From: Boris Brezillon boris.brezillon@free-electrons.com
Some MTD sublayers/drivers are implementing ->_read/write_oob() and provide dummy wrappers for their ->_read/write() implementations. Let the core handle this case instead of duplicating the logic.
Signed-off-by: Boris Brezillon boris.brezillon@free-electrons.com Acked-by: Robert Jarzmik robert.jarzmik@free.fr Acked-by: Brian Norris computersforpeace@gmail.com Reviewed-by: Miquel Raynal miquel.raynal@free-electrons.com Tested-by: Ladislav Michl ladis@linux-mips.org Signed-off-by: Miquel Raynal miquel.raynal@bootlin.com Reviewed-by: Jagan Teki jagan@openedev.com --- drivers/mtd/mtdcore.c | 31 ++++++++++++++++++-- drivers/mtd/mtdpart.c | 6 ++-- drivers/mtd/nand/nand_base.c | 56 ----------------------------------- drivers/mtd/onenand/onenand_base.c | 60 -------------------------------------- 4 files changed, 33 insertions(+), 120 deletions(-)
diff --git a/drivers/mtd/mtdcore.c b/drivers/mtd/mtdcore.c index 6217be2352..60ad28efd4 100644 --- a/drivers/mtd/mtdcore.c +++ b/drivers/mtd/mtdcore.c @@ -937,7 +937,20 @@ int mtd_read(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen, * representing the maximum number of bitflips that were corrected on * any one ecc region (if applicable; zero otherwise). */ - ret_code = mtd->_read(mtd, from, len, retlen, buf); + if (mtd->_read) { + ret_code = mtd->_read(mtd, from, len, retlen, buf); + } else if (mtd->_read_oob) { + struct mtd_oob_ops ops = { + .len = len, + .datbuf = buf, + }; + + ret_code = mtd->_read_oob(mtd, from, &ops); + *retlen = ops.retlen; + } else { + return -ENOTSUPP; + } + if (unlikely(ret_code < 0)) return ret_code; if (mtd->ecc_strength == 0) @@ -952,10 +965,24 @@ int mtd_write(struct mtd_info *mtd, loff_t to, size_t len, size_t *retlen, *retlen = 0; if (to < 0 || to > mtd->size || len > mtd->size - to) return -EINVAL; - if (!mtd->_write || !(mtd->flags & MTD_WRITEABLE)) + if ((!mtd->_write && !mtd->_write_oob) || + !(mtd->flags & MTD_WRITEABLE)) return -EROFS; if (!len) return 0; + + if (!mtd->_write) { + struct mtd_oob_ops ops = { + .len = len, + .datbuf = (u8 *)buf, + }; + int ret; + + ret = mtd->_write_oob(mtd, to, &ops); + *retlen = ops.retlen; + return ret; + } + return mtd->_write(mtd, to, len, retlen, buf); } EXPORT_SYMBOL_GPL(mtd_write); diff --git a/drivers/mtd/mtdpart.c b/drivers/mtd/mtdpart.c index f87c962205..ccbb1757ea 100644 --- a/drivers/mtd/mtdpart.c +++ b/drivers/mtd/mtdpart.c @@ -417,8 +417,10 @@ static struct mtd_part *allocate_partition(struct mtd_info *master, slave->mtd.dev.parent = master->dev.parent; #endif
- slave->mtd._read = part_read; - slave->mtd._write = part_write; + if (master->_read) + slave->mtd._read = part_read; + if (master->_write) + slave->mtd._write = part_write;
if (master->_panic_write) slave->mtd._panic_write = part_panic_write; diff --git a/drivers/mtd/nand/nand_base.c b/drivers/mtd/nand/nand_base.c index 64e4621aaa..0b58e15b03 100644 --- a/drivers/mtd/nand/nand_base.c +++ b/drivers/mtd/nand/nand_base.c @@ -1863,33 +1863,6 @@ read_retry: return max_bitflips; }
-/** - * nand_read - [MTD Interface] MTD compatibility function for nand_do_read_ecc - * @mtd: MTD device structure - * @from: offset to read from - * @len: number of bytes to read - * @retlen: pointer to variable to store the number of read bytes - * @buf: the databuffer to put data - * - * Get hold of the chip and call nand_do_read. - */ -static int nand_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t *retlen, uint8_t *buf) -{ - struct mtd_oob_ops ops; - int ret; - - nand_get_device(mtd, FL_READING); - memset(&ops, 0, sizeof(ops)); - ops.len = len; - ops.datbuf = buf; - ops.mode = MTD_OPS_PLACE_OOB; - ret = nand_do_read_ops(mtd, from, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; -} - /** * nand_read_oob_std - [REPLACEABLE] the most common OOB data read function * @mtd: mtd info structure @@ -2674,33 +2647,6 @@ static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len, return ret; }
