From: Andy Fleming afleming@freescale.com
The L1 D-cache on e6500 is write-through. This means that it's not considered a good idea to have the L1 up and running if the L2 is disabled. We don't actually *use* the L1 until after the L2 is brought up on e6500, so go ahead and move the L1 enablement after that code is done.
Signed-off-by: Andy Fleming afleming@freescale.com --- arch/powerpc/cpu/mpc85xx/start.S | 94 +++++++++++++++++++------------------- 1 file changed, 47 insertions(+), 47 deletions(-)
diff --git a/arch/powerpc/cpu/mpc85xx/start.S b/arch/powerpc/cpu/mpc85xx/start.S index 2ce5505..5542d0a 100644 --- a/arch/powerpc/cpu/mpc85xx/start.S +++ b/arch/powerpc/cpu/mpc85xx/start.S @@ -173,52 +173,6 @@ l2_disabled: mfspr r1,DBSR mtspr DBSR,r1 /* Clear all valid bits */
- /* - * Enable L1 Caches early - * - */ - -#ifdef CONFIG_SYS_CACHE_STASHING - /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ - li r2,(32 + 0) - mtspr L1CSR2,r2 -#endif - - /* Enable/invalidate the I-Cache */ - lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h - ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l - mtspr SPRN_L1CSR1,r2 -1: - mfspr r3,SPRN_L1CSR1 - and. r1,r3,r2 - bne 1b - - lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h - ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l - mtspr SPRN_L1CSR1,r3 - isync -2: - mfspr r3,SPRN_L1CSR1 - andi. r1,r3,L1CSR1_ICE@l - beq 2b - - /* Enable/invalidate the D-Cache */ - lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h - ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l - mtspr SPRN_L1CSR0,r2 -1: - mfspr r3,SPRN_L1CSR0 - and. r1,r3,r2 - bne 1b - - lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h - ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l - mtspr SPRN_L1CSR0,r3 - isync -2: - mfspr r3,SPRN_L1CSR0 - andi. r1,r3,L1CSR0_DCE@l - beq 2b
.macro create_tlb1_entry esel ts tsize epn wimg rpn perm phy_high scratch lis \scratch, FSL_BOOKE_MAS0(1, \esel, 0)@h @@ -782,11 +736,57 @@ enable_l2_cluster_l2: bne 1b lis r4, L2CSR0_L2E@h sync - stw r4, 0(r3) /* eanble L2 */ + stw r4, 0(r3) /* enable L2 */ delete_ccsr_l2_tlb: delete_tlb0_entry 0, CONFIG_SYS_CCSRBAR + 0xC20000, MAS2_I|MAS2_G, r3 #endif
+ /* + * Enable the L1. On e6500, this has to be done + * after the L2 is up. + */ + +#ifdef CONFIG_SYS_CACHE_STASHING + /* set stash id to (coreID) * 2 + 32 + L1 CT (0) */ + li r2,(32 + 0) + mtspr L1CSR2,r2 +#endif + + /* Enable/invalidate the I-Cache */ + lis r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@h + ori r2,r2,(L1CSR1_ICFI|L1CSR1_ICLFR)@l + mtspr SPRN_L1CSR1,r2 +1: + mfspr r3,SPRN_L1CSR1 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR1_CPE|L1CSR1_ICE)@h + ori r3,r3,(L1CSR1_CPE|L1CSR1_ICE)@l + mtspr SPRN_L1CSR1,r3 + isync +2: + mfspr r3,SPRN_L1CSR1 + andi. r1,r3,L1CSR1_ICE@l + beq 2b + + /* Enable/invalidate the D-Cache */ + lis r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@h + ori r2,r2,(L1CSR0_DCFI|L1CSR0_DCLFR)@l + mtspr SPRN_L1CSR0,r2 +1: + mfspr r3,SPRN_L1CSR0 + and. r1,r3,r2 + bne 1b + + lis r3,(L1CSR0_CPE|L1CSR0_DCE)@h + ori r3,r3,(L1CSR0_CPE|L1CSR0_DCE)@l + mtspr SPRN_L1CSR0,r3 + isync +2: + mfspr r3,SPRN_L1CSR0 + andi. r1,r3,L1CSR0_DCE@l + beq 2b #ifdef CONFIG_SYS_FSL_ERRATUM_A004510 #define DCSR_LAWBARH0 (CONFIG_SYS_CCSRBAR + 0x1000) #define LAW_SIZE_1M 0x13