_DBGLED_3 | \ - SBCOMMON_GPIO_SYS_STATUS) - -typedef struct ppc440_gpio_regs { - volatile unsigned long out; - volatile unsigned long tri_state; - volatile unsigned long dummy[4]; - volatile unsigned long open_drain; - volatile unsigned long in; -} __attribute__((packed)) ppc440_gpio_regs_t; - -int sbcommon_get_master(void); -int sbcommon_secondary_present(void); -unsigned short sbcommon_get_serial_number(void); -void sbcommon_fans(void); -void board_get_enetaddr(int macaddr_idx, uchar *enet); - -#endif /* __SBCOMMON_H__ */ diff --git a/board/sandburst/karef/Kconfig b/board/sandburst/karef/Kconfig deleted file mode 100644 index 1b04576..0000000 --- a/board/sandburst/karef/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_KAREF - -config SYS_BOARD - default "karef" - -config SYS_VENDOR - default "sandburst" - -config SYS_CONFIG_NAME - default "KAREF" - -endif diff --git a/board/sandburst/karef/MAINTAINERS b/board/sandburst/karef/MAINTAINERS deleted file mode 100644 index 21510e8..0000000 --- a/board/sandburst/karef/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -KAREF BOARD -#M: Travis Sawyer travis.sawyer@sandburst.com -S: Orphan (since 2014-03) -F: board/sandburst/karef/ -F: include/configs/KAREF.h -F: configs/KAREF_defconfig diff --git a/board/sandburst/karef/Makefile b/board/sandburst/karef/Makefile deleted file mode 100644 index ce29b41..0000000 --- a/board/sandburst/karef/Makefile +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2005 -# Sandburst Corporation -# Travis B. Sawyer -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# TBS: add for debugging purposes -ccflags-y += -DBUILDUSER='"$(shell whoami)"' - -obj-y = karef.o ../common/flash.o ../common/sb_common.o -extra-y += init.o diff --git a/board/sandburst/karef/config.mk b/board/sandburst/karef/config.mk deleted file mode 100644 index b73986d..0000000 --- a/board/sandburst/karef/config.mk +++ /dev/null @@ -1,21 +0,0 @@ -# -# (C) Copyright 2005 -# Sandburst Corporation -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# -# Sandburst Corporation Metrobox Reference Design -# Travis B. Sawyer -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/sandburst/karef/hal_ka_of_auto.h b/board/sandburst/karef/hal_ka_of_auto.h deleted file mode 100644 index cc501c9..0000000 --- a/board/sandburst/karef/hal_ka_of_auto.h +++ /dev/null @@ -1,324 +0,0 @@ -/* **************************************************************** - * Common defs for reg spec for chip ka_of - * Auto-generated by trex2: DO NOT HAND-EDIT!! - * **************************************************************** - */ - -#ifndef HAL_KA_OF_AUTO_H -#define HAL_KA_OF_AUTO_H - - -/* ---------------------------------------------------------------- - * For block: 'ofem' - */ - -/* ---- Block instance addressing (for block-select) */ -#define OFEM_BLOCK_ADDR_BIT_L 6 -#define OFEM_BLOCK_ADDR_BIT_H 9 -#define OFEM_BLOCK_ADDR_WIDTH 4 - -#define OFEM_ADDR 0x0 - -/* ---- Reg addressing (within block) */ -#define OFEM_REG_ADDR_BIT_L 2 -#define OFEM_REG_ADDR_BIT_H 5 -#define OFEM_REG_ADDR_WIDTH 4 - - -/* ================================================================ - * ---- Register KA_OF_OFEM_REVISION */ -#define SAND_HAL_KA_OF_OFEM_REVISION_OFFSET 0x000 -#ifndef SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_REVISION_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_REVISION_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_REVISION_MSB 31 -#define SAND_HAL_KA_OF_OFEM_REVISION_LSB 0 - -/* ================================================================ - * ---- Register KA_OF_OFEM_RESET */ -#define SAND_HAL_KA_OF_OFEM_RESET_OFFSET 0x004 -#ifndef SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_RESET_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_RESET_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_RESET_MSB 31 -#define SAND_HAL_KA_OF_OFEM_RESET_LSB 0 - -/* ================================================================ - * ---- Register KA_OF_OFEM_CNTL */ -#define SAND_HAL_KA_OF_OFEM_CNTL_OFFSET 0x018 -#ifndef SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_CNTL_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_CNTL_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_CNTL_MSB 31 -#define SAND_HAL_KA_OF_OFEM_CNTL_LSB 0 - -/* ================================================================ - * ---- Register KA_OF_OFEM_MAC_FLOW_CTL */ -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_OFFSET 0x01c -#ifndef SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MSB 31 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LSB 0 - -/* ================================================================ - * ---- Register KA_OF_OFEM_INTERRUPT */ -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_OFFSET 0x008 -#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MSB 31 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_LSB 0 - -/* ================================================================ - * ---- Register KA_OF_OFEM_INTERRUPT_MASK */ -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_OFFSET 0x00c -#ifndef SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MSB 31 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_LSB 0 - -/* ================================================================ - * ---- Register KA_OF_OFEM_SCRATCH */ -#define SAND_HAL_KA_OF_OFEM_SCRATCH_OFFSET 0x010 -#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_SCRATCH_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MSB 31 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_LSB 0 - -/* ================================================================ - * ---- Register KA_OF_OFEM_SCRATCH_MASK */ -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_OFFSET 0x014 -#ifndef SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_MSB 31 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_LSB 0 - -/* ================================================================ - * Field info for register KA_OF_OFEM_REVISION */ -#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK 0x0000ff00 -#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT 8 -#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MSB 15 -#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_LSB 8 -#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_DEFAULT 0x00000024 -#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK 0x000000ff -#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MSB 7 -#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_LSB 0 -#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_REVISION_REVISION_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_OF_OFEM_RESET */ -#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK 0x00000004 -#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_SHIFT 2 -#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MSB 2 -#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_LSB 2 -#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK 0x00000002 -#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_SHIFT 1 -#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MSB 1 -#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_LSB 1 -#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK 0x00000001 -#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MSB 0 -#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_LSB 0 -#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_OF_OFEM_CNTL */ -#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MASK 0x000000c0 -#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_SHIFT 6 -#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_MSB 7 -#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_LSB 6 -#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_CNTL_TEMP_LED_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK 0x00000030 -#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT 4 -#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MSB 5 -#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_LSB 4 -#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MASK 0x0000000c -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_SHIFT 2 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_MSB 3 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_LSB 2 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_R_LED_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MASK 0x00000003 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_MSB 1 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_LSB 0 -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_CNTL_RS232_L_LED_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_OF_OFEM_MAC_FLOW_CTL */ -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MASK 0x00000100 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_SHIFT 8 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_MSB 8 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_LSB 8 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_LOCH_APS_SEL_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK 0x00000010 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT 4 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB 4 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB 4 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK 0x0000000f -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB 3 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB 0 -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_OF_OFEM_INTERRUPT */ -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MASK 0x00000100 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_SHIFT 8 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_MSB 8 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_LSB 8 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC_TIMEOUT_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MASK 0x00000080 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_SHIFT 7 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_MSB 7 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_LSB 7 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_A_LOSOUT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MASK 0x00000040 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_SHIFT 6 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_MSB 6 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_LSB 6 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_QK_B_LOSOUT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MASK 0x00000020 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_SHIFT 5 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_MSB 5 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_LSB 5 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_NR_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MASK 0x00000010 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_SHIFT 4 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_MSB 4 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_LSB 4 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_NR_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MASK 0x00000008 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_SHIFT 3 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_MSB 3 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_LSB 3 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_A_INT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MASK 0x00000004 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_SHIFT 2 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_MSB 2 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_LSB 2 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_XFP_B_INT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MASK 0x00000002 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_SHIFT 1 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_MSB 1 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_LSB 1 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC1_INT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MASK 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_MSB 0 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_LSB 0 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MAC0_INT_N_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_OF_OFEM_INTERRUPT_MASK */ -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK 0x00000100 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT 8 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB 8 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB 8 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK 0x00000080 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT 7 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB 7 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB 7 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK 0x00000040 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT 6 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB 6 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB 6 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK 0x00000020 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT 5 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB 5 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB 5 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK 0x00000010 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT 4 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB 4 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB 4 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK 0x00000008 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT 3 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB 3 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB 3 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK 0x00000004 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT 2 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB 2 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB 2 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK 0x00000002 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT 1 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB 1 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB 1 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK 0x00000001 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB 0 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB 0 -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT 0x00000001 - -/* ================================================================ - * Field info for register KA_OF_OFEM_SCRATCH */ -#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_MSB 31 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_LSB 0 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_SCRATCH_TEST_BITS_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_OF_OFEM_SCRATCH_MASK */ -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0 -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_OF_OFEM_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff - -#endif /* matches #ifndef HAL_KA_OF_AUTO_H */ diff --git a/board/sandburst/karef/hal_ka_sc_auto.h b/board/sandburst/karef/hal_ka_sc_auto.h deleted file mode 100644 index db1cec2..0000000 --- a/board/sandburst/karef/hal_ka_sc_auto.h +++ /dev/null @@ -1,836 +0,0 @@ -/* **************************************************************** - * Common defs for reg spec for chip ka_sc - * Auto-generated by trex2: DO NOT HAND-EDIT!! - * **************************************************************** - */ - -#ifndef HAL_KA_SC_AUTO_H -#define HAL_KA_SC_AUTO_H - - -/* ---------------------------------------------------------------- - * For block: 'scan' - */ - -/* ---- Block instance addressing (for block-select) */ -#define SCAN_BLOCK_ADDR_BIT_L 7 -#define SCAN_BLOCK_ADDR_BIT_H 9 -#define SCAN_BLOCK_ADDR_WIDTH 3 - -#define SCAN_ADDR 0x0 - -/* ---- Reg addressing (within block) */ -#define SCAN_REG_ADDR_BIT_L 2 -#define SCAN_REG_ADDR_BIT_H 6 -#define SCAN_REG_ADDR_WIDTH 5 - - -/* ================================================================ - * ---- Register KA_SC_SCAN_REVISION */ -#define SAND_HAL_KA_SC_SCAN_REVISION_OFFSET 0x000 -#ifndef SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_REVISION_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_REVISION_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_REVISION_MSB 