Sync the px30 devicetree files from Linux-5.14-rc3.
Signed-off-by: Jagan Teki jagan@amarulasolutions.com --- arch/arm/dts/px30-engicam-common.dtsi | 90 +++++++++ arch/arm/dts/px30-engicam-ctouch2.dtsi | 22 +++ arch/arm/dts/px30-engicam-edimm2.2.dtsi | 59 ++++++ .../px30-engicam-px30-core-ctouch2-of10.dts | 77 ++++++++ .../dts/px30-engicam-px30-core-edimm2.2.dts | 22 +++ arch/arm/dts/px30-evb.dts | 91 +++++++-- arch/arm/dts/px30.dtsi | 178 +++++++++++------- 7 files changed, 457 insertions(+), 82 deletions(-) create mode 100644 arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts
diff --git a/arch/arm/dts/px30-engicam-common.dtsi b/arch/arm/dts/px30-engicam-common.dtsi index bd5bde989e..3429e124d9 100644 --- a/arch/arm/dts/px30-engicam-common.dtsi +++ b/arch/arm/dts/px30-engicam-common.dtsi @@ -6,6 +6,11 @@ */
/ { + aliases { + mmc1 = &sdmmc; + mmc2 = &sdio; + }; + vcc5v0_sys: vcc5v0-sys { compatible = "regulator-fixed"; regulator-name = "vcc5v0_sys"; /* +5V */ @@ -14,6 +19,63 @@ regulator-min-microvolt = <5000000>; regulator-max-microvolt = <5000000>; }; + + sdio_pwrseq: sdio-pwrseq { + compatible = "mmc-pwrseq-simple"; + clocks = <&xin32k>; + clock-names = "ext_clock"; + post-power-on-delay-ms = <80>; + pinctrl-names = "default"; + pinctrl-0 = <&wifi_enable_h>; + }; + + vcc3v3_btreg: vcc3v3-btreg { + compatible = "regulator-gpio"; + enable-active-high; + pinctrl-names = "default"; + pinctrl-0 = <&bt_enable_h>; + regulator-name = "btreg-gpio-supply"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + states = <3300000 0x0>; + }; + + vcc3v3_rf_aux_mod: vcc3v3-rf-aux-mod { + compatible = "regulator-fixed"; + regulator-name = "vcc3v3_rf_aux_mod"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + regulator-boot-on; + vin-supply = <&vcc5v0_sys>; + }; + + xin32k: xin32k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32768>; + clock-output-names = "xin32k"; + }; +}; + +&sdio { + #address-cells = <1>; + #size-cells = <0>; + bus-width = <4>; + clock-frequency = <50000000>; + cap-sdio-irq; + cap-sd-highspeed; + keep-power-in-suspend; + mmc-pwrseq = <&sdio_pwrseq>; + non-removable; + sd-uhs-sdr104; + status = "okay"; + + brcmf: wifi@1 { + compatible = "brcm,bcm4329-fmac"; + reg = <1>; + }; };
&gmac { @@ -25,6 +87,10 @@ status = "okay"; };
+&pwm0 { + status = "okay"; +}; + &sdmmc { cap-sd-highspeed; card-detect-delay = <800>; @@ -33,7 +99,31 @@ status = "okay"; };
+&u2phy { + status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; +}; + &uart2 { pinctrl-0 = <&uart2m1_xfer>; status = "okay"; }; + +&usb20_otg { + status = "okay"; +}; + +&usb_host0_ehci { + status = "okay"; +}; + +&usb_host0_ohci { + status = "okay"; +}; diff --git a/arch/arm/dts/px30-engicam-ctouch2.dtsi b/arch/arm/dts/px30-engicam-ctouch2.dtsi index 58425b1e55..bf10a3d29f 100644 --- a/arch/arm/dts/px30-engicam-ctouch2.dtsi +++ b/arch/arm/dts/px30-engicam-ctouch2.dtsi @@ -6,3 +6,25 @@ */
#include "px30-engicam-common.dtsi" + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio_pwrseq { + reset-gpios = <&gpio1 RK_PC2 GPIO_ACTIVE_LOW>; +}; + +&vcc3v3_btreg { + enable-gpio = <&gpio1 RK_PC3 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/dts/px30-engicam-edimm2.2.dtsi b/arch/arm/dts/px30-engicam-edimm2.2.dtsi index cb00988953..449b8eb645 100644 --- a/arch/arm/dts/px30-engicam-edimm2.2.dtsi +++ b/arch/arm/dts/px30-engicam-edimm2.2.dtsi @@ -5,3 +5,62 @@ */
