On Tue, Jul 9, 2019 at 10:55 AM Bartosz Golaszewski brgl@bgdev.pl wrote:
From: Bartosz Golaszewski bgolaszewski@baylibre.com
Now that we removed all legacy boards selecting TI_EMAC we can completely convert the driver code to using the driver model. This patch also updates all remaining users of davinci_emac.
Signed-off-by: Bartosz Golaszewski bgolaszewski@baylibre.com Tested-by: Adam Ford aford173@gmail.com #am3517-evm & da850-evm Reviewed-by: Ramon Fried rfried.dev@gmail.com
arch/arm/mach-davinci/cpu.c | 13 ----- arch/arm/mach-omap2/omap3/emac.c | 3 +- board/davinci/da8xxevm/da850evm.c | 6 -- board/davinci/da8xxevm/omapl138_lcdk.c | 14 ----- board/logicpd/am3517evm/am3517evm.c | 1 - board/ti/ti816x/evm.c | 3 +- configs/am3517_evm_defconfig | 1 + configs/da850evm_defconfig | 1 + configs/da850evm_direct_nor_defconfig | 1 + configs/da850evm_nand_defconfig | 1 + configs/omapl138_lcdk_defconfig | 1 + configs/ti816x_evm_defconfig | 1 + drivers/net/ti/davinci_emac.c | 77 ++++++++++++++------------ include/netdev.h | 1 - 14 files changed, 50 insertions(+), 74 deletions(-)
diff --git a/arch/arm/mach-davinci/cpu.c b/arch/arm/mach-davinci/cpu.c index f97ad3fc74..9fd6564d04 100644 --- a/arch/arm/mach-davinci/cpu.c +++ b/arch/arm/mach-davinci/cpu.c @@ -5,7 +5,6 @@ */
#include <common.h> -#include <netdev.h> #include <asm/arch/hardware.h> #include <asm/io.h>
@@ -90,15 +89,3 @@ int set_cpu_clk_info(void) gd->bd->bi_dsp_freq = 0; return 0; }
-/*
- Initializes on-chip ethernet controllers.
- to override, implement board_eth_init()
- */
-int cpu_eth_init(bd_t *bis) -{ -#if defined(CONFIG_DRIVER_TI_EMAC)
davinci_emac_initialize();-#endif
return 0;-} diff --git a/arch/arm/mach-omap2/omap3/emac.c b/arch/arm/mach-omap2/omap3/emac.c index c79e870183..fb0c9188f5 100644 --- a/arch/arm/mach-omap2/omap3/emac.c +++ b/arch/arm/mach-omap2/omap3/emac.c @@ -7,7 +7,6 @@ */
#include <common.h> -#include <netdev.h> #include <asm/io.h> #include <asm/arch/am35x_def.h>
@@ -24,5 +23,5 @@ int cpu_eth_init(bd_t *bis) reset &= ~CPGMACSS_SW_RST; writel(reset, &am35x_scm_general_regs->ip_sw_reset);
return davinci_emac_initialize();
return 0;} diff --git a/board/davinci/da8xxevm/da850evm.c b/board/davinci/da8xxevm/da850evm.c index a90b7a3538..a5c583444d 100644 --- a/board/davinci/da8xxevm/da850evm.c +++ b/board/davinci/da8xxevm/da850evm.c @@ -13,7 +13,6 @@ #include <environment.h> #include <i2c.h> #include <net.h> -#include <netdev.h> #include <spi.h> #include <spi_flash.h> #include <asm/arch/hardware.h> @@ -472,11 +471,6 @@ int board_eth_init(bd_t *bis) if (rmii_hw_init()) printf("RMII hardware init failed!!!\n"); #endif
if (!davinci_emac_initialize()) {printf("Error: Ethernet init failed!\n");return -1;}return 0;} #endif /* CONFIG_DRIVER_TI_EMAC */ diff --git a/board/davinci/da8xxevm/omapl138_lcdk.c b/board/davinci/da8xxevm/omapl138_lcdk.c index fe1bf44101..dd11551428 100644 --- a/board/davinci/da8xxevm/omapl138_lcdk.c +++ b/board/davinci/da8xxevm/omapl138_lcdk.c @@ -11,7 +11,6 @@ #include <common.h> #include <i2c.h> #include <net.h> -#include <netdev.h> #include <spi.h> #include <spi_flash.h> #include <asm/arch/hardware.h> @@ -229,19 +228,6 @@ int board_init(void)
#ifdef CONFIG_DRIVER_TI_EMAC
-/*
- Initializes on-board ethernet controllers.