31 -#define SAND_HAL_KA_SC_SCAN_REVISION_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_RESET */ -#define SAND_HAL_KA_SC_SCAN_RESET_OFFSET 0x004 -#ifndef SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_RESET_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_RESET_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_RESET_MSB 31 -#define SAND_HAL_KA_SC_SCAN_RESET_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_STATUS */ -#define SAND_HAL_KA_SC_SCAN_STATUS_OFFSET 0x008 -#ifndef SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_STATUS_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_STATUS_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_STATUS_MSB 31 -#define SAND_HAL_KA_SC_SCAN_STATUS_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_CNTL */ -#define SAND_HAL_KA_SC_SCAN_CNTL_OFFSET 0x01c -#ifndef SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_CNTL_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_CNTL_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_CNTL_MSB 31 -#define SAND_HAL_KA_SC_SCAN_CNTL_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_BRD_INFO */ -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_OFFSET 0x020 -#ifndef SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_MSB 31 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SCAN_FROM_0 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_OFFSET 0x024 -#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SCAN_FROM_1 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_OFFSET 0x028 -#ifndef SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SCAN_TO_0 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_OFFSET 0x02c -#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SCAN_TO_1 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_OFFSET 0x030 -#ifndef SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SCAN_CTRL */ -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_OFFSET 0x034 -#ifndef SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_PLL_CTRL */ -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_OFFSET 0x038 -#ifndef SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_MSB 31 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_CORE_CLK_COUNT */ -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_OFFSET 0x03c -#ifndef SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_MSB 31 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_DR_CLK_COUNT */ -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_OFFSET 0x040 -#ifndef SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_MSB 31 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SPI_CLK_COUNT */ -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_OFFSET 0x044 -#ifndef SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_BRD_BRD_OUT_DATA */ -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_OFFSET 0x048 -#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_MSB 31 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */ -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_OFFSET 0x04c -#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_MSB 31 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_BRD_BRD_IN */ -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_OFFSET 0x050 -#ifndef SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_MSB 31 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_MISC */ -#define SAND_HAL_KA_SC_SCAN_MISC_OFFSET 0x054 -#ifndef SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_MISC_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_MISC_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_MISC_MSB 31 -#define SAND_HAL_KA_SC_SCAN_MISC_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_INTERRUPT */ -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OFFSET 0x00c -#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MSB 31 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_INTERRUPT_MASK */ -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OFFSET 0x010 -#ifndef SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_MSB 31 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SCRATCH */ -#define SAND_HAL_KA_SC_SCAN_SCRATCH_OFFSET 0x014 -#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SCRATCH_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_LSB 0 - -/* ================================================================ - * ---- Register KA_SC_SCAN_SCRATCH_MASK */ -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_OFFSET 0x018 -#ifndef SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_LSB 0 - -/* ================================================================ - * Field info for register KA_SC_SCAN_REVISION */ -#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK 0x0000ff00 -#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT 8 -#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MSB 15 -#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_LSB 8 -#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_DEFAULT 0x00000023 -#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK 0x000000ff -#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MSB 7 -#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_LSB 0 -#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_REVISION_REVISION_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_RESET */ -#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK 0x00000200 -#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_SHIFT 9 -#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MSB 9 -#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_LSB 9 -#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK 0x00000100 -#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_SHIFT 8 -#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MSB 8 -#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_LSB 8 -#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK 0x00000080 -#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_SHIFT 7 -#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MSB 7 -#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_LSB 7 -#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK 0x00000040 -#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_SHIFT 6 -#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MSB 6 -#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_LSB 6 -#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK 0x00000020 -#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_SHIFT 5 -#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MSB 5 -#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_LSB 5 -#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK 0x00000010 -#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_SHIFT 4 -#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MSB 4 -#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_LSB 4 -#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK 0x00000008 -#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_SHIFT 3 -#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MSB 3 -#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_LSB 3 -#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK 0x00000002 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_SHIFT 1 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MSB 1 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_LSB 1 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK 0x00000001 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MSB 0 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_LSB 0 -#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_STATUS */ -#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MASK 0x00000040 -#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_SHIFT 6 -#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_MSB 6 -#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_LSB 6 -#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_STATUS_SPI_LOCK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MASK 0x00000020 -#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_SHIFT 5 -#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_MSB 5 -#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_LSB 5 -#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_STATUS_DR_LOCK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MASK 0x00000010 -#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_SHIFT 4 -#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_MSB 4 -#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_LSB 4 -#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_STATUS_CORE_LOCK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MASK 0x00000008 -#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_SHIFT 3 -#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_MSB 3 -#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_LSB 3 -#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_STATUS_OFEM_DONE_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MASK 0x00000004 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_SHIFT 2 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_MSB 2 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_LSB 2 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_A_PRES_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MASK 0x00000002 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_SHIFT 1 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_MSB 1 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_LSB 1 -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_STATUS_PS_B_PRES_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MASK 0x00000001 -#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_MSB 0 -#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_LSB 0 -#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_STATUS_ALL_GOOD_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_CNTL */ -#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MASK 0x00000400 -#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_SHIFT 10 -#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_MSB 10 -#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_LSB 10 -#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CNTL_SW_PWR_DOWN_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MASK 0x00000200 -#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_SHIFT 9 -#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_MSB 9 -#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_LSB 9 -#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CNTL_CORE_CLK_50_EN_DEFAULT 0x00000001 -#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MASK 0x00000100 -#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_SHIFT 8 -#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_MSB 8 -#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_LSB 8 -#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CNTL_PCI_CLK_EN_DEFAULT 0x00000001 -#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MASK 0x000000c0 -#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_SHIFT 6 -#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_MSB 7 -#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_LSB 6 -#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CNTL_TEMP_LED_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK 0x00000030 -#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT 4 -#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MSB 5 -#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_LSB 4 -#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MASK 0x0000000c -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_SHIFT 2 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_MSB 3 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_LSB 2 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_R_LED_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MASK 0x00000003 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_MSB 1 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_LSB 0 -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CNTL_RS232_L_LED_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_BRD_INFO */ -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK 0x0000f000 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT 12 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MSB 15 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_LSB 12 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK 0x00000300 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT 8 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MSB 9 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_LSB 8 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK 0x000000f0 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT 4 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MSB 7 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_LSB 4 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK 0x00000003 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MSB 1 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_LSB 0 -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SCAN_FROM_0 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_0_SCAN_OUT_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SCAN_FROM_1 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_SCAN_FROM_1_SCAN_OUT_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SCAN_TO_0 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_0_SCAN_IN_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SCAN_TO_1 */ -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_TO_1_SCAN_IN_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SCAN_CTRL */ -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MASK 0x04000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_SHIFT 26 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_MSB 26 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_LSB 26 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCI_SEL_BM_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MASK 0x03000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_SHIFT 24 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_MSB 25 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_LSB 24 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_TEST_MODE_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MASK 0x00100000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_SHIFT 20 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_MSB 20 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_LSB 20 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_TEST_EN_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MASK 0x00080000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_SHIFT 19 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_MSB 19 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_LSB 19 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PO_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MASK 0x00040000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_SHIFT 18 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_MSB 18 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_LSB 18 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_PI_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MASK 0x00020000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_SHIFT 17 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_MSB 17 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_LSB 17 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_CLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MASK 0x00010000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_SHIFT 16 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_MSB 16 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_LSB 16 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_KA_SCAN_EN_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MASK 0x00001000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_SHIFT 12 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_MSB 12 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_LSB 12 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_ENABLE_DRIVERS_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MASK 