The tftppath was not set in case of run ramfs. It worked only by chance if was already set before.
Also check the boardname before setting the tftppath for COGE5.
Signed-off-by: Holger Brunck holger.brunck@ch.abb.com CC: Tom Rini trini@konsulko.com --- board/keymile/scripts/develop-common.txt | 3 ++- board/keymile/scripts/ramfs-common.txt | 9 +++++---- 2 files changed, 7 insertions(+), 5 deletions(-)
diff --git a/board/keymile/scripts/develop-common.txt b/board/keymile/scripts/develop-common.txt index 265f02f4ec..ba15323a5b 100644 --- a/board/keymile/scripts/develop-common.txt +++ b/board/keymile/scripts/develop-common.txt @@ -1,6 +1,6 @@ altbootcmd=run ${subbootcmds} bootcmd=run ${subbootcmds} -configure=run set_uimage; setenv tftppath ${IVM_Symbol} ; km_setboardid && saveenv && reset +configure=run set_uimage; run set_tftppath; km_setboardid && saveenv && reset subbootcmds=tftpfdt tftpkernel nfsargs add_default boot nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${toolchain}/${arch} tftpfdt=if run set_fdthigh || test ${arch} != arm; then if tftpboot ${fdt_addr_r} ${tftppath}/fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; then; else tftpboot ${fdt_addr_r} ${tftppath}/${hostname}.dtb; fi; else true; fi @@ -8,3 +8,4 @@ tftpkernel=tftpboot ${load_addr_r} ${tftppath}/${uimage} toolchain=/opt/eldk rootfssize=0 set_uimage=printenv uimage || setenv uimage uImage +set_tftppath=if test ${hostname} = kmcoge5un; then setenv tftppath CI5UN; else if test ${hostname} = kmcoge5ne; then setenv tftppath CI5NE; else setenv tftppath ${IVM_Symbol}; fi; fi diff --git a/board/keymile/scripts/ramfs-common.txt b/board/keymile/scripts/ramfs-common.txt index d79ad2e21b..61357e2c34 100644 --- a/board/keymile/scripts/ramfs-common.txt +++ b/board/keymile/scripts/ramfs-common.txt @@ -4,10 +4,11 @@ altbootcmd=run ${subbootcmds} bootcmd=run ${subbootcmds} subbootcmds=tftpfdt tftpkernel setrootfsaddr tftpramfs flashargs add_default addpanic addramfs boot nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} -configure=run set_uimage; km_setboardid && saveenv && reset +configure=run set_uimage; run set_tftppath; km_setboardid && saveenv && reset rootfsfile=${hostname}/rootfsImage setrootfsaddr=setexpr value ${pnvramaddr} - ${rootfssize} && setenv rootfsaddr 0x${value} -tftpfdt=if run set_fdthigh || test ${arch} != arm; then tftpboot ${fdt_addr_r} ${hostname}/${hostname}.dtb; else true; fi -tftpkernel=tftpboot ${load_addr_r} ${hostname}/${uimage} -tftpramfs=tftpboot ${rootfsaddr} ${hostname}/rootfsImage +tftpfdt=if run set_fdthigh || test ${arch} != arm; then if tftpboot ${fdt_addr_r} ${tftppath}/fdt_0x${IVM_BoardId}_0x${IVM_HWKey}.dtb; then; else tftpboot ${fdt_addr_r} ${tftppath}/${hostname}.dtb; fi; else true; fi +tftpkernel=tftpboot ${load_addr_r} ${tftppath}/${uimage} +tftpramfs=tftpboot ${rootfsaddr} ${tftppath}/rootfsImage set_uimage=printenv uimage || setenv uimage uImage +set_tftppath=if test ${hostname} = kmcoge5un; then setenv tftppath CI5UN; else if test ${hostname} = kmcoge5ne; then setenv tftppath CI5NE; else setenv tftppath ${IVM_Symbol}; fi; fi