-/** - * nand_write - [MTD Interface] NAND write with ECC - * @mtd: MTD device structure - * @to: offset to write to - * @len: number of bytes to write - * @retlen: pointer to variable to store the number of written bytes - * @buf: the data to write - * - * NAND write with ECC. - */ -static int nand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t *retlen, const uint8_t *buf) -{ - struct mtd_oob_ops ops; - int ret; - - nand_get_device(mtd, FL_WRITING); - memset(&ops, 0, sizeof(ops)); - ops.len = len; - ops.datbuf = (uint8_t *)buf; - ops.mode = MTD_OPS_PLACE_OOB; - ret = nand_do_write_ops(mtd, to, &ops); - *retlen = ops.retlen; - nand_release_device(mtd); - return ret; -} - /** * nand_do_write_oob - [MTD Interface] NAND write out-of-band * @mtd: MTD device structure @@ -4620,8 +4566,6 @@ int nand_scan_tail(struct mtd_info *mtd) mtd->flags = (chip->options & NAND_ROM) ? MTD_CAP_ROM : MTD_CAP_NANDFLASH; mtd->_erase = nand_erase; - mtd->_read = nand_read; - mtd->_write = nand_write; mtd->_panic_write = panic_nand_write; mtd->_read_oob = nand_read_oob; mtd->_write_oob = nand_write_oob; diff --git a/drivers/mtd/onenand/onenand_base.c b/drivers/mtd/onenand/onenand_base.c index 86b1640357..080d8f0d94 100644 --- a/drivers/mtd/onenand/onenand_base.c +++ b/drivers/mtd/onenand/onenand_base.c @@ -1088,35 +1088,6 @@ static int onenand_read_oob_nolock(struct mtd_info *mtd, loff_t from, return 0; }
-/** - * onenand_read - [MTD Interface] MTD compability function for onenand_read_ecc - * @param mtd MTD device structure - * @param from offset to read from - * @param len number of bytes to read - * @param retlen pointer to variable to store the number of read bytes - * @param buf the databuffer to put data - * - * This function simply calls onenand_read_ecc with oob buffer and oobsel = NULL -*/ -int onenand_read(struct mtd_info *mtd, loff_t from, size_t len, - size_t * retlen, u_char * buf) -{ - struct mtd_oob_ops ops = { - .len = len, - .ooblen = 0, - .datbuf = buf, - .oobbuf = NULL, - }; - int ret; - - onenand_get_device(mtd, FL_READING); - ret = onenand_read_ops_nolock(mtd, from, &ops); - onenand_release_device(mtd); - - *retlen = ops.retlen; - return ret; -} - /** * onenand_read_oob - [MTD Interface] OneNAND read out-of-band * @param mtd MTD device structure @@ -1636,35 +1607,6 @@ static int onenand_write_oob_nolock(struct mtd_info *mtd, loff_t to, return ret; }
-/** - * onenand_write - [MTD Interface] compability function for onenand_write_ecc - * @param mtd MTD device structure - * @param to offset to write to - * @param len number of bytes to write - * @param retlen pointer to variable to store the number of written bytes - * @param buf the data to write - * - * Write with ECC - */ -int onenand_write(struct mtd_info *mtd, loff_t to, size_t len, - size_t * retlen, const u_char * buf) -{ - struct mtd_oob_ops ops = { - .len = len, - .ooblen = 0, - .datbuf = (u_char *) buf, - .oobbuf = NULL, - }; - int ret; - - onenand_get_device(mtd, FL_WRITING); - ret = onenand_write_ops_nolock(mtd, to, &ops); - onenand_release_device(mtd); - - *retlen = ops.retlen; - return ret; -} - /** * onenand_write_oob - [MTD Interface] OneNAND write out-of-band * @param mtd MTD device structure @@ -2656,8 +2598,6 @@ int onenand_probe(struct mtd_info *mtd)
mtd->flags = MTD_CAP_NANDFLASH; mtd->_erase = onenand_erase; - mtd->_read = onenand_read; - mtd->_write = onenand_write; mtd->_read_oob = onenand_read_oob; mtd->_write_oob = onenand_write_oob; mtd->_sync = onenand_sync;