0x00000800 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SHIFT 11 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_MSB 11 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_LSB 11 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MASK 0x00000400 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SHIFT 10 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_MSB 10 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_LSB 10 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MASK 0x00000200 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SHIFT 9 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_MSB 9 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_LSB 9 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MASK 0x00000100 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SHIFT 8 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_MSB 8 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_LSB 8 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MASK 0x00000018 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_SHIFT 3 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_MSB 4 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_LSB 3 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_REF_CLK_SEL_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MASK 0x00000004 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_SHIFT 2 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_MSB 2 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_LSB 2 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_SPI_CLK_SEL_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MASK 0x00000002 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_SHIFT 1 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_MSB 1 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_LSB 1 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_DR_CLK_SEL_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MASK 0x00000001 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_MSB 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCAN_CTRL_CORE_CLK_SEL_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_PLL_CTRL */ -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MASK 0x00002000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_SHIFT 13 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_MSB 13 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_LSB 13 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RIPPLE_RESET_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MASK 0x00001000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_SHIFT 12 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_MSB 12 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_LSB 12 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_RESET_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MASK 0x00000800 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_SHIFT 11 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_MSB 11 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_LSB 11 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_BYPASS_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MASK 0x00000400 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_SHIFT 10 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_MSB 10 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_LSB 10 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_ACBYPASS_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MASK 0x00000200 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_SHIFT 9 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_MSB 9 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_LSB 9 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_SPI_EXTCLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MASK 0x00000100 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_SHIFT 8 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_MSB 8 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_LSB 8 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_BYPASS_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MASK 0x00000080 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_SHIFT 7 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_MSB 7 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_LSB 7 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_ACBYPASS_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MASK 0x00000040 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_SHIFT 6 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_MSB 6 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_LSB 6 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_DR_EXTCLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MASK 0x00000020 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_SHIFT 5 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_MSB 5 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_LSB 5 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_BYPASS_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MASK 0x00000010 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_SHIFT 4 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_MSB 4 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_LSB 4 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_ACBYPASS_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MASK 0x00000008 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_SHIFT 3 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_MSB 3 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_LSB 3 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_EXTCLK_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MASK 0x00000007 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_MSB 2 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_LSB 0 -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_PLL_CTRL_KA_PLL_CORE_M_N_SEL_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_CORE_CLK_COUNT */ -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_MSB 23 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_CORE_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_DR_CLK_COUNT */ -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_MSB 23 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_DR_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SPI_CLK_COUNT */ -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MASK 0x02000000 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_SHIFT 25 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_MSB 25 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_LSB 25 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_CLEAR_RIPPLE_CNT_N_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MASK 0x01000000 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_SHIFT 24 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_MSB 24 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_LSB 24 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_ENABLE_RIPPLE_CNT_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MASK 0x00ffffff -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_MSB 23 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_SPI_CLK_COUNT_RIPPLE_COUNT_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_BRD_BRD_OUT_DATA */ -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MASK 0x001fffff -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_MSB 20 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_DATA_BRD_OUT_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_BRD_BRD_OUT_ENABLE */ -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MASK 0x001fffff -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_MSB 20 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_LSB 0 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_OUT_ENABLE_BRD_OUT_EN_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_BRD_BRD_IN */ -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MASK 0x001fffff -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_MSB 20 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_LSB 0 -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_BRD_BRD_IN_BRD_IN_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_MISC */ -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MASK 0x00000002 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_SHIFT 1 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_MSB 1 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_LSB 1 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_START_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MASK 0x00000001 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_MSB 0 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_LSB 0 -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_MISC_MARG_READY_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_INTERRUPT */ -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MASK 0x00000010 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_SHIFT 4 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_MSB 4 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_LSB 4 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_BME_TIMEOUT_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MASK 0x00000008 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_SHIFT 3 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_MSB 3 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_LSB 3 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_A_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MASK 0x00000004 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_SHIFT 2 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_MSB 2 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_LSB 2 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_OVER_TEMP_B_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MASK 0x00000002 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_SHIFT 1 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_MSB 1 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_LSB 1 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_A_DEFAULT 0x00000000 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MASK 0x00000001 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_MSB 0 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_LSB 0 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_POWER_FAIL_B_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_INTERRUPT_MASK */ -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK 0x00000010 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT 4 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB 4 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB 4 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK 0x00000008 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT 3 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB 3 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB 3 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK 0x00000004 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT 2 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB 2 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB 2 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK 0x00000002 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT 1 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB 1 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB 1 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK 0x00000001 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB 0 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT 0x00000001 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SCRATCH */ -#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCRATCH_TEST_BITS_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register KA_SC_SCAN_SCRATCH_MASK */ -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0 -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_KA_SC_SCAN_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff - -#endif /* matches #ifndef HAL_KA_SC_AUTO_H */ diff --git a/board/sandburst/karef/init.S b/board/sandburst/karef/init.S deleted file mode 100644 index 61c5d07..0000000 --- a/board/sandburst/karef/init.S +++ /dev/null @@ -1,39 +0,0 @@ -/* -* Copyright (C) 2005 Sandburst Corporation - * SPDX-License-Identifier: GPL-2.0+ -*/ -/* - * Ported from Ebony init.S by Travis B. Sawyer - */ - -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) - tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) - tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_IG) - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG ) - tlbtab_end diff --git a/board/sandburst/karef/karef.c b/board/sandburst/karef/karef.c deleted file mode 100644 index 96d7dcd..0000000 --- a/board/sandburst/karef/karef.c +++ /dev/null @@ -1,595 +0,0 @@ -/* - * Copyright (C) 2005 Sandburst Corporation - * Travis B. Sawyer - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -#include <config.h> -#include <common.h> -#include <command.h> -#include "karef.h" -#include "karef_version.h" -#include <timestamp.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <i2c.h> -#include "../common/sb_common.h" -#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \ - defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) -#include <net.h> -#endif - -void fpga_init (void); - -KAREF_BOARD_ID_ST board_id_as[] = -{ - {"Undefined"}, /* Not specified */ - {"Kamino Reference Design"}, - {"Reserved"}, /* Reserved for future use */ - {"Reserved"}, /* Reserved for future use */ -}; - -KAREF_BOARD_ID_ST ofem_board_id_as[] = -{ - {"Undefined"}, - {"1x10 + 10x2"}, - {"Reserved"}, - {"Reserved"}, -}; - -/************************************************************************* - * board_early_init_f - * - * Setup chip selects, initialize the Opto-FPGA, initialize - * interrupt polarity and triggers. - ************************************************************************/ -int board_early_init_f (void) -{ - ppc440_gpio_regs_t *gpio_regs; - - /* Enable GPIO interrupts */ - mtsdr(SDR0_PFC0, 0x00103E00); - - /* Setup access for LEDs, and system topology info */ - gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; - gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS; - gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS; - - /* Turn on all the leds for now */ - gpio_regs->out = SBCOMMON_GPIO_LEDS; - - /*--------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------*/ - mtebc(EBC0_CFG, - EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | - EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | - EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | - EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | - EBC_CFG_PR_32); - - /*--------------------------------------------------------------------+ - | 1/2 MB FLASH. Initialize bank 0 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB0AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); - /*--------------------------------------------------------------------+ - | 8KB NVRAM/RTC. Initialize bank 1 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB1AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); - - /*--------------------------------------------------------------------+ - | Compact Flash, uses 2 Chip Selects (2 & 6) - +-------------------------------------------------------------------*/ - mtebc(PB2AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); - - /*--------------------------------------------------------------------+ - | KaRef Scan FPGA. Initialize bank 3 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB5AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48200000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - | MAC A & B for Kamino. OFEM FPGA decodes the addresses - | Initialize bank 4 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB4AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) | - EBC_BXCR_BS_2MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - | OFEM FPGA Initialize bank 5 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB3AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - - mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48400000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - - /*--------------------------------------------------------------------+ - | Compact Flash, uses 2 Chip Selects (2 & 6) - +-------------------------------------------------------------------*/ - mtebc(PB6AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); - - /*--------------------------------------------------------------------+ - | BME-32. Initialize bank 7 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB7AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - * Setup the interrupt controller polarities, triggers, etc. - +-------------------------------------------------------------------*/ - /* - * Because of the interrupt handling rework to handle 440GX interrupts - * with the common code, we needed to change names of the UIC registers. - * Here the new relationship: - * - * U-Boot name 440GX name - * ----------------------- - * UIC0 UICB0 - * UIC1 UIC0 - * UIC2 UIC1 - * UIC3 UIC2 - */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (UIC1ER, 0x00000000); /* disable all */ - mtdcr (UIC1CR, 0x00000000); /* all non- critical */ - mtdcr (UIC1PR, 0xfffffe03); /* polarity */ - mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */ - mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (UIC2ER, 0x00000000); /* disable all */ - mtdcr (UIC2CR, 0x00000000); /* all non-critical */ - mtdcr (UIC2PR, 0xffffc8ff); /* polarity */ - mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */ - mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (UIC3ER, 0x00000000); /* disable all */ - mtdcr (UIC3CR, 0x00000000); /* all non-critical */ - mtdcr (UIC3PR, 0xffff83ff); /* polarity */ - mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */ - mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - - mtdcr (UIC0SR, 0xfc000000); /* clear all */ - mtdcr (UIC0ER, 0x00000000); /* disable all */ - mtdcr (UIC0CR, 0x00000000); /* all non-critical */ - mtdcr (UIC0PR, 0xfc000000); - mtdcr (UIC0TR, 0x00000000); - mtdcr (UIC0VR, 0x00000001); - - fpga_init(); - - return 0; -} - - -/************************************************************************* - * checkboard - * - * Dump pertinent info to the console - ************************************************************************/ -int checkboard (void) -{ - sys_info_t sysinfo; - unsigned char brd_rev, brd_id; - unsigned short sernum; - unsigned char scan_rev, scan_id, ofem_rev=0, ofem_id=0; - unsigned char ofem_brd_rev, ofem_brd_id; - KAREF_FPGA_REGS_ST *karef_ps; - OFEM_FPGA_REGS_ST *ofem_ps; - - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; - - scan_id = (unsigned char)((karef_ps->revision_ul & - SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_MASK) - >> SAND_HAL_KA_SC_SCAN_REVISION_IDENTIFICATION_SHIFT); - - scan_rev = (unsigned char)((karef_ps->revision_ul & SAND_HAL_KA_SC_SCAN_REVISION_REVISION_MASK) - >> SAND_HAL_KA_SC_SCAN_REVISION_REVISION_SHIFT); - - brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_REV_SHIFT); - - brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_BRD_ID_SHIFT); - - ofem_brd_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT); - - ofem_brd_rev = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_REV_SHIFT); - - if (0xF != ofem_brd_id) { - ofem_id = (unsigned char)((ofem_ps->revision_ul & - SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_MASK) - >> SAND_HAL_KA_OF_OFEM_REVISION_IDENTIFICATION_SHIFT); - - ofem_rev = (unsigned char)((ofem_ps->revision_ul & - SAND_HAL_KA_OF_OFEM_REVISION_REVISION_MASK) - >> SAND_HAL_KA_OF_OFEM_REVISION_REVISION_SHIFT); - } - - get_sys_info (&sysinfo); - - sernum = sbcommon_get_serial_number(); - - printf ("Board: Sandburst Corporation Kamino Reference Design " - "Serial Number: %d\n", sernum); - printf ("%s\n", KAREF_U_BOOT_REL_STR); - - printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER); - if (sbcommon_get_master()) { - printf("Slot 0 - Master\nSlave board"); - if (sbcommon_secondary_present()) - printf(" present\n"); - else - printf(" not detected\n"); - } else { - printf("Slot 1 - Slave\n\n"); - } - - printf ("ScanFPGA ID:\t0x%02X\tRev: 0x%02X\n", scan_id, scan_rev); - printf ("Board Rev:\t0x%02X\tID: 0x%02X\n", brd_rev, brd_id); - if(0xF != ofem_brd_id) { - printf("OFemFPGA ID:\t0x%02X\tRev: 0x%02X\n", ofem_id, ofem_rev); - printf("OFEM Board Rev:\t0x%02X\tID: 0x%02X\n", ofem_brd_id, ofem_brd_rev); - } - - /* Fix the ack in the bme 32 */ - udelay(5000); - out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001); - asm("eieio"); - - - return (0); -} - -/************************************************************************* - * misc_init_f - * - * Initialize I2C bus one to gain access to the fans - ************************************************************************/ -int misc_init_f (void) -{ - /* Turn on fans 3 & 4 */ - sbcommon_fans(); - - return (0); -} - -/************************************************************************* - * misc_init_r - * - * Do nothing. - ************************************************************************/ -int misc_init_r (void) -{ - unsigned short sernum; - char envstr[255]; - uchar enetaddr[6]; - KAREF_FPGA_REGS_ST *karef_ps; - OFEM_FPGA_REGS_ST *ofem_ps; - - if(NULL != getenv("secondserial")) { - puts("secondserial is set, switching to second serial port\n"); - setenv("stderr", "serial1"); - setenv("stdout", "serial1"); - setenv("stdin", "serial1"); - } - - setenv("ubrelver", KAREF_U_BOOT_REL_STR); - - memset(envstr, 0, 255); - sprintf (envstr, "Built %s %s by %s", - U_BOOT_DATE, U_BOOT_TIME, BUILDUSER); - setenv("bldstr", envstr); - saveenv(); - - if( getenv("autorecover")) { - setenv("autorecover", NULL); - saveenv(); - sernum = sbcommon_get_serial_number(); - - printf("\nSetting up environment for automatic filesystem recovery\n"); - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 " - "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33", - sernum, sernum); - setenv("bootargs", envstr); - - /* - * Setup Default boot command - */ - setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;" - "fatload ide 0 8100000 pramdisk;" - "bootm 8000000 8100000"); - - printf("Done. Please type allow the system to continue to boot\n"); - } - - if( getenv("fakeled")) { - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; - ofem_ps->control_ul &= ~SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_MASK; - karef_ps->control_ul &= ~SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_MASK; - setenv("bootdelay", "-1"); - saveenv(); - printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n"); - } - -#ifdef CONFIG_HAS_ETH0 - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(0, enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH1 - if (!eth_getenv_enetaddr("eth1addr", enetaddr)) { - board_get_enetaddr(1, enetaddr); - eth_setenv_enetaddr("eth1addr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH2 - if (!eth_getenv_enetaddr("eth2addr", enetaddr)) { - board_get_enetaddr(2, enetaddr); - eth_setenv_enetaddr("eth2addr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH3 - if (!eth_getenv_enetaddr("eth3addr", enetaddr)) { - board_get_enetaddr(3, enetaddr); - eth_setenv_enetaddr("eth3addr", enetaddr); - } -#endif - - return (0); -} - -/************************************************************************* - * ide_set_reset - ************************************************************************/ -#ifdef CONFIG_IDE_RESET -void ide_set_reset(int on) -{ - KAREF_FPGA_REGS_ST *karef_ps; - /* TODO: ide reset */ - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - - if (on) { - karef_ps->reset_ul &= ~SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK; - } else { - karef_ps->reset_ul |= SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK; - } -} -#endif /* CONFIG_IDE_RESET */ - -/************************************************************************* - * fpga_init - ************************************************************************/ -void fpga_init(void) -{ - KAREF_FPGA_REGS_ST *karef_ps; - OFEM_FPGA_REGS_ST *ofem_ps; - unsigned char ofem_id; - unsigned long tmp; - - /* Ensure we have power all around */ - udelay(500); - - karef_ps = (KAREF_FPGA_REGS_ST *)CONFIG_SYS_KAREF_FPGA_BASE; - tmp = - SAND_HAL_KA_SC_SCAN_RESET_CF_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_BME_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_KA_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_SLAVE_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_OFEM_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_IFE_A_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_I2C_MUX1_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_PHY0_RESET_N_MASK | - SAND_HAL_KA_SC_SCAN_RESET_PHY1_RESET_N_MASK; - - karef_ps->reset_ul = tmp; - - /* - * Wait a bit to allow the ofem fpga to get its brains - */ - udelay(5000); - - /* - * Check to see if the ofem is there - */ - ofem_id = (unsigned char)((karef_ps->boardinfo_ul & SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_MASK) - >> SAND_HAL_KA_SC_SCAN_BRD_INFO_FEM_ID_SHIFT); - if(0xF != ofem_id) { - tmp = - SAND_HAL_KA_OF_OFEM_RESET_I2C_MUX0_RESET_N_MASK | - SAND_HAL_KA_OF_OFEM_RESET_LOCH0_RESET_N_MASK | - SAND_HAL_KA_OF_OFEM_RESET_MAC0_RESET_N_MASK; - - ofem_ps = (OFEM_FPGA_REGS_ST *)CONFIG_SYS_OFEM_FPGA_BASE; - ofem_ps->reset_ul = tmp; - - ofem_ps->control_ul |= 1 < SAND_HAL_KA_OF_OFEM_CNTL_FAULT_LED_SHIFT; - } - - karef_ps->control_ul |= 1 << SAND_HAL_KA_SC_SCAN_CNTL_FAULT_LED_SHIFT; - - asm("eieio"); - - return; -} - -int karefSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned short sernum; - char envstr[255]; - - sernum = sbcommon_get_serial_number(); - - memset(envstr, 0, 255); - /* - * Setup our ip address - */ - sprintf(envstr, "10.100.70.%d", sernum); - - setenv("ipaddr", envstr); - /* - * Setup the host ip address - */ - setenv("serverip", "10.100.17.10"); - - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs " - "rw nfsroot=10.100.17.10:/home/metrobox/mbc70.%d " - "nfsaddrs=10.100.70.%d:10.100.17.10:10.100.1.1:" - "255.255.0.0:karef%d.sandburst.com:eth0:none idebus=33", - sernum, sernum, sernum); - - setenv("bootargs_nfs", envstr); - setenv("bootargs", envstr); - - /* - * Setup CF bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 " - "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none idebus=33", - sernum, sernum); - - setenv("bootargs_cf", envstr); - - /* - * Setup Default boot command - */ - setenv("bootcmd_tftp", "tftp 8000000 uImage.karef;bootm 8000000"); - setenv("bootcmd", "tftp 8000000 uImage.karef;bootm 8000000"); - - /* - * Setup compact flash boot command - */ - setenv("bootcmd_cf", "fatload ide 0 8000000 uimage.karef;bootm 8000000"); - - saveenv(); - - return(1); -} - -int karefRecover(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned short sernum; - char envstr[255]; - - sernum = sbcommon_get_serial_number(); - - printf("\nSetting up environment for filesystem recovery\n"); - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 " - "rw ip=10.100.70.%d:::255.255.0.0:karef%d:eth0:none", - sernum, sernum); - setenv("bootargs", envstr); - - /* - * Setup Default boot command - */ - - setenv("bootcmd", "fatload ide 0 8000000 uimage.karef;" - "fatload ide 0 8100000 pramdisk;" - "bootm 8000000 8100000"); - - printf("Done. Please type boot<cr>.\nWhen the kernel has booted" - " please type fsrecover.sh<cr>\n"); - - return(1); -} - -U_BOOT_CMD(kasetup, 1, 1, karefSetupVars, - "Set environment to factory defaults", ""); - -U_BOOT_CMD(karecover, 1, 1, karefRecover, - "Set environment to allow for fs recovery", ""); diff --git a/board/sandburst/karef/karef.h b/board/sandburst/karef/karef.h deleted file mode 100644 index eb9c314..0000000 --- a/board/sandburst/karef/karef.h +++ /dev/null @@ -1,60 +0,0 @@ -#ifndef __KAREF_H__ -#define __KAREF_H__ -/* - * (C) Copyright 2005 - * Sandburst Corporation - * Travis B. Sawyer - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/* Ka Reference Design OFEM FPGA Registers & definitions */ -#include "hal_ka_sc_auto.h" -#include "hal_ka_of_auto.h" - -typedef struct karef_board_id_s { - const char name[40]; -} KAREF_BOARD_ID_ST, *KAREF_BOARD_ID_PST; - -/* SCAN FPGA */ -typedef struct karef_fpga_regs_s -{ - volatile unsigned long revision_ul; /* Read Only */ - volatile unsigned long reset_ul; /* Read/Write */ - volatile unsigned long interrupt_ul; /* Read Only */ - volatile unsigned long mask_ul; /* Read/Write */ - volatile unsigned long scratch_ul; /* Read/Write */ - volatile unsigned long scrmask_ul; /* Read/Write */ - volatile unsigned long status_ul; /* Read Only */ - volatile unsigned long control_ul; /* Read/Write */ - volatile unsigned long boardinfo_ul; /* Read Only */ - volatile unsigned long scan_from0_ul; /* Read Only */ - volatile unsigned long scan_from1_ul; /* Read Only */ - volatile unsigned long scan_to0_ul; /* Read/Write */ - volatile unsigned long scan_to1_ul; /* Read/Write */ - volatile unsigned long scan_control_ul; /* Read/Write */ - volatile unsigned long pll_control_ul; /* Read/Write */ - volatile unsigned long core_clock_cnt_ul; /* Read/Write */ - volatile unsigned long dr_clock_cnt_ul; /* Read/Write */ - volatile unsigned long spi_clock_cnt_ul; /* Read/Write */ - volatile unsigned long brdout_data_ul; /* Read/Write */ - volatile unsigned long brdout_enable_ul; /* Read/Write */ - volatile unsigned long brdin_data_ul; /* Read Only */ - volatile unsigned long misc_ul; /* Read/Write */ -} __attribute__((packed)) KAREF_FPGA_REGS_ST , * KAREF_FPGA_REGS_PST; - -/* OFEM FPGA */ -typedef struct ofem_fpga_regs_s -{ - volatile unsigned long revision_ul; /* Read Only */ - volatile unsigned long reset_ul; /* Read/Write */ - volatile unsigned long interrupt_ul; /* Read Only */ - volatile unsigned long mask_ul; /* Read/Write */ - volatile unsigned long scratch_ul; /* Read/Write */ - volatile unsigned long scrmask_ul; /* Read/Write */ - volatile unsigned long control_ul; /* Read/Write */ - volatile unsigned long mac_flow_ctrl_ul; /* Read/Write */ -} __attribute__((packed)) OFEM_FPGA_REGS_ST , * OFEM_FPGA_REGS_PST; - - -#endif /* __KAREF_H__ */ diff --git a/board/sandburst/karef/karef_version.h b/board/sandburst/karef/karef_version.h deleted file mode 100644 index 6c6baee..0000000 --- a/board/sandburst/karef/karef_version.h +++ /dev/null @@ -1,10 +0,0 @@ -#ifndef _KAREF_VERSION_H_ -#define _KAREF_VERSION_H_ -/* - * Copyright (C) 2005 Sandburst Corporation - * Travis B. Sawyer - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#define KAREF_U_BOOT_REL_STR "Release 0.0.7" -#endif diff --git a/board/sandburst/karef/u-boot.lds.debug b/board/sandburst/karef/u-boot.lds.debug deleted file mode 100644 index c17c8b9..0000000 --- a/board/sandburst/karef/u-boot.lds.debug +++ /dev/null @@ -1,130 +0,0 @@ -/* - * (C) Copyright 2002-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - board/sandburst/karef/init.o (.text) - arch/powerpc/cpu/ppc4xx/kgdb.o (.text) - arch/powerpc/cpu/ppc4xx/traps.o (.text) - arch/powerpc/cpu/ppc4xx/interrupts.o (.text) - arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text) - arch/powerpc/cpu/ppc4xx/cpu_init.o (.text) - arch/powerpc/cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - lib/zlib.o (.text) - -/* common/env_embedded.o(.text) */ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/board/sandburst/metrobox/Kconfig b/board/sandburst/metrobox/Kconfig deleted file mode 100644 index 4a771ef..0000000 --- a/board/sandburst/metrobox/Kconfig +++ /dev/null @@ -1,12 +0,0 @@ -if TARGET_METROBOX - -config SYS_BOARD - default "metrobox" - -config SYS_VENDOR - default "sandburst" - -config SYS_CONFIG_NAME - default "METROBOX" - -endif diff --git a/board/sandburst/metrobox/MAINTAINERS b/board/sandburst/metrobox/MAINTAINERS deleted file mode 100644 index 71d18f9..0000000 --- a/board/sandburst/metrobox/MAINTAINERS +++ /dev/null @@ -1,6 +0,0 @@ -METROBOX BOARD -#M: Travis Sawyer travis.sawyer@sandburst.com -S: Orphan (since 2014-03) -F: board/sandburst/metrobox/ -F: include/configs/METROBOX.h -F: configs/METROBOX_defconfig diff --git a/board/sandburst/metrobox/Makefile b/board/sandburst/metrobox/Makefile deleted file mode 100644 index 2c1028b..0000000 --- a/board/sandburst/metrobox/Makefile +++ /dev/null @@ -1,15 +0,0 @@ -# -# (C) Copyright 2006 -# Wolfgang Denk, DENX Software Engineering, wd@denx.de. -# -# (C) Copyright 2005 -# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -# TBS: add for debugging purposes -ccflags-y += -DBUILDUSER='"$(shell whoami)"' - -obj-y = metrobox.o ../common/flash.o ../common/sb_common.o -extra-y += init.o diff --git a/board/sandburst/metrobox/config.mk b/board/sandburst/metrobox/config.mk deleted file mode 100644 index 23190c8..0000000 --- a/board/sandburst/metrobox/config.mk +++ /dev/null @@ -1,16 +0,0 @@ -# -# (C) Copyright 2005 -# Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com -# -# SPDX-License-Identifier: GPL-2.0+ -# - -PLATFORM_CPPFLAGS += -DCONFIG_440=1 - -ifeq ($(debug),1) -PLATFORM_CPPFLAGS += -DDEBUG -endif - -ifeq ($(dbcr),1) -PLATFORM_CPPFLAGS += -DCONFIG_SYS_INIT_DBCR=0x8cff0000 -endif diff --git a/board/sandburst/metrobox/hal_xc_auto.h b/board/sandburst/metrobox/hal_xc_auto.h deleted file mode 100644 index c99b38c..0000000 --- a/board/sandburst/metrobox/hal_xc_auto.h +++ /dev/null @@ -1,553 +0,0 @@ -/* **************************************************************** - * Common defs for reg spec for chip xc - * Auto-generated by trex2: DO NOT HAND-EDIT!! - * **************************************************************** - */ - -#ifndef HAL_XC_AUTO_H -#define HAL_XC_AUTO_H - -/* ---------------------------------------------------------------- - * For block: 'xcvr_cntl' - */ - -/* ---- Block instance addressing (for block-select) */ -#define XCVR_CNTL_BLOCK_ADDR_BIT_L 6 -#define XCVR_CNTL_BLOCK_ADDR_BIT_H 9 -#define XCVR_CNTL_BLOCK_ADDR_WIDTH 4 - -#define XCVR_CNTL_ADDR 0x0 - -/* ---- Reg addressing (within block) */ -#define XCVR_CNTL_REG_ADDR_BIT_L 2 -#define XCVR_CNTL_REG_ADDR_BIT_H 5 -#define XCVR_CNTL_REG_ADDR_WIDTH 4 - - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_REVISION */ -#define SAND_HAL_XC_XCVR_CNTL_REVISION_OFFSET 0x000 -#ifndef SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_REVISION_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_REVISION_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_REVISION_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_RESET */ -#define SAND_HAL_XC_XCVR_CNTL_RESET_OFFSET 0x004 -#ifndef SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_RESET_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_RESET_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_RESET_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_STATUS */ -#define SAND_HAL_XC_XCVR_CNTL_STATUS_OFFSET 0x008 -#ifndef SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_STATUS_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_STATUS_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_STATUS_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_CNTL */ -#define SAND_HAL_XC_XCVR_CNTL_CNTL_OFFSET 0x01c -#ifndef SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_CNTL_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_CNTL_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_CNTL_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_BRD_INFO */ -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_OFFSET 0x020 -#ifndef SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_MAC_FLOW_CTL */ -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_OFFSET 0x024 -#ifndef SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_INTERRUPT */ -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OFFSET 0x00c -#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_INTERRUPT_MASK */ -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OFFSET 0x010 -#ifndef SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_SCRATCH */ -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_OFFSET 0x014 -#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_LSB 0 - -/* ================================================================ - * ---- Register XC_XCVR_CNTL_SCRATCH_MASK */ -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_OFFSET 0x018 -#ifndef SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_NO_TEST_MASK 0x000 -#endif -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_LSB 0 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_REVISION */ -#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK 0x0000ff00 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT 8 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MSB 15 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_LSB 8 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK 0x000000ff -#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MSB 7 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_RESET */ -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK 0x00020000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_SHIFT 17 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MSB 17 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_LSB 17 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK 0x00010000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_SHIFT 16 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MSB 16 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_LSB 16 -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK 0x00008000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_SHIFT 15 -#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MSB 15 -#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_LSB 15 -#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK 0x00004000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_SHIFT 14 -#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MSB 14 -#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_LSB 14 -#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK 0x00002000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_SHIFT 13 -#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MSB 13 -#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_LSB 13 -#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK 0x00001000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_SHIFT 12 -#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MSB 12 -#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_LSB 12 -#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK 0x00000800 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_SHIFT 11 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MSB 11 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_LSB 11 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK 0x00000400 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_SHIFT 10 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MSB 10 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_LSB 10 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK 0x00000200 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_SHIFT 9 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MSB 9 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_LSB 9 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK 0x00000100 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_SHIFT 8 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MSB 8 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_LSB 8 -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK 0x00000080 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_SHIFT 7 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MSB 7 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_LSB 7 -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK 0x00000040 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_SHIFT 6 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MSB 6 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_LSB 6 -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK 0x00000020 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_SHIFT 5 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MSB 5 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_LSB 5 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK 0x00000010 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_SHIFT 4 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MSB 4 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_LSB 4 -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK 0x00000008 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_SHIFT 3 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MSB 3 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_LSB 3 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK 0x00000004 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_SHIFT 2 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MSB 2 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_LSB 2 -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK 0x00000002 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_SHIFT 1 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MSB 1 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_LSB 1 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MSB 0 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_STATUS */ -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MASK 0x00000004 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_SHIFT 2 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_MSB 2 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_LSB 2 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_A_PRES_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MASK 0x00000002 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_SHIFT 1 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_MSB 1 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_LSB 1 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_STATUS_PS_B_PRES_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MASK 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_MSB 0 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_STATUS_ALL_GOOD_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_CNTL */ -#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MASK 0x00000400 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_SHIFT 10 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_MSB 10 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_LSB 10 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_CNTL_SW_PWR_DOWN_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MASK 0x00000300 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_SHIFT 8 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_MSB 9 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_LSB 8 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_CNTL_OVER_TEMP_LED_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK 0x000000c0 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT 6 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MSB 7 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_LSB 6 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MASK 0x00000030 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_SHIFT 4 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_MSB 5 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_LSB 4 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_R_LED_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MASK 0x0000000c -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_SHIFT 2 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_MSB 3 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_LSB 2 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_CNTL_RS232_L_LED_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MASK 0x00000002 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_SHIFT 1 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_MSB 1 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_LSB 1 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_CNTL_CORE_CLK_50_EN_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MASK 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_MSB 0 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_CNTL_PCI_CLK_EN_DEFAULT 0x00000001 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_BRD_INFO */ -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK 0x000000f0 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT 4 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MSB 7 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_LSB 4 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK 0x00000003 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MSB 1 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_MAC_FLOW_CTL */ -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MASK 0x00001000 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_SHIFT 12 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_MSB 12 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_LSB 12 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_FR_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MASK 0x00000f00 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_SHIFT 8 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_MSB 11 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_LSB 8 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACB_TXPAUSE_ADDR_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MASK 0x00000010 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_SHIFT 4 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_MSB 4 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_LSB 4 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_FR_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MASK 0x0000000f -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_MSB 3 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_MAC_FLOW_CTL_MACA_TXPAUSE_ADDR_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_INTERRUPT */ -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MASK 0x00002000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_SHIFT 13 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_MSB 13 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_LSB 13 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_BME_TIMEOUT_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MASK 0x00001000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_SHIFT 12 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_MSB 12 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_LSB 12 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC_TIMEOUT_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MASK 0x00000800 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_SHIFT 11 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_MSB 11 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_LSB 11 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_A_LOSOUT_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MASK 0x00000400 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_SHIFT 10 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_MSB 10 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_LSB 10 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_QK_B_LOSOUT_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MASK 0x00000200 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_SHIFT 9 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_MSB 9 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_LSB 9 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_NR_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MASK 0x00000100 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_SHIFT 8 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_MSB 8 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_LSB 8 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_NR_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MASK 0x00000080 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_SHIFT 7 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_MSB 7 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_LSB 7 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_A_INT_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MASK 0x00000040 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_SHIFT 6 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_MSB 6 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_LSB 6 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_XFP_B_INT_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MASK 0x00000020 