Add GD25LQ24C 64Mbit chip to spi-nor id table. This chip is used on rk3399-gru-kevin:
=> sf probe SF: Detected gd25lq64c with page size 256 Bytes, erase size 4 KiB, total 8 MiB => sf erase 0x600000 0x200000 SF: 2097152 bytes @ 0x600000 Erased: OK => sf test 0x700000 0x1000 SPI flash test: 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps Test passed 0 erase: 52 ticks, 76 KiB/s 0.608 Mbps 1 check: 5 ticks, 800 KiB/s 6.400 Mbps 2 write: 14 ticks, 285 KiB/s 2.280 Mbps 3 read: 3 ticks, 1333 KiB/s 10.664 Mbps
The values are the same as in Linux, except adjusted for the U-Boot definition of INFO().
Signed-off-by: Alper Nebi Yasak alpernebiyasak@gmail.com --- This is from Linux's drivers/mtd/spi-nor/gigadevice.c which is GPL-2.0, but the U-Boot file is marked as GPL-2.0+ (which is AFAICT incorrect, see the previous patch).
drivers/mtd/spi/spi-nor-ids.c | 5 +++++ 1 file changed, 5 insertions(+)
diff --git a/drivers/mtd/spi/spi-nor-ids.c b/drivers/mtd/spi/spi-nor-ids.c index 4de60b0165fd..cc3a54eaf563 100644 --- a/drivers/mtd/spi/spi-nor-ids.c +++ b/drivers/mtd/spi/spi-nor-ids.c @@ -107,6 +107,11 @@ const struct flash_info spi_nor_ids[] = { SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) }, + { + INFO("gd25lq64c", 0xc86017, 0, 64 * 1024, 128, + SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | + SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB) + }, { INFO("gd25q128", 0xc84018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |