On 9/9/22 16:23, Kunihiko Hayashi wrote:
This patch defines a quirk to disable the block count for single block transactions.
This is similar to Linux kernel commit d3fc5d71ac4d ("mmc: sdhci: add a quirk for single block transactions").
Signed-off-by: Kunihiko Hayashi hayashi.kunihiko@socionext.com Reviewed-by: Jaehoon Chung jh80.chung@samsung.com
Applied to u-boot-mmc. Thanks!
Best Regards, Jaehoon Chung
drivers/mmc/sdhci.c | 8 +++++--- include/sdhci.h | 1 + 2 files changed, 6 insertions(+), 3 deletions(-)
diff --git a/drivers/mmc/sdhci.c b/drivers/mmc/sdhci.c index bf989a594f7e..a80ad8329a38 100644 --- a/drivers/mmc/sdhci.c +++ b/drivers/mmc/sdhci.c @@ -211,7 +211,7 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, unsigned int stat = 0; int ret = 0; int trans_bytes = 0, is_aligned = 1;
- u32 mask, flags, mode;
- u32 mask, flags, mode = 0; unsigned int time = 0; int mmc_dev = mmc_get_blk_desc(mmc)->devnum; ulong start = get_timer(0);
@@ -273,10 +273,12 @@ static int sdhci_send_command(struct mmc *mmc, struct mmc_cmd *cmd, /* Set Transfer mode regarding to data flag */ if (data) { sdhci_writeb(host, 0xe, SDHCI_TIMEOUT_CONTROL);
mode = SDHCI_TRNS_BLK_CNT_EN;
if (!(host->quirks & SDHCI_QUIRK_SUPPORT_SINGLE))mode = SDHCI_TRNS_BLK_CNT_EN;
mode |= SDHCI_TRNS_MULTI;
mode |= SDHCI_TRNS_MULTI | SDHCI_TRNS_BLK_CNT_EN;if (data->flags == MMC_DATA_READ) mode |= SDHCI_TRNS_READ;
diff --git a/include/sdhci.h b/include/sdhci.h index 88f1917480b6..24b4599b857d 100644 --- a/include/sdhci.h +++ b/include/sdhci.h @@ -247,6 +247,7 @@ #define SDHCI_QUIRK_WAIT_SEND_CMD (1 << 6) #define SDHCI_QUIRK_USE_WIDE8 (1 << 8) #define SDHCI_QUIRK_NO_1_8_V (1 << 9) +#define SDHCI_QUIRK_SUPPORT_SINGLE (1 << 10)
/* to make gcc happy */ struct sdhci_host;