Hello Richard,
WR> In cpu/arm925/interrupts.c. Remove the hard coded delay loops which are WR> wrapped with INNOVATOROMAP1510. This enables the code which will use ARM WR> timers (which are driven by the 12MHz reference / by a factor in the header WR> file). This should provide constant time irrespective to your cpu dpll WR> speed. This is what I use in (though not with innovator).
WR> This will fix some problems, and it "might" fix your problem. It will WR> probably make your boot speed correct, but it still sounds like some clock WR> is not set properly. I have a bit more fixed up dpll setup code which I WR> will get around to sending in sometime. WR> Regards, WR> Richard W.
Yes - it is work - now all is correct. I've removed (commented) these wrapped lines and seconds came to normal duration. What was a reason to put this delay loops?
Best regards, Grigory mailto:Ryhor@tut.by