#include "px30-engicam-common.dtsi" + +/ { + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + panel { + compatible = "yes-optoelectronics,ytc700tlag-05-201c"; + backlight = <&backlight>; + data-mapping = "vesa-24"; + power-supply = <&vcc3v3_lcd>; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi_dphy { + status = "okay"; +}; + +/* LVDS_B(secondary) */ +&lvds { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts new file mode 100644 index 0000000000..47aa30505a --- /dev/null +++ b/arch/arm/dts/px30-engicam-px30-core-ctouch2-of10.dts @@ -0,0 +1,77 @@ +// SPDX-License-Identifier: (GPL-2.0+ OR MIT) +/* + * Copyright (c) 2020 Fuzhou Rockchip Electronics Co., Ltd + * Copyright (c) 2020 Engicam srl + * Copyright (c) 2020 Amarula Solutions(India) + */ + +/dts-v1/; +#include "px30.dtsi" +#include "px30-engicam-ctouch2.dtsi" +#include "px30-engicam-px30-core.dtsi" + +/ { + model = "Engicam PX30.Core C.TOUCH 2.0 10.1" Open Frame"; + compatible = "engicam,px30-core-ctouch2-of10", "engicam,px30-core", + "rockchip,px30"; + + backlight: backlight { + compatible = "pwm-backlight"; + pwms = <&pwm0 0 25000 0>; + }; + + chosen { + stdout-path = "serial2:115200n8"; + }; + + panel { + compatible = "ampire,am-1280800n3tzqw-t00h"; + backlight = <&backlight>; + power-supply = <&vcc3v3_lcd>; + data-mapping = "vesa-24"; + + port { + panel_in_lvds: endpoint { + remote-endpoint = <&lvds_out_panel>; + }; + }; + }; +}; + +&display_subsystem { + status = "okay"; +}; + +&dsi_dphy { + status = "okay"; +}; + +&lvds { + status = "okay"; + + ports { + port@1 { + reg = <1>; + + lvds_out_panel: endpoint { + remote-endpoint = <&panel_in_lvds>; + }; + }; + }; +}; + +&vopb { + status = "okay"; +}; + +&vopb_mmu { + status = "okay"; +}; + +&vopl { + status = "okay"; +}; + +&vopl_mmu { + status = "okay"; +}; diff --git a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts index e54d1e480d..d759478e1c 100644 --- a/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts +++ b/arch/arm/dts/px30-engicam-px30-core-edimm2.2.dts @@ -19,3 +19,25 @@ stdout-path = "serial2:115200n8"; }; }; + +&pinctrl { + bt { + bt_enable_h: bt-enable-h { + rockchip,pins = <1 RK_PC2 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; + + sdio-pwrseq { + wifi_enable_h: wifi-enable-h { + rockchip,pins = <1 RK_PC3 RK_FUNC_GPIO &pcfg_pull_none>; + }; + }; +}; + +&sdio_pwrseq { + reset-gpios = <&gpio1 RK_PC3 GPIO_ACTIVE_LOW>; +}; + +&vcc3v3_btreg { + enable-gpio = <&gpio1 RK_PC2 GPIO_ACTIVE_HIGH>; +}; diff --git a/arch/arm/dts/px30-evb.dts b/arch/arm/dts/px30-evb.dts index 4134e2ee13..c1ce9c295e 100644 --- a/arch/arm/dts/px30-evb.dts +++ b/arch/arm/dts/px30-evb.dts @@ -13,8 +13,14 @@ model = "Rockchip PX30 EVB"; compatible = "rockchip,px30-evb", "rockchip,px30";
+ aliases { + mmc0 = &sdmmc; + mmc1 = &sdio; + mmc2 = &emmc; + }; + chosen { - stdout-path = "serial2:115200n8"; + stdout-path = "serial5:115200n8"; };
adc-keys { @@ -126,22 +132,15 @@ };
panel@0 { - compatible = "sitronix,st7703"; + compatible = "xinpeng,xpp055c272"; reg = <0>; backlight = <&backlight>; iovcc-supply = <&vcc_1v8>; vci-supply = <&vcc3v3_lcd>;
- ports { - #address-cells = <1>; - #size-cells = <0>; - - port@0 { - reg = <0>; - - mipi_in_panel: endpoint { - remote-endpoint = <&mipi_out_panel>; - }; + port { + mipi_in_panel: endpoint { + remote-endpoint = <&mipi_out_panel>; }; }; }; @@ -152,7 +151,6 @@ };
&emmc { - bus-width = <8>; cap-mmc-highspeed; mmc-hs200-1_8v; non-removable; @@ -171,6 +169,11 @@ status = "okay"; };
+&gpu { + mali-supply = <&vdd_log>; + status = "okay"; +}; + &i2c0 { status = "okay";
@@ -388,6 +391,43 @@ }; };
+&i2c1 { + status = "okay"; + + sensor@d { + compatible = "asahi-kasei,ak8963"; + reg = <0x0d>; + gpios = <&gpio0 RK_PB7 GPIO_ACTIVE_HIGH>; + vdd-supply = <&vcc3v0_pmu>; + mount-matrix = "1", /* x0 */ + "0", /* y0 */ + "0", /* z0 */ + "0", /* x1 */ + "1", /* y1 */ + "0", /* z1 */ + "0", /* x2 */ + "0", /* y2 */ + "1"; /* z2 */ + }; + + touchscreen@14 { + compatible = "goodix,gt1151"; + reg = <0x14>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PA5 IRQ_TYPE_LEVEL_LOW>; + irq-gpios = <&gpio0 RK_PA5 GPIO_ACTIVE_LOW>; + reset-gpios = <&gpio0 RK_PB4 GPIO_ACTIVE_HIGH>; + VDDIO-supply = <&vcc3v3_lcd>; + }; + + sensor@4c { + compatible = "fsl,mma7660"; + reg = <0x4c>; + interrupt-parent = <&gpio0>; + interrupts = <RK_PB7 IRQ_TYPE_LEVEL_LOW>; + }; +}; + &i2s1_2ch { status = "okay"; }; @@ -464,7 +504,6 @@ };
&sdmmc { - bus-width = <4>; cap-mmc-highspeed; cap-sd-highspeed; card-detect-delay = <800>; @@ -474,10 +513,10 @@ sd-uhs-sdr104; vmmc-supply = <&vcc_sd>; vqmmc-supply = <&vccio_sd>; + status = "okay"; };
&sdio { - bus-width = <4>; cap-sd-highspeed; keep-power-in-suspend; non-removable; @@ -486,13 +525,27 @@ status = "okay"; };
-&uart1 { - pinctrl-names = "default"; - pinctrl-0 = <&uart1_xfer &uart1_cts>; +&tsadc { + rockchip,hw-tshut-mode = <1>; + rockchip,hw-tshut-polarity = <1>; + status = "okay"; +}; + +&u2phy { status = "okay"; + + u2phy_host: host-port { + status = "okay"; + }; + + u2phy_otg: otg-port { + status = "okay"; + }; };
-&uart2 { +&uart1 { + pinctrl-names = "default"; + pinctrl-0 = <&uart1_xfer &uart1_cts>; status = "okay"; };
diff --git a/arch/arm/dts/px30.dtsi b/arch/arm/dts/px30.dtsi index e892d3b5a5..248ebb61aa 100644 --- a/arch/arm/dts/px30.dtsi +++ b/arch/arm/dts/px30.dtsi @@ -143,7 +143,7 @@ };
arm-pmu { - compatible = "arm,cortex-a53-pmu"; + compatible = "arm,cortex-a35-pmu"; interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>, <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>, @@ -244,28 +244,31 @@ #size-cells = <0>;
/* These power domains are grouped by VD_LOGIC */ - pd_usb@PX30_PD_USB { + power-domain@PX30_PD_USB { reg = <PX30_PD_USB>; clocks = <&cru HCLK_HOST>, <&cru HCLK_OTG>, <&cru SCLK_OTG_ADP>; pm_qos = <&qos_usb_host>, <&qos_usb_otg>; + #power-domain-cells = <0>; }; - pd_sdcard@PX30_PD_SDCARD { + power-domain@PX30_PD_SDCARD { reg = <PX30_PD_SDCARD>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>; pm_qos = <&qos_sdmmc>; + #power-domain-cells = <0>; }; - pd_gmac@PX30_PD_GMAC { + power-domain@PX30_PD_GMAC { reg = <PX30_PD_GMAC>; clocks = <&cru ACLK_GMAC>, <&cru PCLK_GMAC>, <&cru SCLK_MAC_REF>, <&cru SCLK_GMAC_RX_TX>; pm_qos = <&qos_gmac>; + #power-domain-cells = <0>; }; - pd_mmc_nand@PX30_PD_MMC_NAND { + power-domain@PX30_PD_MMC_NAND { reg = <PX30_PD_MMC_NAND>; clocks = <&cru HCLK_NANDC>, <&cru HCLK_EMMC>, @@ -277,15 +280,17 @@ <&cru SCLK_SFC>; pm_qos = <&qos_emmc>, <&qos_nand>, <&qos_sdio>, <&qos_sfc>; + #power-domain-cells = <0>; }; - pd_vpu@PX30_PD_VPU { + power-domain@PX30_PD_VPU { reg = <PX30_PD_VPU>; clocks = <&cru ACLK_VPU>, <&cru HCLK_VPU>, <&cru SCLK_CORE_VPU>; pm_qos = <&qos_vpu>, <&qos_vpu_r128>; + #power-domain-cells = <0>; }; - pd_vo@PX30_PD_VO { + power-domain@PX30_PD_VO { reg = <PX30_PD_VO>; clocks = <&cru ACLK_RGA>, <&cru ACLK_VOPB>, @@ -300,8 +305,9 @@ <&cru SCLK_VOPB_PWM>; pm_qos = <&qos_rga_rd>, <&qos_rga_wr>, <&qos_vop_m0>, <&qos_vop_m1>; + #power-domain-cells = <0>; }; - pd_vi@PX30_PD_VI { + power-domain@PX30_PD_VI { reg = <PX30_PD_VI>; clocks = <&cru ACLK_CIF>, <&cru ACLK_ISP>, @@ -311,11 +317,13 @@ pm_qos = <&qos_isp_128>, <&qos_isp_rd>, <&qos_isp_wr>, <&qos_isp_m1>, <&qos_vip>; + #power-domain-cells = <0>; }; - pd_gpu@PX30_PD_GPU { + power-domain@PX30_PD_GPU { reg = <PX30_PD_GPU>; clocks = <&cru SCLK_GPU>; pm_qos = <&qos_gpu>; + #power-domain-cells = <0>; }; }; }; @@ -600,7 +608,7 @@ };
wdt: watchdog@ff1e0000 { - compatible = "snps,dw-wdt"; + compatible = "rockchip,px30-wdt", "snps,dw-wdt"; reg = <0x0 0xff1e0000 0x0 0x100>; clocks = <&cru PCLK_WDT_NS>; interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>; @@ -703,21 +711,15 @@ clock-names = "pclk", "timer"; };
- amba { - compatible = "simple-bus"; - #address-cells = <2>; - #size-cells = <2>; - ranges; - - dmac: dmac@ff240000 { - compatible = "arm,pl330", "arm,primecell"; - reg = <0x0 0xff240000 0x0 0x4000>; - interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, - <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; - clocks = <&cru ACLK_DMAC>; - clock-names = "apb_pclk"; - #dma-cells = <1>; - }; + dmac: dmac@ff240000 { + compatible = "arm,pl330", "arm,primecell"; + reg = <0x0 0xff240000 0x0 0x4000>; + interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>, + <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>; + arm,pl330-periph-burst; + clocks = <&cru ACLK_DMAC>; + clock-names = "apb_pclk"; + #dma-cells = <1>; };
tsadc: tsadc@ff280000 { @@ -733,9 +735,9 @@ rockchip,grf = <&grf>; rockchip,hw-tshut-temp = <120000>; pinctrl-names = "init", "default", "sleep"; - pinctrl-0 = <&tsadc_otp_gpio>; + pinctrl-0 = <&tsadc_otp_pin>; pinctrl-1 = <&tsadc_otp_out>; - pinctrl-2 = <&tsadc_otp_gpio>; + pinctrl-2 = <&tsadc_otp_pin>; #thermal-sensor-cells = <1>; status = "disabled"; }; @@ -784,6 +786,16 @@ rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; + + assigned-clocks = <&cru PLL_NPLL>, + <&cru ACLK_BUS_PRE>, <&cru ACLK_PERI_PRE>, + <&cru HCLK_BUS_PRE>, <&cru HCLK_PERI_PRE>, + <&cru PCLK_BUS_PRE>, <&cru SCLK_GPU>; + + assigned-clock-rates = <1188000000>, + <200000000>, <200000000>, + <150000000>, <150000000>, + <100000000>, <200000000>; };
pmucru: clock-controller@ff2bc000 { @@ -794,6 +806,13 @@ rockchip,grf = <&grf>; #clock-cells = <1>; #reset-cells = <1>; + + assigned-clocks = + <&pmucru PLL_GPLL>, <&pmucru PCLK_PMU_PRE>, + <&pmucru SCLK_WIFI_PMU>; + assigned-clock-rates = + <1200000000>, <100000000>, + <26000000>; };
usb2phy_grf: syscon@ff2c0000 { @@ -803,7 +822,7 @@ #address-cells = <1>; #size-cells = <1>;