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_SHIFT 5 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_MSB 5 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_LSB 5 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_A_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MASK 0x00000010 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_SHIFT 4 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_MSB 4 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_LSB 4 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_OVER_TEMP_B_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MASK 0x00000008 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_SHIFT 3 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_MSB 3 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_LSB 3 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_A_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MASK 0x00000004 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_SHIFT 2 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_MSB 2 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_LSB 2 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_POWER_FAIL_B_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MASK 0x00000002 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_SHIFT 1 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_MSB 1 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_LSB 1 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC1_INT_N_DEFAULT 0x00000000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MASK 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_MSB 0 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_TYPE (SAND_HAL_TYPE_READ) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MAC0_INT_N_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_INTERRUPT_MASK */ -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MASK 0x00002000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_SHIFT 13 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_MSB 13 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_LSB 13 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_BME_TIMEOUT_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MASK 0x00001000 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_SHIFT 12 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_MSB 12 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_LSB 12 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC_TIMEOUT_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MASK 0x00000800 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_SHIFT 11 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_MSB 11 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_LSB 11 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_A_LOSOUT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MASK 0x00000400 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_SHIFT 10 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_MSB 10 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_LSB 10 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_QK_B_LOSOUT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MASK 0x00000200 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_SHIFT 9 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_MSB 9 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_LSB 9 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_NR_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MASK 0x00000100 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_SHIFT 8 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_MSB 8 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_LSB 8 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_NR_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MASK 0x00000080 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_SHIFT 7 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_MSB 7 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_LSB 7 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_A_INT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MASK 0x00000040 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_SHIFT 6 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_MSB 6 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_LSB 6 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_XFP_B_INT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MASK 0x00000020 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_SHIFT 5 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_MSB 5 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_LSB 5 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_A_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MASK 0x00000010 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_SHIFT 4 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_MSB 4 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_LSB 4 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_OVER_TEMP_B_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MASK 0x00000008 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_SHIFT 3 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_MSB 3 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_LSB 3 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_A_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MASK 0x00000004 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_SHIFT 2 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_MSB 2 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_LSB 2 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_POWER_FAIL_B_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MASK 0x00000002 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_SHIFT 1 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_MSB 1 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_LSB 1 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC1_INT_N_DISINT_DEFAULT 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MASK 0x00000001 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_MSB 0 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_INTERRUPT_MASK_MAC0_INT_N_DISINT_DEFAULT 0x00000001 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_SCRATCH */ -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_TEST_BITS_DEFAULT 0x00000000 - -/* ================================================================ - * Field info for register XC_XCVR_CNTL_SCRATCH_MASK */ -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MASK 0xffffffff -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_SHIFT 0 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_MSB 31 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_LSB 0 -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_TYPE (SAND_HAL_TYPE_WRITE) -#define SAND_HAL_XC_XCVR_CNTL_SCRATCH_MASK_TEST_BITS_DISINT_DEFAULT 0xffffffff - -#endif /* matches #ifndef HAL_XC_AUTO_H */ diff --git a/board/sandburst/metrobox/init.S b/board/sandburst/metrobox/init.S deleted file mode 100644 index 13e340e..0000000 --- a/board/sandburst/metrobox/init.S +++ /dev/null @@ -1,37 +0,0 @@ -/* -* Copyright (C) 2005 -* Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * SPDX-License-Identifier: GPL-2.0+ -*/ - -#include <ppc_asm.tmpl> -#include <asm/mmu.h> -#include <config.h> -#include <asm/ppc4xx.h> - -/************************************************************************** - * TLB TABLE - * - * This table is used by the cpu boot code to setup the initial tlb - * entries. Rather than make broad assumptions in the cpu source tree, - * this table lets each board set things up however they like. - * - * Pointer to the table is returned in r1 - * - *************************************************************************/ - - .section .bootpg,"ax" - .globl tlbtab - -tlbtab: - tlbtab_start - tlbentry( 0xf0000000, SZ_256M, 0xf0000000, 1, AC_RWX | SA_IG) - tlbentry( CONFIG_SYS_PERIPHERAL_BASE, SZ_256M, 0x40000000, 1, AC_RW | SA_IG) - tlbentry( CONFIG_SYS_ISRAM_BASE, SZ_256K, 0x80000000, 0, AC_RWX | SA_IG) - tlbentry( CONFIG_SYS_SDRAM_BASE, SZ_256M, 0x00000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_SDRAM_BASE+0x10000000, SZ_256M, 0x10000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_SDRAM_BASE+0x20000000, SZ_256M, 0x20000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_SDRAM_BASE+0x30000000, SZ_256M, 0x30000000, 0, AC_RWX | SA_IG ) - tlbentry( CONFIG_SYS_PCI_BASE, SZ_256M, 0x00000000, 2, AC_RW | SA_IG ) - tlbentry( CONFIG_SYS_PCI_MEMBASE, SZ_256M, 0x00000000, 3, AC_RW | SA_IG ) - tlbtab_end diff --git a/board/sandburst/metrobox/metrobox.c b/board/sandburst/metrobox/metrobox.c deleted file mode 100644 index 290fa02..0000000 --- a/board/sandburst/metrobox/metrobox.c +++ /dev/null @@ -1,561 +0,0 @@ -/* - * Copyright (c) 2005 - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#include <config.h> -#include <common.h> -#include <command.h> -#include "metrobox.h" -#include "metrobox_version.h" -#include <timestamp.h> -#include <asm/processor.h> -#include <asm/io.h> -#include <spd_sdram.h> -#include <i2c.h> -#include "../common/sb_common.h" -#if defined(CONFIG_HAS_ETH0) || defined(CONFIG_HAS_ETH1) || \ - defined(CONFIG_HAS_ETH2) || defined(CONFIG_HAS_ETH3) -#include <net.h> -#endif - -void fpga_init (void); - -METROBOX_BOARD_ID_ST board_id_as[] = -{ {"Undefined"}, /* Not specified */ - {"2x10Gb"}, /* 2 ports, 10 GbE */ - {"20x1Gb"}, /* 20 ports, 1 GbE */ - {"Reserved"}, /* Reserved for future use */ -}; - -/************************************************************************* - * board_early_init_f - * - * Setup chip selects, initialize the Opto-FPGA, initialize - * interrupt polarity and triggers. - ************************************************************************/ -int board_early_init_f (void) -{ - ppc440_gpio_regs_t *gpio_regs; - - /* Enable GPIO interrupts */ - mtsdr(SDR0_PFC0, 0x00103E00); - - /* Setup access for LEDs, and system topology info */ - gpio_regs = (ppc440_gpio_regs_t *)CONFIG_SYS_GPIO_BASE; - gpio_regs->open_drain = SBCOMMON_GPIO_SYS_LEDS; - gpio_regs->tri_state = SBCOMMON_GPIO_DBGLEDS; - - /* Turn on all the leds for now */ - gpio_regs->out = SBCOMMON_GPIO_LEDS; - - /*--------------------------------------------------------------------+ - | Initialize EBC CONFIG - +-------------------------------------------------------------------*/ - mtebc(EBC0_CFG, - EBC_CFG_LE_UNLOCK | EBC_CFG_PTD_ENABLE | - EBC_CFG_RTC_64PERCLK | EBC_CFG_ATC_PREVIOUS | - EBC_CFG_DTC_PREVIOUS | EBC_CFG_CTC_PREVIOUS | - EBC_CFG_EMC_DEFAULT | EBC_CFG_PME_DISABLE | - EBC_CFG_PR_32); - - /*--------------------------------------------------------------------+ - | 1/2 MB FLASH. Initialize bank 0 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB0AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB0CR, EBC_BXCR_BAS_ENCODE(CONFIG_SYS_FLASH_BASE) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); - /*--------------------------------------------------------------------+ - | 8KB NVRAM/RTC. Initialize bank 1 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB1AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(10) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(1)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB1CR, EBC_BXCR_BAS_ENCODE(0x48000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_8BIT); - - /*--------------------------------------------------------------------+ - | Compact Flash, uses 2 Chip Selects (2 & 6) - +-------------------------------------------------------------------*/ - mtebc(PB2AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB2CR, EBC_BXCR_BAS_ENCODE(0xF0000000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); - - /*--------------------------------------------------------------------+ - | OPTO & OFEM FPGA. Initialize bank 3 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB3AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB3CR, EBC_BXCR_BAS_ENCODE(0x48200000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - | MAC A for metrobox - | MAC A & B for Kamino. OFEM FPGA decodes the addresses - | Initialize bank 4 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB4AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB4CR, EBC_BXCR_BAS_ENCODE(0x48600000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - | Metrobox MAC B Initialize bank 5 with default values. - | KA REF FPGA Initialize bank 5 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB5AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB5CR, EBC_BXCR_BAS_ENCODE(0x48700000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - | Compact Flash, uses 2 Chip Selects (2 & 6) - +-------------------------------------------------------------------*/ - mtebc(PB6AP, - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(8) | - EBC_BXAP_BCE_DISABLE | EBC_BXAP_CSN_ENCODE(1) | - EBC_BXAP_OEN_ENCODE(1)| EBC_BXAP_WBN_ENCODE(1) | - EBC_BXAP_WBF_ENCODE(0)| EBC_BXAP_TH_ENCODE(1) | - EBC_BXAP_RE_DISABLED | EBC_BXAP_BEM_WRITEONLY | - EBC_BXAP_PEN_DISABLED); - - mtebc(PB6CR, EBC_BXCR_BAS_ENCODE(0xF0100000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_16BIT); - - /*--------------------------------------------------------------------+ - | BME-32. Initialize bank 7 with default values. - +-------------------------------------------------------------------*/ - mtebc(PB7AP, - EBC_BXAP_RE_ENABLED | EBC_BXAP_SOR_NONDELAYED | - EBC_BXAP_BME_DISABLED | EBC_BXAP_TWT_ENCODE(3) | - EBC_BXAP_TH_ENCODE(1) | EBC_BXAP_WBF_ENCODE(0) | - EBC_BXAP_CSN_ENCODE(1) | EBC_BXAP_PEN_DISABLED | - EBC_BXAP_OEN_ENCODE(1) | EBC_BXAP_BEM_RW); - - mtebc(PB7CR, EBC_BXCR_BAS_ENCODE(0x48500000) | - EBC_BXCR_BS_1MB | EBC_BXCR_BU_RW | EBC_BXCR_BW_32BIT); - - /*--------------------------------------------------------------------+ - * Setup the interrupt controller polarities, triggers, etc. - +-------------------------------------------------------------------*/ - /* - * Because of the interrupt handling rework to handle 440GX interrupts - * with the common code, we needed to change names of the UIC registers. - * Here the new relationship: - * - * U-Boot name 440GX name - * ----------------------- - * UIC0 UICB0 - * UIC1 UIC0 - * UIC2 UIC1 - * UIC3 UIC2 - */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - mtdcr (UIC1ER, 0x00000000); /* disable all */ - mtdcr (UIC1CR, 0x00000000); /* all non- critical */ - mtdcr (UIC1PR, 0xfffffe03); /* polarity */ - mtdcr (UIC1TR, 0x01c00000); /* trigger edge vs level */ - mtdcr (UIC1VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC1SR, 0xffffffff); /* clear all */ - - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - mtdcr (UIC2ER, 0x00000000); /* disable all */ - mtdcr (UIC2CR, 0x00000000); /* all non-critical */ - mtdcr (UIC2PR, 0xffffc8ff); /* polarity */ - mtdcr (UIC2TR, 0x00ff0000); /* trigger edge vs level */ - mtdcr (UIC2VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC2SR, 0xffffffff); /* clear all */ - - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - mtdcr (UIC3ER, 0x00000000); /* disable all */ - mtdcr (UIC3CR, 0x00000000); /* all non-critical */ - mtdcr (UIC3PR, 0xffff83ff); /* polarity */ - mtdcr (UIC3TR, 0x00ff8c0f); /* trigger edge vs level */ - mtdcr (UIC3VR, 0x00000001); /* int31 highest, base=0x000 */ - mtdcr (UIC3SR, 0xffffffff); /* clear all */ - - mtdcr (UIC0SR, 0xfc000000); /* clear all */ - mtdcr (UIC0ER, 0x00000000); /* disable all */ - mtdcr (UIC0CR, 0x00000000); /* all non-critical */ - mtdcr (UIC0PR, 0xfc000000); - mtdcr (UIC0TR, 0x00000000); - mtdcr (UIC0VR, 0x00000001); - - fpga_init(); - - return 0; -} - -/************************************************************************* - * checkboard - * - * Dump pertinent info to the console - ************************************************************************/ -int checkboard (void) -{ - sys_info_t sysinfo; - unsigned char brd_rev, brd_id; - unsigned short sernum; - unsigned char opto_rev, opto_id; - OPTO_FPGA_REGS_ST *opto_ps; - - opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE; - - opto_rev = (unsigned char)((opto_ps->revision_ul & - SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK) - >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT); - - opto_id = (unsigned char)((opto_ps->revision_ul & - SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_MASK) - >> SAND_HAL_XC_XCVR_CNTL_REVISION_IDENTIFICATION_SHIFT); - - brd_rev = (unsigned char)((opto_ps->boardinfo_ul & - SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_MASK) - >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_REV_SHIFT); - - brd_id = (unsigned char)((opto_ps->boardinfo_ul & - SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_MASK) - >> SAND_HAL_XC_XCVR_CNTL_BRD_INFO_BRD_ID_SHIFT); - - get_sys_info (&sysinfo); - - sernum = sbcommon_get_serial_number(); - printf ("Board: Sandburst Corporation MetroBox Serial Number: %d\n", sernum); - printf ("%s\n", METROBOX_U_BOOT_REL_STR); - - printf ("Built %s %s by %s\n", U_BOOT_DATE, U_BOOT_TIME, BUILDUSER); - if (sbcommon_get_master()) { - printf("Slot 0 - Master\nSlave board"); - if (sbcommon_secondary_present()) - printf(" present\n"); - else - printf(" not detected\n"); - } else { - printf("Slot 1 - Slave\n\n"); - } - - printf ("OptoFPGA ID:\t0x%02X\tRev: 0x%02X\n", opto_id, opto_rev); - printf ("Board Rev:\t0x%02X\tID: %s\n", brd_rev, board_id_as[brd_id].name); - - /* Fix the ack in the bme 32 */ - udelay(5000); - out32(CONFIG_SYS_BME32_BASE + 0x0000000C, 0x00000001); - asm("eieio"); - - - return (0); -} - -/************************************************************************* - * misc_init_f - * - * Initialize I2C bus one to gain access to the fans - ************************************************************************/ -int misc_init_f (void) -{ - /* Turn on fans */ - sbcommon_fans(); - - return (0); -} - -/************************************************************************* - * misc_init_r - * - * Do nothing. - ************************************************************************/ -int misc_init_r (void) -{ - unsigned short sernum; - char envstr[255]; - uchar enetaddr[6]; - unsigned char opto_rev; - OPTO_FPGA_REGS_ST *opto_ps; - - opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE; - - if(NULL != getenv("secondserial")) { - puts("secondserial is set, switching to second serial port\n"); - setenv("stderr", "serial1"); - setenv("stdout", "serial1"); - setenv("stdin", "serial1"); - } - - setenv("ubrelver", METROBOX_U_BOOT_REL_STR); - - memset(envstr, 0, 255); - sprintf (envstr, "Built %s %s by %s", - U_BOOT_DATE, U_BOOT_TIME, BUILDUSER); - setenv("bldstr", envstr); - saveenv(); - - if( getenv("autorecover")) { - setenv("autorecover", NULL); - saveenv(); - sernum = sbcommon_get_serial_number(); - - printf("\nSetting up environment for automatic filesystem recovery\n"); - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 " - "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33", - sernum, sernum); - setenv("bootargs", envstr); - - /* - * Setup Default boot command - */ - setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;" - "fatload ide 0 8100000 pramdisk;" - "bootm 8000000 8100000"); - - printf("Done. Please type allow the system to continue to boot\n"); - } - - if( getenv("fakeled")) { - setenv("bootdelay", "-1"); - saveenv(); - printf("fakeled is set. use 'setenv fakeled ; setenv bootdelay 5 ; saveenv' to recover\n"); - opto_rev = (unsigned char)((opto_ps->revision_ul & - SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK) - >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT); - - if(0x12 <= opto_rev) { - opto_ps->control_ul &= ~ SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_MASK; - } - } - -#ifdef CONFIG_HAS_ETH0 - if (!eth_getenv_enetaddr("ethaddr", enetaddr)) { - board_get_enetaddr(0, enetaddr); - eth_setenv_enetaddr("ethaddr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH1 - if (!eth_getenv_enetaddr("eth1addr", enetaddr)) { - board_get_enetaddr(1, enetaddr); - eth_setenv_enetaddr("eth1addr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH2 - if (!eth_getenv_enetaddr("eth2addr", enetaddr)) { - board_get_enetaddr(2, enetaddr); - eth_setenv_enetaddr("eth2addr", enetaddr); - } -#endif - -#ifdef CONFIG_HAS_ETH3 - if (!eth_getenv_enetaddr("eth3addr", enetaddr)) { - board_get_enetaddr(3, enetaddr); - eth_setenv_enetaddr("eth3addr", enetaddr); - } -#endif - - return (0); -} - -/************************************************************************* - * ide_set_reset - ************************************************************************/ -#ifdef CONFIG_IDE_RESET -void ide_set_reset(int on) -{ - OPTO_FPGA_REGS_ST *opto_ps; - opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE; - - if (on) { /* assert RESET */ - opto_ps->reset_ul &= ~SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK; - } else { /* release RESET */ - opto_ps->reset_ul |= SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK; - } -} -#endif /* CONFIG_IDE_RESET */ - -/************************************************************************* - * fpga_init - ************************************************************************/ -void fpga_init(void) -{ - OPTO_FPGA_REGS_ST *opto_ps; - unsigned char opto_rev; - unsigned long tmp; - - /* Ensure we have power all around */ - udelay(500); - - /* - * Take appropriate hw bits out of reset - */ - opto_ps = (OPTO_FPGA_REGS_ST *)CONFIG_SYS_FPGA_BASE; - - tmp = - SAND_HAL_XC_XCVR_CNTL_RESET_MAC1_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_MAC0_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_BME_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_ACE_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_CF_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_QE_A_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_IFE_A_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_EFE_A_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_QE_B_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_IFE_B_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_EFE_B_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_LOCK1_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_LOCK0_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX1_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_I2C_MUX0_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_PHY0_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_PHY1_RESET_N_MASK | - SAND_HAL_XC_XCVR_CNTL_RESET_SLAVE_RESET_N_MASK; - opto_ps->reset_ul = tmp; - /* - * Turn on the 'Slow Blink' for the System Error Led. - * Ensure FPGA rev is up to at least rev 0x12 - */ - opto_rev = (unsigned char)((opto_ps->revision_ul & - SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_MASK) - >> SAND_HAL_XC_XCVR_CNTL_REVISION_REVISION_SHIFT); - if(0x12 <= opto_rev) { - opto_ps->control_ul |= 1 << SAND_HAL_XC_XCVR_CNTL_CNTL_ERROR_LED_SHIFT; - } - - asm("eieio"); - - return; -} - -int metroboxSetupVars(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned short sernum; - char envstr[255]; - - sernum = sbcommon_get_serial_number(); - - memset(envstr, 0, 255); - /* - * Setup our ip address - */ - sprintf(envstr, "10.100.60.%d", sernum); - - setenv("ipaddr", envstr); - /* - * Setup the host ip address - */ - setenv("serverip", "10.100.17.10"); - - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - - sprintf(envstr, "console=ttyS0,9600 root=/dev/nfs " - "rw nfsroot=10.100.17.10:/home/metrobox/mbc%d " - "nfsaddrs=10.100.60.%d:10.100.17.10:10.100.1.1" - ":255.255.0.0:metrobox%d.sandburst.com:eth0:none idebus=33", - sernum, sernum, sernum); - - setenv("bootargs_nfs", envstr); - setenv("bootargs", envstr); - - /* - * Setup CF bootargs - */ - memset(envstr, 0, 255); - sprintf(envstr, "console=ttyS0,9600 root=/dev/hda2 " - "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none idebus=33", - sernum, sernum); - - setenv("bootargs_cf", envstr); - - /* - * Setup Default boot command - */ - setenv("bootcmd_tftp", "tftp 8000000 pImage.metrobox;bootm 8000000"); - setenv("bootcmd", "tftp 8000000 pImage.metrobox;bootm 8000000"); - - /* - * Setup compact flash boot command - */ - setenv("bootcmd_cf", "fatload ide 0 8000000 pimage.metrobox;bootm 8000000"); - - saveenv(); - - - return(1); -} - -int metroboxRecover(cmd_tbl_t *cmdtp, int flag, int argc, char * const argv[]) -{ - unsigned short sernum; - char envstr[255]; - - sernum = sbcommon_get_serial_number(); - - printf("\nSetting up environment for filesystem recovery\n"); - /* - * Setup default bootargs - */ - memset(envstr, 0, 255); - sprintf(envstr, "console=ttyS0,9600 root=/dev/ram0 " - "rw ip=10.100.60.%d:::255.255.0.0:metrobox%d:eth0:none", - sernum, sernum); - - setenv("bootargs", envstr); - - /* - * Setup Default boot command - */ - setenv("bootcmd", "fatload ide 0 8000000 pimage.metrobox;" - "fatload ide 0 8100000 pramdisk;" - "bootm 8000000 8100000"); - - printf("Done. Please type boot<cr>.\nWhen the kernel has booted" - " please type fsrecover.sh<cr>\n"); - - return(1); -} - -U_BOOT_CMD(mbsetup, 1, 1, metroboxSetupVars, - "Set environment to factory defaults", ""); - -U_BOOT_CMD(mbrecover, 1, 1, metroboxRecover, - "Set environment to allow for fs recovery", ""); diff --git a/board/sandburst/metrobox/metrobox.h b/board/sandburst/metrobox/metrobox.h deleted file mode 100644 index d64f496..0000000 --- a/board/sandburst/metrobox/metrobox.h +++ /dev/null @@ -1,29 +0,0 @@ -#ifndef __METROBOX_H__ -#define __METROBOX_H__ -/* - * (C) Copyright 2005 - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -typedef struct metrobox_board_id_s { - const char name[40]; -} METROBOX_BOARD_ID_ST, *METROBOX_BOARD_ID_PST; - - -/* Metrobox Opto-FPGA registers and definitions */ -#include "hal_xc_auto.h" -typedef struct opto_fpga_regs_s { - volatile unsigned long revision_ul; /* Read Only */ - volatile unsigned long reset_ul; /* Read/Write */ - volatile unsigned long status_ul; /* Read Only */ - volatile unsigned long interrupt_ul; /* Read Only */ - volatile unsigned long mask_ul; /* Read/Write */ - volatile unsigned long scratch_ul; /* Read/Write */ - volatile unsigned long scrmask_ul; /* Read/Write */ - volatile unsigned long control_ul; /* Read/Write */ - volatile unsigned long boardinfo_ul; /* Read Only */ -} __attribute__ ((packed)) OPTO_FPGA_REGS_ST , *OPTO_FPGA_REGS_PST; - -#endif /* __METROBOX_H__ */ diff --git a/board/sandburst/metrobox/metrobox_version.h b/board/sandburst/metrobox/metrobox_version.h deleted file mode 100644 index 8264f56..0000000 --- a/board/sandburst/metrobox/metrobox_version.h +++ /dev/null @@ -1,11 +0,0 @@ -#ifndef _METROBOX_VERSION_H_ -#define _METROBOX_VERSION_H_ -/* - * (C) Copyright 2005 - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ -#define METROBOX_U_BOOT_REL_STR "Release 2.0.3" - -#endif diff --git a/board/sandburst/metrobox/u-boot.lds.debug b/board/sandburst/metrobox/u-boot.lds.debug deleted file mode 100644 index 7ff09c0..0000000 --- a/board/sandburst/metrobox/u-boot.lds.debug +++ /dev/null @@ -1,130 +0,0 @@ -/* - * (C) Copyright 2002-2005 - * Wolfgang Denk, DENX Software Engineering, wd@denx.de. - * Travis B. Sawyer, Sandburst Corporation, tsawyer@sandburst.com - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -OUTPUT_ARCH(powerpc) -/* Do we need any of these for elf? - __DYNAMIC = 0; */ -SECTIONS -{ - /* Read-only sections, merged into text segment: */ - . = + SIZEOF_HEADERS; - .interp : { *(.interp) } - .hash : { *(.hash) } - .dynsym : { *(.dynsym) } - .dynstr : { *(.dynstr) } - .rel.text : { *(.rel.text) } - .rela.text : { *(.rela.text) } - .rel.data : { *(.rel.data) } - .rela.data : { *(.rela.data) } - .rel.rodata : { *(.rel.rodata) } - .rela.rodata : { *(.rela.rodata) } - .rel.got : { *(.rel.got) } - .rela.got : { *(.rela.got) } - .rel.ctors : { *(.rel.ctors) } - .rela.ctors : { *(.rela.ctors) } - .rel.dtors : { *(.rel.dtors) } - .rela.dtors : { *(.rela.dtors) } - .rel.bss : { *(.rel.bss) } - .rela.bss : { *(.rela.bss) } - .rel.plt : { *(.rel.plt) } - .rela.plt : { *(.rela.plt) } - .init : { *(.init) } - .plt : { *(.plt) } - .text : - { - /* WARNING - the following is hand-optimized to fit within */ - /* the sector layout of our flash chips! XXX FIXME XXX */ - - arch/powerpc/cpu/ppc4xx/start.o (.text) - board/sandburst/metrobox/init.o (.text) - arch/powerpc/cpu/ppc4xx/kgdb.o (.text) - arch/powerpc/cpu/ppc4xx/traps.o (.text) - arch/powerpc/cpu/ppc4xx/interrupts.o (.text) - arch/powerpc/cpu/ppc4xx/4xx_uart.o (.text) - arch/powerpc/cpu/ppc4xx/cpu_init.o (.text) - arch/powerpc/cpu/ppc4xx/speed.o (.text) - drivers/net/4xx_enet.o (.text) - common/dlmalloc.o (.text) - lib/crc32.o (.text) - arch/powerpc/lib/extable.o (.text) - lib/zlib.o (.text) - -/* common/env_embedded.o(.text) */ - - *(.text) - *(.got1) - } - _etext = .; - PROVIDE (etext = .); - .rodata : - { - *(.rodata) - *(.rodata1) - *(.rodata.str1.4) - *(.eh_frame) - } - .fini : { *(.fini) } =0 - .ctors : { *(.ctors) } - .dtors : { *(.dtors) } - - /* Read-write section, merged into data segment: */ - . = (. + 0x0FFF) & 0xFFFFF000; - _erotext = .; - PROVIDE (erotext = .); - .reloc : - { - *(.got) - _GOT2_TABLE_ = .; - *(.got2) - _FIXUP_TABLE_ = .; - *(.fixup) - } - __got2_entries = (_FIXUP_TABLE_ - _GOT2_TABLE_) >>2; - __fixup_entries = (. - _FIXUP_TABLE_)>>2; - - .data : - { - *(.data) - *(.data1) - *(.sdata) - *(.sdata2) - *(.dynamic) - CONSTRUCTORS - } - _edata = .; - PROVIDE (edata = .); - - - . = ALIGN(4); - .u_boot_list : { - KEEP(*(SORT(.u_boot_list*))); - } - - - __start___ex_table = .; - __ex_table : { *(__ex_table) } - __stop___ex_table = .; - - . = ALIGN(256); - __init_begin = .; - .text.init : { *(.text.init) } - .data.init : { *(.data.init) } - . = ALIGN(256); - __init_end = .; - - __bss_start = .; - .bss : - { - *(.sbss) *(.scommon) - *(.dynbss) - *(.bss) - *(COMMON) - } - __bss_end = . ; - PROVIDE (end = .); -} diff --git a/configs/KAREF_defconfig b/configs/KAREF_defconfig deleted file mode 100644 index fcca3c9..0000000 --- a/configs/KAREF_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_KAREF=y diff --git a/configs/METROBOX_defconfig b/configs/METROBOX_defconfig deleted file mode 100644 index 14b471a..0000000 --- a/configs/METROBOX_defconfig +++ /dev/null @@ -1,3 +0,0 @@ -CONFIG_PPC=y -CONFIG_4xx=y -CONFIG_TARGET_METROBOX=y diff --git a/doc/README.scrapyard b/doc/README.scrapyard index 2f5034f..92ba1e4 100644 --- a/doc/README.scrapyard +++ b/doc/README.scrapyard @@ -12,6 +12,8 @@ The list should be sorted in reverse chronological order.

