From: Marcin Wojtas mw@semihalf.com
Because the mvpp2 driver now relies on the PHYLIB and the external MDIO driver, configuring low level SMI bus settings is redundant.
Signed-off-by: Marcin Wojtas mw@semihalf.com Tested-by: sa_ip-sw-jenkins sa_ip-sw-jenkins@marvell.com Reviewed-by: Kostya Porotchkin kostap@marvell.com Reviewed-by: Stefan Chulski stefanc@marvell.com Signed-off-by: Stefan Roese sr@denx.de ---
drivers/net/mvpp2.c | 12 ------------ 1 file changed, 12 deletions(-)
diff --git a/drivers/net/mvpp2.c b/drivers/net/mvpp2.c index 847007d5b487..2043bdf10aa4 100644 --- a/drivers/net/mvpp2.c +++ b/drivers/net/mvpp2.c @@ -5292,14 +5292,6 @@ static int mvpp2_write_hwaddr(struct udevice *dev) return mvpp2_prs_update_mac_da(port, port->dev_addr); }
-static int mvpp22_smi_phy_addr_cfg(struct mvpp2_port *port) -{ - writel(port->phyaddr, port->priv->iface_base + - MVPP22_SMI_PHY_ADDR_REG(port->gop_id)); - - return 0; -} - static int mvpp2_base_probe(struct udevice *dev) { struct mvpp2 *priv = dev_get_priv(dev); @@ -5422,10 +5414,6 @@ static int mvpp2_probe(struct udevice *dev) port->base = priv->iface_base + MVPP22_PORT_BASE + port->gop_id * MVPP22_PORT_OFFSET;
- /* Set phy address of the port */ - if (port->phyaddr < PHY_MAX_ADDR) - mvpp22_smi_phy_addr_cfg(port); - /* GoP Init */ gop_port_init(port); }