- u2phy: usb2-phy@100 { + u2phy: usb2phy@100 { compatible = "rockchip,px30-usb2phy"; reg = <0x100 0x20>; clocks = <&pmucru SCLK_USBPHY_REF>; @@ -856,7 +875,6 @@ g-np-tx-fifo-size = <16>; g-rx-fifo-size = <280>; g-tx-fifo-size = <256 128 128 64 32 16>; - g-use-dma; phys = <&u2phy_otg>; phy-names = "usb2-phy"; power-domains = <&power PX30_PD_USB>; @@ -868,7 +886,6 @@ reg = <0x0 0xff340000 0x0 0x10000>; interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; - clock-names = "usbhost"; phys = <&u2phy_host>; phy-names = "usb"; power-domains = <&power PX30_PD_USB>; @@ -880,7 +897,6 @@ reg = <0x0 0xff350000 0x0 0x10000>; interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_HOST>; - clock-names = "usbhost"; phys = <&u2phy_host>; phy-names = "usb"; power-domains = <&power PX30_PD_USB>; @@ -910,13 +926,14 @@ status = "disabled"; };
- sdmmc: dwmmc@ff370000 { + sdmmc: mmc@ff370000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff370000 0x0 0x4000>; interrupts = <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>, <&cru SCLK_SDMMC_DRV>, <&cru SCLK_SDMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + bus-width = <4>; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -925,13 +942,14 @@ status = "disabled"; };
- sdio: dwmmc@ff380000 { + sdio: mmc@ff380000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff380000 0x0 0x4000>; interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>, <&cru SCLK_SDIO_DRV>, <&cru SCLK_SDIO_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + bus-width = <4>; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -940,13 +958,14 @@ status = "disabled"; };
- emmc: dwmmc@ff390000 { + emmc: mmc@ff390000 { compatible = "rockchip,px30-dw-mshc", "rockchip,rk3288-dw-mshc"; reg = <0x0 0xff390000 0x0 0x4000>; interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>, <&cru SCLK_EMMC_DRV>, <&cru SCLK_EMMC_SAMPLE>; - clock-names = "biu", "ciu", "ciu-drv", "ciu-sample"; + clock-names = "biu", "ciu", "ciu-drive", "ciu-sample"; + bus-width = <8>; fifo-depth = <0x100>; max-frequency = <150000000>; pinctrl-names = "default"; @@ -955,6 +974,42 @@ status = "disabled"; };
+ nfc: nand-controller@ff3b0000 { + compatible = "rockchip,px30-nfc"; + reg = <0x0 0xff3b0000 0x0 0x4000>; + interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&cru HCLK_NANDC>, <&cru SCLK_NANDC>; + clock-names = "ahb", "nfc"; + assigned-clocks = <&cru SCLK_NANDC>; + assigned-clock-rates = <150000000>; + pinctrl-names = "default"; + pinctrl-0 = <&flash_ale &flash_bus8 &flash_cle &flash_cs0 + &flash_rdn &flash_rdy &flash_wrn &flash_dqs>; + power-domains = <&power PX30_PD_MMC_NAND>; + status = "disabled"; + }; + + gpu_opp_table: opp-table2 { + compatible = "operating-points-v2"; + + opp-200000000 { + opp-hz = /bits/ 64 <200000000>; + opp-microvolt = <950000>; + }; + opp-300000000 { + opp-hz = /bits/ 64 <300000000>; + opp-microvolt = <975000>; + }; + opp-400000000 { + opp-hz = /bits/ 64 <400000000>; + opp-microvolt = <1050000>; + }; + opp-480000000 { + opp-hz = /bits/ 64 <480000000>; + opp-microvolt = <1125000>; + }; + }; + gpu: gpu@ff400000 { compatible = "rockchip,px30-mali", "arm,mali-bifrost"; reg = <0x0 0xff400000 0x0 0x4000>; @@ -965,6 +1020,7 @@ clocks = <&cru SCLK_GPU>; #cooling-cells = <2>; power-domains = <&power PX30_PD_GPU>; + operating-points-v2 = <&gpu_opp_table>; status = "disabled"; };
