Hi,
On 05-05-15 11:17, Daniel Kochmański wrote:
Hans de Goede writes:
Hi,
On 05/02/2015 04:26 PM, Ian Campbell wrote:
On Wed, 2015-04-29 at 17:03 +0200, Daniel Kochmański wrote:
This patch adds a20_nandread command. It is simple function utilizing function from SPL nand driver `nand_spl_load_image`.
Usage: a20_nandread <address> <offset> <bytes>
This stuff should really be integrated with cmd_nand.c rather than adding an adhoc SoC specific interface.
I want to go even further and I see that this really needs to be integrated with the blkdev code so that one can just do:
ls nand 0:1
And things will just work, these way we can also just have the standard boot cmds from config_distro_bootcmd.h work rather then needing special nand boot commands.
Regards,
Hans
It was more a convenient function then proper integration.
I understand but for upstream nand support we really want a proper solution, note that I'm find with having the nand support being read only, but it should really be integrated enough that things like:
ls nand 0:1
Will work.
I'll look into that, but it may take time - I'm quite unfamiliar with U-Boot nand interface.
Thanks!
Regards,
Hans