On 06/06/2018 04:16 AM, Pramod Kumar wrote:
LS1012A-FRDM and LS1012A-FRWY board.
1-Move all common files applicable for both boards LS1012A-FRDM and LS1012A-FRWY into board directory ls1012afrx. 2-Restructure LS1012A-FRDM code. Only board specific files are in LS1012A-FRDM board directory.
Signed-off-by: Pramod Kumar pramod.kumar_1@nxp.com
Depends on: http://patchwork.ozlabs.org/patch/918935/ http://patchwork.ozlabs.org/patch/918933/ http://patchwork.ozlabs.org/patch/918932/
Changes for v2:
- Rebased patch to above dependency patches
arch/arm/Kconfig | 2 + board/freescale/ls1012afrdm/Kconfig | 60 ---------------------- board/freescale/ls1012afrdm/MAINTAINERS | 12 +---- board/freescale/ls1012afrdm/Makefile | 4 +- board/freescale/ls1012afrx/Kconfig | 27 ++++++++++ board/freescale/{ls1012afrdm => ls1012afrx}/eth.c | 0 .../ls1012afrdm.c => ls1012afrx/ls1012afrx.c} | 0 7 files changed, 32 insertions(+), 73 deletions(-) create mode 100644 board/freescale/ls1012afrx/Kconfig rename board/freescale/{ls1012afrdm => ls1012afrx}/eth.c (100%) rename board/freescale/{ls1012afrdm/ls1012afrdm.c => ls1012afrx/ls1012afrx.c} (100%)
diff --git a/arch/arm/Kconfig b/arch/arm/Kconfig index 22234cd..ffff190 100644 --- a/arch/arm/Kconfig +++ b/arch/arm/Kconfig @@ -1417,6 +1417,8 @@ source "board/freescale/ls1046ardb/Kconfig" source "board/freescale/ls1012aqds/Kconfig" source "board/freescale/ls1012ardb/Kconfig" source "board/freescale/ls1012afrdm/Kconfig" +source "board/freescale/ls1012afrx/Kconfig" +source "board/freescale/ls1012afrwy/Kconfig" source "board/freescale/mx35pdk/Kconfig" source "board/freescale/s32v234evb/Kconfig" source "board/gdsys/a38x/Kconfig" diff --git a/board/freescale/ls1012afrdm/Kconfig b/board/freescale/ls1012afrdm/Kconfig index f52a896..58e592d 100644 --- a/board/freescale/ls1012afrdm/Kconfig +++ b/board/freescale/ls1012afrdm/Kconfig @@ -21,63 +21,3 @@ config SYS_LS_PPA_FW_ADDR default 0x40400000
endif
-if FSL_PFE
-config BOARD_SPECIFIC_OPTIONS # dummy
- def_bool y
- select PHYLIB
- imply PHY_REALTEK
- imply PHY_ATHEROS
-config DDR_PFE_PHYS_BASEADDR
- hex "PFE DDR physical base address"
- default 0x03800000
-config DDR_PFE_BASEADDR
- hex "PFE DDR base address"
- default 0x83800000
-config PFE_EMAC1_PHY_ADDR
- hex "PFE DDR base address"
- default 0x2
-config PFE_EMAC2_PHY_ADDR
- hex "PFE DDR base address"
- default 0x1
-endif
-if TARGET_LS1012AFRWY
-config SYS_BOARD
- default "ls1012afrdm"
-config SYS_VENDOR
- default "freescale"
-config SYS_SOC
- default "fsl-layerscape"
-config SYS_CONFIG_NAME
- default "ls1012afrwy"
-config SYS_LS_PFE_FW_ADDR
- hex "Flash address of PFE firmware"
- default 0x40020000
-config SYS_LS_PPA_FW_ADDR
- hex "PPA Firmware Addr"
- default 0x40060000
-config SYS_LS_PPA_ESBC_ADDR
- hex "PPA Firmware HDR Addr"
- default 0x401f4000
-config SYS_LS_PFE_ESBC_ADDR
- hex "PFE Firmware HDR Addr"
- default 0x401f8000
-endif
-source "board/freescale/common/Kconfig"
Why do you remove this file, but only add it for ls1012afrx below? Doesn't ls1012afrdm use the same common file?
Please rebase before sending another version.
York