- */
-int board_eth_init(bd_t *bis) -{
if (!davinci_emac_initialize()) {printf("Error: Ethernet init failed!\n");return -1;}return 0;-}
#endif /* CONFIG_DRIVER_TI_EMAC */
#define CFG_MAC_ADDR_SPI_BUS 0 diff --git a/board/logicpd/am3517evm/am3517evm.c b/board/logicpd/am3517evm/am3517evm.c index 10031a4801..bfd4e78274 100644 --- a/board/logicpd/am3517evm/am3517evm.c +++ b/board/logicpd/am3517evm/am3517evm.c @@ -28,7 +28,6 @@ #include <linux/usb/gadget.h> #include <linux/usb/musb.h> #include <i2c.h> -#include <netdev.h> #include "am3517evm.h"
DECLARE_GLOBAL_DATA_PTR; diff --git a/board/ti/ti816x/evm.c b/board/ti/ti816x/evm.c index 07a084bab8..240df8cbe1 100644 --- a/board/ti/ti816x/evm.c +++ b/board/ti/ti816x/evm.c @@ -9,7 +9,6 @@ #include <common.h> #include <environment.h> #include <spl.h> -#include <netdev.h> #include <asm/cache.h> #include <asm/io.h> #include <asm/arch/clock.h> @@ -56,7 +55,7 @@ int board_eth_init(bd_t *bis) printf("Unable to read MAC address. Set <ethaddr>\n"); }
return davinci_emac_initialize();
return 0;}
#ifdef CONFIG_SPL_BUILD diff --git a/configs/am3517_evm_defconfig b/configs/am3517_evm_defconfig index b9f59f3291..5cb76322df 100644 --- a/configs/am3517_evm_defconfig +++ b/configs/am3517_evm_defconfig @@ -44,6 +44,7 @@ CONFIG_SYS_NAND_BUSWIDTH_16BIT=y CONFIG_SYS_NAND_U_BOOT_LOCATIONS=y CONFIG_SYS_NAND_U_BOOT_OFFS=0x80000 CONFIG_SPL_NAND_SIMPLE=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_PINCTRL=y diff --git a/configs/da850evm_defconfig b/configs/da850evm_defconfig index c095058282..f7c679d3b5 100644 --- a/configs/da850evm_defconfig +++ b/configs/da850evm_defconfig @@ -59,6 +59,7 @@ CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_PINCTRL=y diff --git a/configs/da850evm_direct_nor_defconfig b/configs/da850evm_direct_nor_defconfig index 166e77b8e3..9b1da07384 100644 --- a/configs/da850evm_direct_nor_defconfig +++ b/configs/da850evm_direct_nor_defconfig @@ -50,6 +50,7 @@ CONFIG_DM_SPI_FLASH=y CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_PINCTRL=y diff --git a/configs/da850evm_nand_defconfig b/configs/da850evm_nand_defconfig index 7271016346..8f06b8592b 100644 --- a/configs/da850evm_nand_defconfig +++ b/configs/da850evm_nand_defconfig @@ -59,6 +59,7 @@ CONFIG_SPI_FLASH=y CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y CONFIG_SPI_FLASH_MTD=y +CONFIG_DM_ETH=y CONFIG_PINCTRL=y CONFIG_PINCTRL_SINGLE=y CONFIG_DM_SERIAL=y diff --git a/configs/omapl138_lcdk_defconfig b/configs/omapl138_lcdk_defconfig index 48f251ebb8..466ae860cd 100644 --- a/configs/omapl138_lcdk_defconfig +++ b/configs/omapl138_lcdk_defconfig @@ -49,6 +49,7 @@ CONFIG_SPI_FLASH=y CONFIG_SF_DEFAULT_SPEED=30000000 CONFIG_SPI_FLASH_STMICRO=y CONFIG_SPI_FLASH_WINBOND=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_DM_SERIAL=y diff --git a/configs/ti816x_evm_defconfig b/configs/ti816x_evm_defconfig