Board Arch CPU Commit Removed Last known maintainer/contact ================================================================================================= +KAREF powerpc ppc4xx - - Travis Sawyer travis.sawyer@sandburst.com +METROBOX powerpc ppc4xx - - Travis Sawyer travis.sawyer@sandburst.com PK1C20 nios2 - 70fbc461 2014-08-24 Scott McNutt smcnutt@psyent.com PCI5441 nios2 - 70fbc461 2014-08-24 Scott McNutt smcnutt@psyent.com flagadm powerpc mpc8xx aec6f8c5 2014-08-22 Kári Davíðsson kd@flaga.is diff --git a/include/configs/KAREF.h b/include/configs/KAREF.h deleted file mode 100644 index 546b725..0000000 --- a/include/configs/KAREF.h +++ /dev/null @@ -1,284 +0,0 @@ -/* - * (C) Copyright 2004 Sandburst Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * KAMINOREFDES.h - configuration for the Sandburst Kamino Reference - * design. - ***********************************************************************/ - -/* - * $Id: KAREF.h,v 1.6 2005/06/03 15:05:25 tsawyer Exp $ - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_KAREF 1 /* Board is Kamino Ref Variant */ -#define CONFIG_440GX 1 /* Specifc GX support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF80000 - -#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/ -#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ - -#define CONFIG_VERY_BIG_RAM 1 -#define CONFIG_VERSION_VARIABLE - -#define CONFIG_IDENT_STRING " Sandburst Kamino Reference Design" - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */ -#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) -#define CONFIG_SYS_KAREF_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000) -#define CONFIG_SYS_OFEM_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08400000) -#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000) -#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) - -/* Here for completeness */ -#define CONFIG_SYS_OFEMAC_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08600000) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/ -#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F -#define CONFIG_SYS_I2C_PPC4XX_CH1 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */ -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F -#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */ -#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */ -#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ -#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */ - -#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR) - -#define CONFIG_BOOTDELAY 5 /* 5 second autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/*----------------------------------------------------------------------- - * Networking - *----------------------------------------------------------------------*/ -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ -#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */ -#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */ -#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */ -#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */ -#define CONFIG_PHY_RESET_DELAY 1000 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */ -#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */ -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_PING -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT - - -/* Include NetConsole support */ -#define CONFIG_NETCONSOLE - -/* Include auto complete with tabs */ -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "KaRefDes=> " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */ - - -/*----------------------------------------------------------------------- - * Console Buffer - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -/*----------------------------------------------------------------------- - * Memory Test - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Compact Flash (in true IDE mode) - *----------------------------------------------------------------------*/ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */ - -#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride - to get to the correct offset */ -#define CONFIG_DOS_PARTITION 1 /* Include dos partition */ - -/*----------------------------------------------------------------------- - * PCI - *----------------------------------------------------------------------*/ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices */ -#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE) - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#endif - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - *----------------------------------------------------------------------*/ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */ - -#endif /* __CONFIG_H */ diff --git a/include/configs/METROBOX.h b/include/configs/METROBOX.h deleted file mode 100644 index 69ab5bb..0000000 --- a/include/configs/METROBOX.h +++ /dev/null @@ -1,349 +0,0 @@ -/* - * (C) Copyright 2004 Sandburst Corporation - * - * SPDX-License-Identifier: GPL-2.0+ - */ - -/************************************************************************ - * METROBOX.h - configuration Sandburst MetroBox - ***********************************************************************/ - -/* - * $Id: METROBOX.h,v 1.21 2005/06/03 15:05:25 tsawyer Exp $ - * - * - * $Log: METROBOX.h,v $ - * Revision 1.21 2005/06/03 15:05:25 tsawyer - * MB rev 2.0.3 KA rev 0.0.7. Add CONFIG_VERSION_VARIABLE, Add fakeled to MB - * - * Revision 1.20 2005/04/11 20:51:11 tsawyer - * fix ethernet - * - * Revision 1.19 2005/04/06 15:13:36 tsawyer - * Update appropriate files to coincide with u-boot 1.1.3 - * - * Revision 1.18 2005/03/10 14:16:02 tsawyer - * add def'n for cis8201 short etch option. - * - * Revision 1.17 2005/03/09 19:49:51 tsawyer - * Remove KGDB to allow use of 2nd serial port - * - * Revision 1.16 2004/12/02 19:00:23 tsawyer - * Add misc_init_f to turn on i2c-1 and all four fans before sdram init - * - * Revision 1.15 2004/09/15 18:04:12 tsawyer - * add multiple serial port support - * - * Revision 1.14 2004/09/03 15:27:51 tsawyer - * All metrobox boards are at 66.66 sys clock - * - * Revision 1.13 2004/08/05 20:27:46 tsawyer - * Remove system ace definitions, add net console support - * - * Revision 1.12 2004/07/29 20:00:13 tsawyer - * Add i2c bus 1 - * - * Revision 1.11 2004/07/21 13:44:18 tsawyer - * SystemACE is out, CF direct to local bus is in - * - * Revision 1.10 2004/06/29 19:08:55 tsawyer - * Add CONFIG_MISC_INIT_R - * - * Revision 1.9 2004/06/28 21:30:53 tsawyer - * Fix default BOOTARGS - * - * Revision 1.8 2004/06/17 15:51:08 tsawyer - * auto complete - * - * Revision 1.7 2004/06/17 15:08:49 tsawyer - * Add autocomplete - * - * Revision 1.6 2004/06/15 12:33:57 tsawyer - * debugging checkpoint - * - * Revision 1.5 2004/06/12 19:48:28 tsawyer - * Debugging checkpoint - * - * Revision 1.4 2004/06/02 13:03:06 tsawyer - * Fix eth addrs - * - * Revision 1.3 2004/05/18 19:56:10 tsawyer - * Change default bootcommand to pImage.metrobox - * - * Revision 1.2 2004/05/18 14:13:44 tsawyer - * Add bringup values for bootargs and bootcommand. - * Remove definition of ipaddress and serverip addresses. - * - * Revision 1.1 2004/04/16 15:08:54 tsawyer - * Initial Revision - * - * - */ - -#ifndef __CONFIG_H -#define __CONFIG_H - -/*----------------------------------------------------------------------- - * High Level Configuration Options - *----------------------------------------------------------------------*/ -#define CONFIG_METROBOX 1 /* Board is Metrobox */ -#define CONFIG_440GX 1 /* Specifc GX support */ -#define CONFIG_440 1 /* ... PPC440 family */ -#define CONFIG_BOARD_EARLY_INIT_F 1 /* Call board_pre_init */ -#define CONFIG_MISC_INIT_F 1 /* Call board misc_init_f */ -#define CONFIG_MISC_INIT_R 1 /* Call board misc_init_r */ - -#define CONFIG_SYS_TEXT_BASE 0xFFF80000 - -#undef CONFIG_SYS_DRAM_TEST /* Disable-takes long time!*/ -#define CONFIG_SYS_CLK_FREQ 66666666 /* external freq to pll */ - -#define CONFIG_VERY_BIG_RAM 1 -#define CONFIG_VERSION_VARIABLE - -#define CONFIG_IDENT_STRING " Sandburst Metrobox" - -/*----------------------------------------------------------------------- - * Base addresses -- Note these are effective addresses where the - * actual resources get mapped (not physical addresses) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_SDRAM_BASE 0x00000000 /* _must_ be 0 */ -#define CONFIG_SYS_FLASH_BASE 0xfff80000 /* start of FLASH */ -#define CONFIG_SYS_MONITOR_BASE 0xfff80000 /* start of monitor */ -#define CONFIG_SYS_PCI_MEMBASE 0x80000000 /* mapped pci memory */ -#define CONFIG_SYS_ISRAM_BASE 0xc0000000 /* internal SRAM */ -#define CONFIG_SYS_PCI_BASE 0xd0000000 /* internal PCI regs */ - -#define CONFIG_SYS_NVRAM_BASE_ADDR (CONFIG_SYS_PERIPHERAL_BASE + 0x08000000) -#define CONFIG_SYS_FPGA_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08200000) -#define CONFIG_SYS_BME32_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x08500000) -#define CONFIG_SYS_GPIO_BASE (CONFIG_SYS_PERIPHERAL_BASE + 0x00000700) - -/*----------------------------------------------------------------------- - * Initial RAM & stack pointer (placed in internal SRAM) - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_TEMP_STACK_OCM 1 -#define CONFIG_SYS_OCM_DATA_ADDR CONFIG_SYS_ISRAM_BASE -#define CONFIG_SYS_INIT_RAM_ADDR CONFIG_SYS_ISRAM_BASE /* Initial RAM address */ -#define CONFIG_SYS_INIT_RAM_SIZE 0x2000 /* Size of used area in RAM */ - -#define CONFIG_SYS_GBL_DATA_OFFSET (CONFIG_SYS_INIT_RAM_SIZE - GENERATED_GBL_DATA_SIZE) -#define CONFIG_SYS_INIT_SP_OFFSET (CONFIG_SYS_GBL_DATA_OFFSET - 0x4) - -#define CONFIG_SYS_MONITOR_LEN (256 * 1024) /* Rsrv 256kB for Mon */ -#define CONFIG_SYS_MALLOC_LEN (128 * 1024) /* Rsrv 128kB for malloc */ - -/*----------------------------------------------------------------------- - * Serial Port - *----------------------------------------------------------------------*/ -#define CONFIG_CONS_INDEX 1 /* Use UART0 */ -#define CONFIG_SYS_NS16550 -#define CONFIG_SYS_NS16550_SERIAL -#define CONFIG_SYS_NS16550_REG_SIZE 1 -#define CONFIG_SYS_NS16550_CLK get_serial_clock() -#define CONFIG_BAUDRATE 9600 - -#define CONFIG_SYS_BAUDRATE_TABLE \ - {300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200} - -/*----------------------------------------------------------------------- - * NVRAM/RTC - * - * NOTE: Upper 8 bytes of NVRAM is where the RTC registers are located. - * The DS1743 code assumes this condition (i.e. -- it assumes the base - * address for the RTC registers is: - * - * CONFIG_SYS_NVRAM_BASE_ADDR + CONFIG_SYS_NVRAM_SIZE - * - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_NVRAM_SIZE (0x2000 - 8) /* NVRAM size(8k)- RTC regs*/ -#define CONFIG_RTC_DS174x 1 /* DS1743 RTC */ - -/*----------------------------------------------------------------------- - * FLASH related - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MAX_FLASH_BANKS 1 /* number of banks */ -#define CONFIG_SYS_MAX_FLASH_SECT 8 /* sectors per device */ - -#undef CONFIG_SYS_FLASH_CHECKSUM -#define CONFIG_SYS_FLASH_ERASE_TOUT 120000 /* Flash Erase TO (in ms) */ -#define CONFIG_SYS_FLASH_WRITE_TOUT 500 /* Flash Write TO(in ms) */ - -/*----------------------------------------------------------------------- - * DDR SDRAM - *----------------------------------------------------------------------*/ -#define CONFIG_SPD_EEPROM 1 /* Use SPD EEPROM for setup*/ -#define SPD_EEPROM_ADDRESS {0x53} /* SPD i2c spd addresses */ - -/*----------------------------------------------------------------------- - * I2C - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_I2C -#define CONFIG_SYS_I2C_PPC4XX -#define CONFIG_SYS_I2C_PPC4XX_CH0 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_0 400000 -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_0 0x7F -#define CONFIG_SYS_I2C_PPC4XX_CH1 -#define CONFIG_SYS_I2C_PPC4XX_SPEED_1 400000 /* I2C speed 400kHz */ -#define CONFIG_SYS_I2C_PPC4XX_SLAVE_1 0x7F -#define CONFIG_SYS_I2C_NOPROBES { { 0, 0x69} } /* Don't probe these addrs */ - -/*----------------------------------------------------------------------- - * Environment - *----------------------------------------------------------------------*/ -#define CONFIG_ENV_IS_IN_NVRAM 1 /* Environment uses NVRAM */ -#undef CONFIG_ENV_IS_IN_FLASH /* ... not in flash */ -#undef CONFIG_ENV_IS_IN_EEPROM /* ... not in EEPROM */ -#define CONFIG_ENV_OVERWRITE 1 /* allow env overwrite */ - -#define CONFIG_ENV_SIZE 0x1000 /* Size of Env vars */ -#define CONFIG_ENV_ADDR (CONFIG_SYS_NVRAM_BASE_ADDR) - -#define CONFIG_BOOTARGS "console=ttyS0,9600 root=/dev/nfs rw nfsroot=$serverip:/home/metrobox0 nfsaddrs=$ipaddr:::::eth0:none " -#define CONFIG_BOOTCOMMAND "tftp 8000000 pImage.metrobox;bootm 8000000" -#define CONFIG_BOOTDELAY 5 /* disable autoboot */ - -#define CONFIG_LOADS_ECHO 1 /* echo on for serial dnld */ -#define CONFIG_SYS_LOADS_BAUD_CHANGE 1 /* allow baudrate change */ - -/*----------------------------------------------------------------------- - * Networking - *----------------------------------------------------------------------*/ -#define CONFIG_PPC4xx_EMAC -#define CONFIG_MII 1 /* MII PHY management */ -#define CONFIG_PHY_ADDR 0xff /* no phy on EMAC0 */ -#define CONFIG_PHY1_ADDR 0xff /* no phy on EMAC1 */ -#define CONFIG_PHY2_ADDR 0x08 /* PHY addr, MGMT, EMAC2 */ -#define CONFIG_PHY3_ADDR 0x18 /* PHY addr, LCL, EMAC3 */ -#define CONFIG_HAS_ETH0 -#define CONFIG_HAS_ETH1 -#define CONFIG_HAS_ETH2 -#define CONFIG_HAS_ETH3 -#define CONFIG_PHY_RESET 1 /* reset phy upon startup */ -#define CONFIG_CIS8201_PHY 1 /* RGMII mode for Cicada */ -#define CONFIG_CIS8201_SHORT_ETCH 1 /* Use short etch mode */ -#define CONFIG_PHY_GIGE 1 /* GbE speed/duplex detect */ -#define CONFIG_PHY_RESET_DELAY 1000 -#define CONFIG_NETMASK 255.255.0.0 -#define CONFIG_ETHADDR 00:00:00:00:00:00 /* No EMAC 0 support */ -#define CONFIG_ETH1ADDR 00:00:00:00:00:00 /* No EMAC 1 support */ -#define CONFIG_SYS_RX_ETH_BUFFER 32 /* #eth rx buff & descrs */ - - -/* - * BOOTP options - */ -#define CONFIG_BOOTP_BOOTFILESIZE -#define CONFIG_BOOTP_BOOTPATH -#define CONFIG_BOOTP_GATEWAY -#define CONFIG_BOOTP_HOSTNAME - - -/* - * Command line configuration. - */ -#include <config_cmd_default.h> - -#define CONFIG_CMD_PCI -#define CONFIG_CMD_IRQ -#define CONFIG_CMD_I2C -#define CONFIG_CMD_DHCP -#define CONFIG_CMD_DATE -#define CONFIG_CMD_BEDBUG -#define CONFIG_CMD_PING -#define CONFIG_CMD_DIAG -#define CONFIG_CMD_MII -#define CONFIG_CMD_NET -#define CONFIG_CMD_ELF -#define CONFIG_CMD_IDE -#define CONFIG_CMD_FAT - - -/* Include NetConsole support */ -#define CONFIG_NETCONSOLE - -/* Include auto complete with tabs */ -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_AUTO_COMPLETE 1 -#define CONFIG_SYS_ALT_MEMTEST 1 /* use real memory test */ - -#define CONFIG_SYS_LONGHELP /* undef to save memory */ -#define CONFIG_SYS_PROMPT "MetroBox=> " /* Monitor Command Prompt */ - -#define CONFIG_SYS_HUSH_PARSER 1 /* HUSH for ext'd cli */ - - -/*----------------------------------------------------------------------- - * Console Buffer - *----------------------------------------------------------------------*/ -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_SYS_CBSIZE 1024 /* Console I/O Buffer Size */ -#else -#define CONFIG_SYS_CBSIZE 256 /* Console I/O Buffer Size */ -#endif -#define CONFIG_SYS_PBSIZE (CONFIG_SYS_CBSIZE+sizeof(CONFIG_SYS_PROMPT)+16) - /* Print Buffer Size */ -#define CONFIG_SYS_MAXARGS 16 /* max number of cmd args */ -#define CONFIG_SYS_BARGSIZE CONFIG_SYS_CBSIZE /* Boot Arg Buffer Size */ - -/*----------------------------------------------------------------------- - * Memory Test - *----------------------------------------------------------------------*/ -#define CONFIG_SYS_MEMTEST_START 0x0400000 /* memtest works on */ -#define CONFIG_SYS_MEMTEST_END 0x0C00000 /* 4 ... 12 MB in DRAM */ - -/*----------------------------------------------------------------------- - * Compact Flash (in true IDE mode) - *----------------------------------------------------------------------*/ -#undef CONFIG_IDE_8xx_DIRECT /* no pcmcia interface required */ -#undef CONFIG_IDE_LED /* no led for ide supported */ - -#define CONFIG_IDE_RESET /* reset for ide supported */ -#define CONFIG_SYS_IDE_MAXBUS 1 /* max. 1 IDE busses */ -#define CONFIG_SYS_IDE_MAXDEVICE (CONFIG_SYS_IDE_MAXBUS*1) /* max. 1 drives per IDE bus */ - -#define CONFIG_SYS_ATA_BASE_ADDR 0xF0000000 -#define CONFIG_SYS_ATA_IDE0_OFFSET 0x0000 -#define CONFIG_SYS_ATA_DATA_OFFSET 0x0000 /* Offset for data I/O */ -#define CONFIG_SYS_ATA_REG_OFFSET 0x0000 /* Offset for normal register accesses*/ -#define CONFIG_SYS_ATA_ALT_OFFSET 0x100000 /* Offset for alternate registers */ - -#define CONFIG_SYS_ATA_STRIDE 2 /* Directly connected CF, needs a stride - to get to the correct offset */ -#define CONFIG_DOS_PARTITION 1 /* Include dos partition */ - -/*----------------------------------------------------------------------- - * PCI - *----------------------------------------------------------------------*/ -/* General PCI */ -#define CONFIG_PCI /* include pci support */ -#define CONFIG_PCI_INDIRECT_BRIDGE /* indirect PCI bridge support */ -#define CONFIG_PCI_PNP /* do pci plug-and-play */ -#define CONFIG_PCI_SCAN_SHOW /* show pci devices */ -#define CONFIG_SYS_PCI_TARGBASE (CONFIG_SYS_PCI_MEMBASE) - -/* Board-specific PCI */ -#define CONFIG_SYS_PCI_TARGET_INIT /* let board init pci target*/ - -#define CONFIG_SYS_PCI_SUBSYS_VENDORID 0x17BA /* Sandburst */ -#define CONFIG_SYS_PCI_SUBSYS_DEVICEID 0xcafe /* Whatever */ - -/* - * For booting Linux, the board info and command line data - * have to be in the first 8 MB of memory, since this is - * the maximum mapped by the Linux kernel during initialization. - */ -#define CONFIG_SYS_BOOTMAPSZ (8 << 20) /* Initial Memory map for Linux */ - -#if defined(CONFIG_CMD_KGDB) -#define CONFIG_KGDB_BAUDRATE 230400 /* kgdb serial port baud */ -#endif - -/*----------------------------------------------------------------------- - * Miscellaneous configurable options - *----------------------------------------------------------------------*/ -#undef CONFIG_WATCHDOG /* watchdog disabled */ -#define CONFIG_SYS_LOAD_ADDR 0x8000000 /* default load address */ -#define CONFIG_SYS_EXTBDINFO 1 /* use extended board_info */ - -#endif /* __CONFIG_H */