Simon,
With the latest code in u-boot-dm.git/master, the "version" command crashes on p2371-2180 (NVIDIA Jetson TX1); see log below. Preliminary results show complete failure on Beaver and Jetson TK1 (the tests are running so I can't see the full logs yet, but every py.test test that's completed so far results in an error, so perhaps the same issue or perhaps something else)
U-Boot 2017.07-rc1-19807-g9fb9a18fd8 (Jun 08 2017 - 18:22:11 -0600), Build: jenkins-u-boot-denx_uboot_dm-master-buildTEGRA210 Model: NVIDIA P2371-2180 Board: NVIDIA P2371-2180 DRAM: 3.5 GiB MMC: sdhci@700b0000: 1, sdhci@700b0600: 0 *** Warning - bad CRC, using default environment
In: serial Out: serial Err: serial Net: No ethernet found. Hit any key to stop autoboot: 2 %08%08%08 0 Tegra210 (P2371-2180) # [-] Stream: console Tegra210 (P2371-2180) # version U-Boot 2017.07-rc1-19807-g9fb9a18fd8 (Jun 08 2017 - 18:22:11 -0600), Build: jenkins-u-boot-denx_uboot_dm-master-build-Uaarch64-linux-gnu-gcc (Ubuntu/Linaro 4.8.4-2ubuntu1~14.04.1) 4.8.4 GNU ld (GNU Binutils for Ubuntu) 2.24 "Synchronous Abort" handler, esr 0x96000021 ELR: dff437b0 LR: dff43d94 x0 : 000000000000000b x1 : 0000000000000000 x2 : 0000000000000001 x3 : 0000000000000002 x4 : 0000000070006000 x5 : ffffff80ffffffc8 x6 : 0000000000000000 x7 : 00000000dda27360 x8 : 0000000000000001 x9 : 0000000000000008 x10: 000000000000000d x11: 0000000000000006 x12: 00000000dff86000 x13: 0000000000000040 x14: 0000000000000001 x15: 00000000dff31404 x16: 00000000000ffff0 x17: 0000000000010000 x18: 00000000dda2cdf0 x19: 000000000000000b x20: ffffffffffffffff x21: 0000000000000000 x22: 0000000000000000 x23: 0000000000000000 x24: 0000000000000000 x25: 0000000000000000 x26: 0000000000000001 x27: 000000000000000b x28: 0000000000000000 x29: 00000000dda27460
Resetting CPU ...