index bf877f596b..b233ab8cc9 100644 --- a/configs/ti816x_evm_defconfig +++ b/configs/ti816x_evm_defconfig @@ -45,6 +45,7 @@ CONFIG_SYS_I2C_OMAP24XX=y CONFIG_MMC_OMAP_HS=y CONFIG_NAND=y CONFIG_SYS_NAND_BUSWIDTH_16BIT=y +CONFIG_DM_ETH=y CONFIG_MII=y CONFIG_DRIVER_TI_EMAC=y CONFIG_SYS_NS16550=y diff --git a/drivers/net/ti/davinci_emac.c b/drivers/net/ti/davinci_emac.c index 9d53984973..2bd9c51079 100644 --- a/drivers/net/ti/davinci_emac.c +++ b/drivers/net/ti/davinci_emac.c @@ -26,7 +26,6 @@ #include <net.h> #include <miiphy.h> #include <malloc.h> -#include <netdev.h> #include <linux/compiler.h> #include <asm/arch/emac_defs.h> #include <asm/io.h> @@ -107,8 +106,9 @@ static u_int8_t num_phy;
phy_t phy[CONFIG_SYS_DAVINCI_EMAC_PHY_COUNT];
-static int davinci_eth_set_mac_addr(struct eth_device *dev) +static int davinci_emac_write_hwaddr(struct udevice *dev) {
struct eth_pdata *pdata = dev_get_platdata(dev); unsigned long mac_hi; unsigned long mac_lo;@@ -118,12 +118,12 @@ static int davinci_eth_set_mac_addr(struct eth_device *dev) * Using channel 0 only - other channels are disabled * */ writel(0, &adap_emac->MACINDEX);
mac_hi = (dev->enetaddr[3] << 24) |(dev->enetaddr[2] << 16) |(dev->enetaddr[1] << 8) |(dev->enetaddr[0]);mac_lo = (dev->enetaddr[5] << 8) |(dev->enetaddr[4]);
mac_hi = (pdata->enetaddr[3] << 24) |(pdata->enetaddr[2] << 16) |(pdata->enetaddr[1] << 8) |(pdata->enetaddr[0]);mac_lo = (pdata->enetaddr[5] << 8) |(pdata->enetaddr[4]); writel(mac_hi, &adap_emac->MACADDRHI);#if defined(DAVINCI_EMAC_VERSION2) @@ -411,7 +411,7 @@ static void __attribute__((unused)) davinci_eth_gigabit_enable(int phy_addr) }
/* Eth device open */ -static int davinci_eth_open(struct eth_device *dev, bd_t *bis) +static int davinci_emac_start(struct udevice *dev) { dv_reg_p addr; u_int32_t clkdiv, cnt, mac_control; @@ -447,7 +447,7 @@ static int davinci_eth_open(struct eth_device *dev, bd_t *bis) writel(1, &adap_emac->TXCONTROL); writel(1, &adap_emac->RXCONTROL);
davinci_eth_set_mac_addr(dev);
davinci_emac_write_hwaddr(dev); /* Set DMA 8 TX / 8 RX Head pointers to 0 */ addr = &adap_emac->TX0HDP;@@ -588,7 +588,7 @@ static void davinci_eth_ch_teardown(int ch) }
/* Eth device close */ -static void davinci_eth_close(struct eth_device *dev) +static void davinci_emac_stop(struct udevice *dev) { debug_emac("+ emac_close\n");
@@ -619,8 +619,8 @@ static int tx_send_loop = 0;
- This function sends a single packet on the network and returns
- positive number (number of bytes transmitted) or negative for error
*/ -static int davinci_eth_send_packet (struct eth_device *dev,
void *packet, int length)+static int davinci_emac_send(struct udevice *dev,
void *packet, int length){ int ret_status = -1; int index; @@ -672,7 +672,7 @@ static int davinci_eth_send_packet (struct eth_device *dev, /*
- This function handles receipt of a packet from the network