@@ -1017,7 +1073,6 @@ reset-names = "axi", "ahb", "dclk"; iommus = <&vopb_mmu>; power-domains = <&power PX30_PD_VO>; - rockchip,grf = <&grf>; status = "disabled";
vopb_out: port { @@ -1040,7 +1095,6 @@ compatible = "rockchip,iommu"; reg = <0x0 0xff460f00 0x0 0x100>; interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vopb_mmu"; clocks = <&cru ACLK_VOPB>, <&cru HCLK_VOPB>; clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; @@ -1059,7 +1113,6 @@ reset-names = "axi", "ahb", "dclk"; iommus = <&vopl_mmu>; power-domains = <&power PX30_PD_VO>; - rockchip,grf = <&grf>; status = "disabled";
vopl_out: port { @@ -1081,8 +1134,7 @@ vopl_mmu: iommu@ff470f00 { compatible = "rockchip,iommu"; reg = <0x0 0xff470f00 0x0 0x100>; - interrupts = <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>; - interrupt-names = "vopl_mmu"; + interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>; clocks = <&cru ACLK_VOPL>, <&cru HCLK_VOPL>; clock-names = "aclk", "iface"; power-domains = <&power PX30_PD_VO>; @@ -1091,102 +1143,102 @@ };
qos_gmac: qos@ff518000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff518000 0x0 0x20>; };
qos_gpu: qos@ff520000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff520000 0x0 0x20>; };
qos_sdmmc: qos@ff52c000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff52c000 0x0 0x20>; };
qos_emmc: qos@ff538000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538000 0x0 0x20>; };
qos_nand: qos@ff538080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538080 0x0 0x20>; };
qos_sdio: qos@ff538100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538100 0x0 0x20>; };
qos_sfc: qos@ff538180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff538180 0x0 0x20>; };
qos_usb_host: qos@ff540000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff540000 0x0 0x20>; };
qos_usb_otg: qos@ff540080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff540080 0x0 0x20>; };
qos_isp_128: qos@ff548000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548000 0x0 0x20>; };
qos_isp_rd: qos@ff548080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548080 0x0 0x20>; };
qos_isp_wr: qos@ff548100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548100 0x0 0x20>; };
qos_isp_m1: qos@ff548180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548180 0x0 0x20>; };
qos_vip: qos@ff548200 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff548200 0x0 0x20>; };
qos_rga_rd: qos@ff550000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550000 0x0 0x20>; };
qos_rga_wr: qos@ff550080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550080 0x0 0x20>; };
qos_vop_m0: qos@ff550100 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550100 0x0 0x20>; };
qos_vop_m1: qos@ff550180 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff550180 0x0 0x20>; };
qos_vpu: qos@ff558000 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff558000 0x0 0x20>; };
qos_vpu_r128: qos@ff558080 { - compatible = "syscon"; + compatible = "rockchip,px30-qos", "syscon"; reg = <0x0 0xff558080 0x0 0x20>; };
@@ -1358,7 +1410,7 @@ };
tsadc { - tsadc_otp_gpio: tsadc-otp-gpio { + tsadc_otp_pin: tsadc-otp-pin { rockchip,pins = <0 RK_PA6 RK_FUNC_GPIO &pcfg_pull_none>; };