Simplify move to DM to avoid handling with eth_device structure.
Signed-off-by: Michal Simek michal.simek@xilinx.com ---
drivers/net/xilinx_axi_emac.c | 16 +++++++--------- 1 file changed, 7 insertions(+), 9 deletions(-)
diff --git a/drivers/net/xilinx_axi_emac.c b/drivers/net/xilinx_axi_emac.c index 20ff6b089830..77b1869dc9dc 100644 --- a/drivers/net/xilinx_axi_emac.c +++ b/drivers/net/xilinx_axi_emac.c @@ -315,9 +315,9 @@ static void axiemac_halt(struct eth_device *dev) debug("axiemac: Halted\n"); }
-static int axi_ethernet_init(struct eth_device *dev) +static int axi_ethernet_init(struct axidma_priv *priv) { - struct axi_regs *regs = (struct axi_regs *)dev->iobase; + struct axi_regs *regs = priv->iobase; u32 timeout = 200;
/* @@ -374,9 +374,8 @@ static int axiemac_setup_mac(struct eth_device *dev) }
/* Reset DMA engine */ -static void axi_dma_init(struct eth_device *dev) +static void axi_dma_init(struct axidma_priv *priv) { - struct axidma_priv *priv = dev->priv; u32 timeout = 500;
/* Reset the engine so the hardware starts from a known state */ @@ -410,10 +409,10 @@ static int axiemac_init(struct eth_device *dev, bd_t * bis) * reset, and since AXIDMA reset line is connected to AxiEthernet, this * would ensure a reset of AxiEthernet. */ - axi_dma_init(dev); + axi_dma_init(priv);
/* Initialize AxiEthernet hardware. */ - if (axi_ethernet_init(dev)) + if (axi_ethernet_init(priv)) return -1;
/* Disable all RX interrupts before RxBD space setup */ @@ -511,10 +510,9 @@ static int axiemac_send(struct eth_device *dev, void *ptr, int len) return 0; }
-static int isrxready(struct eth_device *dev) +static int isrxready(struct axidma_priv *priv) { u32 status; - struct axidma_priv *priv = dev->priv;
/* Read pending interrupts */ status = in_be32(&priv->dmarx->status); @@ -539,7 +537,7 @@ static int axiemac_recv(struct eth_device *dev) u32 temp;
/* Wait for an incoming packet */ - if (!isrxready(dev)) + if (!isrxready(priv)) return 0;
debug("axiemac: RX data ready\n");