*/ -static int davinci_eth_rcv_packet (struct eth_device *dev) +static int davinci_emac_recv(struct udevice *dev, int flags, uchar **packetp) { volatile emac_desc *rx_curr_desc; volatile emac_desc *curr_desc; @@ -682,6 +682,7 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) rx_curr_desc = emac_rx_active_head; if (!rx_curr_desc) return 0;
*packetp = rx_curr_desc->buffer; status = rx_curr_desc->pkt_flag_len; if ((status & EMAC_CPPI_OWNERSHIP_BIT) == 0) { if (status & EMAC_CPPI_RX_ERROR_FRAME) {@@ -693,7 +694,6 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) rx_curr_desc->buff_off_len & 0xffff;
invalidate_dcache_range(tmp, tmp + ALIGN(len, PKTALIGN));
net_process_received_packet(rx_curr_desc->buffer, len); ret = len; }@@ -742,6 +742,7 @@ static int davinci_eth_rcv_packet (struct eth_device *dev) } return (ret); }
return (0);}
@@ -750,30 +751,12 @@ static int davinci_eth_rcv_packet (struct eth_device *dev)
- EMAC modules power or pin multiplexors, that is done by board_init()
- much earlier in bootup process. Returns 1 on success, 0 otherwise.
*/ -int davinci_emac_initialize(void) +static int davinci_emac_probe(struct udevice *dev) { u_int32_t phy_id; u_int16_t tmp; int i; int ret;
struct eth_device *dev;dev = malloc(sizeof *dev);if (dev == NULL)return -1;memset(dev, 0, sizeof *dev);strcpy(dev->name, "DaVinci-EMAC");dev->iobase = 0;dev->init = davinci_eth_open;dev->halt = davinci_eth_close;dev->send = davinci_eth_send_packet;dev->recv = davinci_eth_rcv_packet;dev->write_hwaddr = davinci_eth_set_mac_addr;eth_register(dev); davinci_eth_mdio_enable();@@ -854,5 +837,29 @@ int davinci_emac_initialize(void) phy[i].auto_negotiate(i); } #endif
return(1);
return 0;}
+static const struct eth_ops davinci_emac_ops = {
.start = davinci_emac_start,.send = davinci_emac_send,.recv = davinci_emac_recv,.stop = davinci_emac_stop,.write_hwaddr = davinci_emac_write_hwaddr,+};
+static const struct udevice_id davinci_emac_ids[] = {
{ .compatible = "ti,davinci-dm6467-emac" },{ .compatible = "ti,am3517-emac", },{ .compatible = "ti,dm816-emac", },{ }+};
+U_BOOT_DRIVER(davinci_emac) = {
.name = "davinci_emac",.id = UCLASS_ETH,.of_match = davinci_emac_ids,.probe = davinci_emac_probe,.ops = &davinci_emac_ops,.platdata_auto_alloc_size = sizeof(struct eth_pdata),+}; diff --git a/include/netdev.h b/include/netdev.h index 0a1a3a2d8d..a40c4adaad 100644 --- a/include/netdev.h +++ b/include/netdev.h @@ -30,7 +30,6 @@ int bcm_sf2_eth_register(bd_t *bis, u8 dev_num); int bfin_EMAC_initialize(bd_t *bis); int calxedaxgmac_initialize(u32 id, ulong base_addr); int cs8900_initialize(u8 dev_num, int base_addr); -int davinci_emac_initialize(void); int dc21x4x_initialize(bd_t *bis); int designware_initialize(ulong base_addr, u32 interface); int dm9000_initialize(bd_t *bis); -- 2.21.0
Reviewed-By: Ramon Fried rfried.dev@gmail.com